-
This F-150 Supercharger Kit delivers 590 HP and 590 LB/FT of torque to the 2011-2014 Ford F-150 6.2L-2v V8 powertrain, an increase of 179 HP and 156 FT/LB over stock.The ROUSH 2011-2014 6.2L F-150 Phase 2 Calibrated Supercharger Kit is part of the TVS line of superchargers developed by ROUSH that have raised the bar for performance and reliability. This is the same line that has been used and proven for years in ROUSH-built vehicles. The ROUSH R2300 supercharger features Eaton’s new TVS rotating assembly that delivers more power in a smaller package for uncompromising performance. The ROUSH R2300 TVS supercharger is a roots-type, positive displacement supercharger that features twin four-lobe rotors that are twisted 160-degrees. This technology greatly enhance thermal efficiency, deliver higher volumetric capacity, enable higher operating speeds, creates a smoother, more efficient flow of air into the engine and has improved noise and vibration characteristics.
ROUSH Phase 2 Supercharger Kit delivers 590 HP and 590 LB/FT of torque to the 2011-2014 Ford F-150 6.2L-2v V8 (including Raptor) powertrain, an increase of 179 HP and 156 FT/LB over stock.
This part now utilizes the ROUSH Flash Voucher card to be calibrated using ROUSH Diagnostic Tool (RDT) software and pass-thru device. If you do not have access to an approved pass-thru device, you can send your PCM back to ROUSH to be flashed for an additional $100.00 fee
2011-2014 Ford F-150 -
Unleash the hidden power in your 2011-2014 3.7L V6 Mustang with this premium quality ROUSH Performance Cold Air Intake Kit! Cold air induction is a more efficient air intake method than the factory air filtering process. Consequently, unrealized power and fuel efficiency that would normally be restrained by the stock air intake unit is attained. ROUSH Performance cold air intakes feature three main improvements: upgraded air dam, high flow air filter media, and cold air induction tube. Included with this kit will be a new induction tube, complete airbox assembly, premium synthetic washable/reusable filter (pre-oiled), and all necessary hardware and instructions to install. This kit is also backed by the ROUSH 90 Day Limited Parts Only Warranty.
This Mustang Cold Air Intake fits 3.7L V6 engine 2011-2014.
2011-2014 Mustang V6, Manual and Automatic Transmission, Coupe and Convertible
2011-2014 Ford Mustang -
Does your V6 Mustang Exhaust ROAR? Well it’s about time to give your ride the aggressive sound that it deserves with the ROUSH V6 Mustang Exhaust Kit. This kit fits 2011-2014 V6 Mustangs and features a all-new ROUSH open-chambered muffler with round tips. In contrast to the conventional fiberglass-packed muffler design, this open muffler has a less inhibited sound, increased longevity, and increased air flow for maximized power. Another great feature of this system is the elimination of the in-cockpit boom, which is common in performance exhaust systems at cruising speeds. Quality Construction The round tips of this Mustang dual exhaust kit are made from high-quality 304 stainless steel. The shiny finish of these tips are made with a special chrome flashing process that is dramatically more resistant to cracking and flaking than conventional chrome surfacing. The mufflers and inlet pipe are made from 409 stainless steel for improved durability.
V6 Mustang Exhaust Kits from ROUSH will give your 2011-2014 Mustang the ROAR it deserves. Hear the difference between the stock and ROUSH sound.
ROUSH Performance recommends checking your local noise ordinance levels prior to purchase.
2011-2014 Ford Mustang -
The ROUSH Axle-Back Mustang Exhaust Kit with Round Tips, designed to fit the 2011-2014 Mustang GT & 2011-2012 Mustang GT500, is an innovative exhaust system from ROUSH that features an open-chambered designed muffler. The result is an aggressive sound that is unique to ROUSH, increased longevity, and increased horsepower & with additional airflow. Another added benefit of this system is the lack of the in-cockpit boom normally found with performance exhaust systems at cruising speeds. Not only does this system sound awesome, it looks great as well! The round tips are made from high-quality 304 stainless steel and are finished with a chrome flashing process, and are embossed with the ROUSH logo on the end. The exhaust kit mounts to the factory mounting points, and includes all necessary hardware. This makes for easy installation to get you back on the road in no time. The mufflers and inlet pipe are made from 409 stainless steel for increased durability.
