-
Designed, engineered, tested, and assembled in Colorado, SPC Performance adjustable upper control arms are loaded with features. Improve suspension travel, handling, and tire wear while centering the tire in the wheel well for maximum clearance needed for oversized tires. Now equipped with maintenance-free ball joints and free-pivoting xAxis™ sealed flex joints in bonded rubber sleeves, for correction of alignment angles and restoration of factory ride quality. SPC’s tubular steel and billet adjuster plate design provides the strength and durability needed for the most demanding environments. SPC adjustable control arms have improved clearance to get around the spring bucket and a full 80° of articulation in the ball joint. When trucks are lifted, caster and camber angles are affected that can lead to poor handling characteristics such as ‘wandering’. SPC control arms have positive caster built-in for lifted vehicles to restore alignment angles and drivability. The patented ball joint design allows the tire to be positioned correctly in the wheel well and additional adjustment in the OE lower arms can maximize placement for oversized tires to avoid fender trimming. If replacement lower adjustment cams are needed, see part #25450. Sold as pairs. US Patent No. 7,513,514.
Adjustable front upper control arms for the Toyota Land Cruiser and Lexus LX 570 with tubular steel construction, sealed modern architecture ball joints, and xAxis™ sealed flex joint joints in bonded rubber bushings
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- Arm’s adjustability combine with OE adjusters corrects alignment angles for improved drivability and reduced tire wear & makes it possible to move the tire forward to maximize clearance for larger tires without frame or fender modifications
- Ball joint’s one piece polymer race with modern grease formula ensures quiet smooth operation & low turning torque for reduced wear and extended life that tests like OE
- New ball joint has 25% larger stud cross section than OE for superior strength & E-Nickel coating for superior corrosion protection while providing 80° of articulation
- New xAxis™ sealed flex joints in bonded rubber bushings allow for extended suspension travel & superior noise vibration and harshness (NVH) characteristics
- Forged steel arm construction provides maximum strength & clearance with additional caster provision for lifted vehicles built-in
- New fully sealed ball joint architecture keeps grease in and contaminants out for a maintenance-free joint
- Front Adjustment Range: Camber ±2.00° / Caster 0.00° to +4.00°
- Required: 1 per axle
- Sold as a pair
-
This is the perfect kit for lowered Zs or G35s and G37s Infinitis. Provides additional camber and comes with a larger offset toe cam to bring the toe angle back into range. Use the 85130 rotary file to elongate the toe slots. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- Provides additional camber and comes with a larger offset toe cam
- Use SPC rotary file #85130 to extend the factory slots
- Perfect kit for lowered Zs or G35s and G37s Infinitis
- Designed for the performance enthusiast
-
This pair of front upper control arms will give you +/- 1deg caster and +/-2.5deg camber change. Simply replace the OE front upper control arms and dial in your suspension angles with our patented sliding ball joint and caster plate. Whether you want to tune your suspension for the ultimate in handling performance, minimize tire wear or easily move back and forth between two settings, these are the arms to get the job done. These arms feature our Jounce Spacers for a quieter, OEM style ride. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- Easily make alignment adjustments with the pattented sliding ball joint design
- Adjusts camber plus or minus 2.5 degrees
- Adjusts caster plus or minus 1.0 degrees
- Tubular design reduces weight
- Install one kit per vehicle
- Includes Jounce bumpers
-
This adjustable front control arm fits these popular Dodge and Chrysler vehicles and provides both camber and caster changes. Easy to install and even easier to adjust, this is the perfect kit for standard alignment issues as well as special suspension tuning problems that occur when you lower these vehicles for performance or appearance. Our tubular design incorporates our low-profile adjustable ball joint. ball joint. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented. -
Adjust front camber and caster +-1.5deg on the Audi B8 and C7 platforms with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, and harshness (NVH) parameters. Audi’s unique multi-link suspension creates a ‘Virtual’ SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. This kit includes four arms to replace both upper links on both sides of the vehicle. For the left hand (LH) side, use #81361. For the right hand (RH) side, use part number #81362. SPC Arms Feature: Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts included Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- Kit includes both arms for both sides of the vehicle, order one kit per vehicle
- OE style bushing and ball joint maintain factory feel and noise reduction
- Forged 6051-T6 aluminum for strength and weight reduction
- Adjusts camber and caster plus or minus 1.5 degrees
- Comes with pinch bolt hardware
-
Adjust front camber and caster +-1.5deg on the Audi B8 and C7 platforms with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, & harshness (NVH) parameters. Audi’s unique multi-link suspension creates a ‘Virtual’ SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. This kit includes two arms to replace the front upper arms on the left hand (LH) side. For the right hand (RH) side, use part number #81362. Want to be able to adjust both sides? Use part number #81363. SPC Arms Feature: Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts included Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- OE style bushing and ball joint maintain factory feel and noise reduction
