-
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-813. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2017-2019 Audi Q7 3.0L. MagnaFlow 21-813 includes (3) Bolts, (2) Flange Gaskets, (1) Flat Washer, (1) Nut and interchanges with OE parts 4M0 254 252 AX, 4M0 254 252 RX. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Magnaflow OEM Grade Direct-Fit Catalytic Converter
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-813. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2017-2019 Audi Q7 and interchanges with OE parts 4M0 254 252 RX and 4M0 254 252 AX. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
- Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
- OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
- Your Trusted Source For EPA-Compliant Catalytic Converters
- Mandrel Bent Tubing Retains Oem-Like Design And Geometry
- Durable 308 Stainless Steel Mig Welds
-
The MagnaFlow 2015-2023 Dodge Charger Competition Series Cat-Back Performance Exhaust System brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 5.7L, 6.2L, 6.4L 2015-2023 Dodge Charger with dyno-proven performance made possible thanks to fast-flowing mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 19371 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19371’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.
Magnaflow Competition Series Stainless Cat-Back System
The MagnaFlow 2015-2023 Dodge Charger Competition Series Cat-Back Performance Exhaust System 19371 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 5.7L, 6.2L, 6.4L 2015-2023 Dodge Charger with dyno-proven performance made possible thanks to fast-flowing mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 19371 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19371’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.- Crafted From 409 Stainless Steel With All Mandrel-Bent Tubing
- Increased Horsepower And Torque
- Aggressive exterior sound
-
The MagnaFlow 2017-2020 Honda Civic Competition Series Cat-Back Performance Exhaust System brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 1.5L 2017-2020 Honda Civic with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Dual Center Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 19394 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19394’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.
Magnaflow Competition Series Stainless Cat-Back System
The MagnaFlow 2017-2020 Honda Civic Competition Series Cat-Back Performance Exhaust System 19394 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 1.5L 2017-2020 Honda Civic with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Dual Center Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 19394 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19394’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.- Crafted From 409 Stainless Steel With All Mandrel-Bent Tubing
- Increased Horsepower And Torque
- Aggressive exterior sound
-
The MagnaFlow 2018-2025 Jeep Wrangler Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.0L 2018-2025 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19438 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19438 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.
Magnaflow Street Series Stainless Cat-Back System
The MagnaFlow 2018-2024 Jeep Wrangler Street Series Cat-Back Performance Exhaust System 19438 brings out the personality of your 2.0L 2018-2024 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19438 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19438 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-Proven Performance
-
The MagnaFlow 2018-2023 Kia Stinger Competition Series Cat-Back Performance Exhaust System 19406 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 3.3L 2018-2023 Kia Stinger with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 6 Straight-Through;Tuned Chamber mufflers ending in a Quad Split Rear exit featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 19406 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19406’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.
Magnaflow Competition Series Stainless Cat-Back System
Need further assistance? Call 1-800-990-0905.- Crafted From 409 Stainless Steel With All Mandrel-Bent Tubing
- Increased horsepower and torque
- Aggressive Exterior Sound
-
The MagnaFlow 2018-2025 Jeep Wrangler Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.6L 2018-2025 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Black Coated Welded-On Double Wall Angle Cut Folded Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19417 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19417 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.
MagnaFlow Street Series Black Coated Cat-Back System
The MagnaFlow 2018-2023 Jeep Wrangler Street Series Cat-Back Performance Exhaust System 19417 brings out the personality of your 3.6L 2018-2023 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Black Coated Welded-On Double Wall Angle Cut Folded Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19417 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19417 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.- Durable Corrosion-Resistant Stainless Steel Construction
- CNC precision robotic manufacturing techniques
- Dyno-Proven Performance
-
The MagnaFlow 2018-2025 Jeep Wrangler Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.6L 2018-2025 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19416 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19416 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.