Your Mustang Exhaust will howl like never before with the ROUSH Mustang Exhaust with Round Tips. Fits 2011-2014 Models.
2011-2014 Mustang GT, Manual and Automatic Transmission, Coupe and Convertible
2011-2014 Ford Mustang / GT500 -
This F-150 Cold Air Intake fits the 2012-2014 F-150 3.5L-V6 EcoBoost Engine. Key features of the ROUSH 3.5L EcoBoost F-150 Cold Air Intake kit include: Easy installation in less than one hour and requires NO drilling or cutting, a washable reusable premium high flow air filter. Also included is an injection molded mass air pressure tube and air box lid for maximum air flow efficiency, designed and manufactured for superior structural durability.Please note that this kit is designed for the 2012-2014 model year 3.5L EcoBoost F-150’s and will NOT work with the 2011 model year (different MAP sensors).
Buy the ROUSH Cold Air Intake for 2012-2014 F-150 EcoBoost trucks and allow your truck to breathe easy with enhanced throttle response you can feel. Free shipping.
2012-2014 F-150 V8
2012-2014 Ford F-150 -
Give your 2015-2017 5.0L Mustang a more aggressive sound and boost performance with a ROUSH exhaust system. 2015-2017 ROUSH Axle Back exhaust systems are constructed of corrosion resistant T-304 stainless Steel and are mandrel bent. Mandrel bending maintains a constant inner diameter with no kinks or creases. This improves exhaust flow and reduces backpressure in the system. This system includes single tip High flow mufflers that improve the stock sound of the Mustang V8 This system will produce louder deeper exhaust tone, with a healthy V8 burble at idle, building to a powerful roar at high revs. Check your local noise ordinances for legality.
ROUSH Performance stainless steel high-performance axle back exhaust kit for 2015 5.0L V8 Ford Mustangs with round tips
2015-2017 5.0L Mustang, Manual and Automatic Transmission, Coupe and Convertible
2015-2017 Ford Mustang -
Give your 2015-2017 5.0L Mustang GT the signature ROUSH Performance sound, powerful looks, and boosted performance with this ROUSH Performance Cat-Back exhaust system. This 2015-2017 ROUSH Performance Cat-Back exhaust system is constructed of corrosion-resistant 304 stainless steel and is mandrel bent for high-performing airflow. This ROUSH Performance Cat-Back exhaust kit improves flow and reduces back pressure in your Mustang’s exhaust system thanks to hours of R&D, testing, and validation. This system includes a mandrel-bent x-pipe, mid-pipes, and dual high flow mufflers that improve the sound, performance, and flow characteristics of the Mustang’s V8 powerhouse, as well as ROUSH branded polished 304 stainless steel tips.ROUSH Performance recommends checking your local noise ordinances levels prior to purchase.
Powerful sound and looks, our 15-17 Cat-Back Exhaust kit for V8 Mustangs are made from 304 SS and include x-pipe, mid-pipe & dual tip mufflers for an aggressive tone.
2015-17 Mustang 5.0L
2015-2017 Ford Mustang -
Your F-150 will benefit greatly from the addition of this ROUSH Cold Air Intake Kit, which provides more efficient air intake than the stock air box. Providing up to 25% less intake restriction than stock in forced induction applications, this cold air intake kit ? the most highly-engineered kit of its kind on the market ? increases engine performance by over 28 RWHP and 27 ft-lbs RWTQ (tested on 2016 3.5L EcoBoost platform) with no PCM re-calibration required!The kit features increased inlet and air box sizing to allow for maximum airflow, and provides an additional induction noise and aggressive performance sound. It was designed using OEM CAD data to guarantee optimized fitment, keeping heat out and encouraging maximum performance. Our high-flow, high-capacity dry filter requires no oiling and is easily washable for re-use.