- Forged 6051-T6 aluminum for strength and weight reduction
- Adjusts camber and caster plus or minus 1.5 degrees
- Kit includes both arms for the LEFT side only
- Comes with pinch bolt hardware
-
Adjust front camber and caster +-1.5deg on the Audi B8 and C7 platforms with these forged aluminum control arms from SPC. OE syle booted ball joints and bonded rubber bushings maintain factory ride, handling, and noise, vibration, & harshness (NVH) parameters. Audi’s unique multi-link suspension creates a ‘Virtual’ SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. This kit includes two arms to replace the two front upper arms on the right hand (RH) side. For the left hand (LH) side, use part number #81361. Want to be able to adjust both sides? Use part number #81363. SPC Arms Feature: Forged 6061-T6 Aluminum construction formaximized strength at a minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts included Need to replace the ball joint boots on these arms? We have replacement kitsavailable! Part No. 81354. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- OE style bushing and ball joint maintain factory feel and noise reduction
- Forged 6051-T6 aluminum for strength and weight reduction
- Adjusts camber and caster plus or minus 1.5 degrees
- Kit includes both arms for the RIGHT side only
- Comes with pinch bolt hardware
-
Get ready for the track with this four (4) arm set of adjustable upper links for the Audi B8 and C7 platforms. This kit has four arms so you can change camber and caster +-1.5deg on both sides. xAxis sealed flex joints replace the compliant inner bushings with a free pivoting, minimum compliance joint. You will feel the difference in handling. SPC Arms feature: Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts xAxis sealed flex joints replacing overly compliant OE inner bushings with a free pivoting, minimum compliance joint Don’t need the added benefits of our performance arms? Use SPC arms with OE type bushings – part #81363 for two sets of arms to correct both sides of the vehicle, #81361 for the left side, or part #81362 for the right. Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354. Warning: You will also hear the difference, the OE bushings are designed to absorb and negate noise, vibration, and harshness (NVH). This set of arms will transmit road noise into the cabin. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented. -
Adjust camber in the rear of many popular VW and Audi models +-3deg with this fully adjustable rear camber arm from SPC. The forged steel arm and double threaded adjuster offer the strength and on-car adjustment needed for the track or simply getting tiresback to factory specifications. SPC’s arm uses bonded rubber bushings to maintain factory noise, vibration, and harshness (NVH) values. Use the included bracket to properly secure the factory ABS wire. The arm is sold each and can be used for either the right or left hand side. Be sure to order two kits if you need adjustment on both sides. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented. -
Replace the rear camber and toe links on your S550 Mustang with SPC’s forged aluminum adjustable links and be confident you will have the most change and lightest weight, with uncompromised strength and clearances. Designed, engineered, tested, and assembled in Colorado, SPC’s forged aluminum links will provide: -3 to +2 degrees of camber adjustment and +-3 degrees of additional toe compared to the OE cam. This set includes 2 each of the 72370 and 72380, see individual part descriptions for full details.This is a four (4) arm set. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- Adjusts camber plus 2.0 degrees to minus 3.0 Degrees and toe plus or minus 3 degrees
- Stronger, more robust arm than the OE arm
- Reduced weight vs the OE arm
- One kit per axle
-
Upgrade your rear suspension for added toe adjustment and reduced weight vs the OE link with this adjustable aluminum control arm from SPC. This lower arm features a xAxis sealed flex joint that performs like a monoball, but is greased and booted, providing maintenance free unsprung travel. Fully forged with T6 aluminum, SPC’s high strength arm will inspire confidence on the track while withstanding the rigors of street driving. The included lockout plate replaces the factory toe cam to make sure your toe settings can’t slip, even under the most extreme loads. (Arm is sold individually (ea.), consider 5 arm set 72360 to upgrade camber and toe links on both sides of your s550) California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- Turnbuckle style adjusters make alignment adjustment smooth and easy
- includes SPC’s xAxis sealed flex joint for enhanced handling
- Includes hardware for the outboard end
- Adjusts toe plus or minus 3.0 degrees
- Requires one per wheel
- Forged T6 aluminum
-
Get your 10th generation Civic ready for the track with SPC’s forged aluminum adjustable rear camber arm. SPC forged aircraft grade aluminum arm weights less than the OE arm it will replace. The arm is built with SPC’s xAxis sealed flex joint to reduce compliance. Its unique adjustment design permits on-car adjustment of +-3.0deg camber. Whether you need negative camber and reduced compliance for the track or want to get back to OE specifications this is the arm for you. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- Forged aluminum design adds strength and reduces weight
- Rubber bonded T-bar bushing retains factory NVR
- xAxis sealed flex joint enhances handling
- Adjusts camber plus or minus 3.0 degrees
- Requires one per wheel
Showing 39241–39252 of 46979 results