Magnaflow Street Series Stainless Cat-Back System
The MagnaFlow 2018-2023 Jeep Wrangler Street Series Cat-Back Performance Exhaust System 19416 brings out the personality of your 3.6L 2018-2023 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19416 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19416 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
-
MagnaFlow combines aggressive sound, free-flowing power and additional ground clearance for the best Jeep performance on and offroad. Features Black coated tips. MagnaFlow Performance Exhaust System Kit 19388 is made of durable stainless steel and built using CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime construction warranty and 1 year finish warranty.
MagnaFlow Street Series Black Coated Axle Back System
Need further assistance? Call 1-800-990-0905.- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
-
The MagnaFlow 2018-2025 Jeep Wrangler Street Series Axle-Back Performance Exhaust System brings enhanced engine sound and dyno-proven performance to your 2.0L, 3.6L 2018-2025 Jeep Wrangler with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Jeep Wrangler exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Jeep Wrangler’s exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19385 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.
Magnaflow Street Series Stainless Axle-Back System
The MagnaFlow 2018-2024 Jeep Wrangler Street Series Axle-Back Performance Exhaust System 19385 brings enhanced engine sound and dyno-proven performance to your 2.0L, 3.6L 2018-2024 Jeep Wrangler with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Jeep Wrangler exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Jeep Wrangler’s exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19385 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.- Durable Corrosion-Resistant Stainless Steel Construction
- CNC precision robotic manufacturing techniques
- Dyno-Proven Performance
-
The MagnaFlow® 2018-2026 Jeep Wrangler Rock Crawler Series™ Cat-Back Performance Exhaust System brings superior boulder-climbing capabilities to your 3.6L 2018-2026 Jeep Wrangler with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage of your rig for improved ground clearance. Exhaust kit 19386 is engineered to produce our powerful, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels. Extensive 3D scanning was used during the development of this Jeep Wrangler exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 19386’s emissions-legal cat-back design replaces all your rig’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a Single Straight Driver Side Rear exit. The turndown style tipless exit improves departure angles, allowing for more options when it comes to traversing tricky boulders and other off-road obstacles. Exhaust system 19386 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow®’s limited lifetime warranty.
Magnaflow Rock Crawler Series Stainless Cat-Back System
The MagnaFlow 2018-2023 Jeep Wrangler Rock Crawler Series Cat-Back Performance Exhaust System 19386 brings superior boulder-climbing capabilities to your 3.6L 2018-2023 Jeep Wrangler with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage of your rig for improved ground clearance. Exhaust kit 19386 is engineered to produce our powerful, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels. Extensive 3D scanning was used during the development of this Jeep Wrangler exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 19386’s emissions-legal cat-back design replaces all your rig’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a Single Straight Driver Side Rear exit. The turndown style tipless exit improves departure angles, allowing for more options when it comes to traversing tricky boulders and other off-road obstacles. Exhaust system 19386 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.- Extensive Off-Road Testing To Meet Your Sound And Performance Needs
- Aggressive Exterior Sound Tuning
- High Clearance Design
-
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280321. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2018-2023 Volkswagen Atlas 3.6L & 2020-2023 Volkswagen Atlas Cross Sport 3.6L. MagnaFlow 280321 includes (2) Washers, (2) Flange Gaskets, (2) Bolts, (2) Clamps, (2) Isolators and interchanges with OE parts 3QF 253 059 PX, 3QF 254 500 D, 3QF 254 500 DX, 3QF 254 500 KX, 3QF 254 500 MX. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Magnaflow OEM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California, Colorado or New York.- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
- Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
- Your Trusted Source For EPA-Compliant Catalytic Converters
- Durable 308 Stainless Steel Mig Welds
-
The Street Series Black Performance Exhaust system delivers dyno proven power with a comfortable interior sound and performance exterior sound. Features Black coated tips. MagnaFlow Performance Exhaust System Kit 19470 is made of durable stainless steel and built using CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime construction warranty and 1 year finish warranty.
Magnaflow Street Series Black Cat-Back System
Need further assistance? Call 1-800-990-0905.- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
Showing 39241–39252 of 60673 results