2015-2017 F-150 ROUSH 2.7L and 3.5L EcoBoost V6 Cold Air Intake Kit
2015-2017 F-150 3.5L/2.7L
2015-2017 Ford F-150 -
Your 2015-2017 Ford F-150 5.0L V8 will benefit greatly from the addition of this ROUSH Cold Air Intake Kit, which provides more efficient air intake than the stock air box. Providing up to 31% less intake restriction than stock in forced induction applications, this cold air intake kit ? the most highly-engineered kit of its kind on the market ? increases engine performance by over 13.9 RWHP and 19.7 lb-ft RWTQ with no PCM re-calibration required!The kit features increased inlet and air box sizing to allow for maximum airflow, and provides an additional induction noise and aggressive performance sound.Our high-flow, high-capacity dry filter is proven to retain its shape. The filter requires no oiling and is easily washable for re-use. Included in the kit is the air filter with clamp, oversized injection-molded air box tray, a clean air tube, 105mm mass air flow tube, and all required mounting hardware and instructions.
2015-2017 F-150 ROUSH 5.0L V8 Cold Air Intake Kit
2015-2017 F-150 5.0L
2015-2017 Ford F-150 -
ROUSH’s newly-designed cold air intake for the 2015-2017 2.3L I4 Ecoboost engine brings staggering performance increases that can be achieved with an installation that takes under an hour with no calibration required!The ROUSH EcoBoost Cold Air Intake replaces the restrictive stock air intake, unlocking latent power. There’s no need for a custom tune, as this CAI system was engineered and designed to work with the completely stock 2.3L I4 engine! Paired with Ford’s innovative EcoBoost engine, our ROUSH Cold Air Kit feeds cooler, denser air to the Turbo, increasing potential power output by up to 29 RWHP and 27 ft-lbs. RTWQ! Our kit is 74% less restrictive than the stock system at peak horsepower. Best of all, this system will not void your factory warranty! The filter is washable, re-usable and requires no oiling.The kit utilizes all factory emissions and vacuum lines. Factory mounting locations and hardware are utilized to allow for quick and easy installation.
2015 Mustang I4 Cold Air intake
2015-2017 2.3L Mustang, Manual and Automatic Transmission, Coupe and Convertible
2015-2017 Ford Mustang -
The all-new 2015-2017 Mustang 3.7L ROUSH V6 Cold Air Kit is the perfect addition to any 2015 V6 Mustang. A more efficient air-intake than the stock air filter assembly, ROUSH’s cold air kits unlock latent power potential and fuel efficiency that would otherwise be restricted. Custom calibration is not required and a noticeable increase of 10.5 hp and 9 lb-ft of torque is possible. This high flow system has 20% less intake restriction compared to the stock induction systemThe kit includes an dry filter that retains its shape during high airflow and is made up of an inner and outer layer of wire mesh that ensures durability and support of the filtration media. You don’t’ need to use messy oils to maintain this filter, just simply wash it and let it dry. The kit utilizes all factory emissions and vacuum lines. Factory mounting locations and hardware are utilized to allow for quick and easy installation.
2015-2017 Mustang V6 Cold Air intake
2015-2017 3.7L Mustang, Manual and Automatic Transmission, Coupe and Convertible
2015-2017 Ford Mustang -
The all-new 2015-2017 Mustang 5.0L ROUSH V8 Cold Air Kit is more efficient air-intake than the standard stock air box. Cold air induction allows for latent potential in power and fuel efficiency that would otherwise be restricted, as well as providing reduced pressure drop. A custom tune is not required as this CAI system was engineered and tested specifically for this application ensuring MAF signal performance matches factory settings. As a straight bolt on, with no tune, it’s possible to see gains of 10hp and 8 lb-ft of torque, a noticeable increase. The filter requires no oiling and is easily washable for re-use.Included in the kit is the air filter with clamp, injection-molded lower air box/tray with installed EPDM foam hood seal, Blow Molded clean air tubes and all required mounting hardware. The kit utilizes all factory emissions and vacuum lines. Factory mounting locations and hardware are utilized to allow for quick and easy installation.
2015-2017 Mustang V8 Cold Air intake
2015-2017 5.0L Mustang, Manual and Automatic Transmission, Coupe and Convertible
2015-2017 Ford Mustang
Showing 38029–38040 of 47459 results