-
Boost up the performance of your 2017-2021 Honda Civic Type R (FK8) with Injen’s all-new EVO1502 Evolution sealed cold air intake system. The EVO1502 cold air intake was designed using advanced engineering tools to offer a top quality kit that has no parallel. The EVO1502 one-piece sealed housing utilizes our patent pending Twist-Lock technology to securely fasten our SuperNano-Web Dry air filter in place. The housing also has a molded scoop to retain the factory inlet. This inlet helps direct cool, dense air into the intake system for maximum power! Injen has put it all on the table to give you the greatest intake system possible!, , Roto-molded Housing; The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place. The Twist-Lock system eliminates the use of unnecessary parts and gives you one of the simplest installations available. The EVO1502 housing also includes our Injen Clear-View badge for a cleaner, more aggressive under hood appearance. Roto-molded Intake Tube; The EVO1502 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights. , ,
Evolution Series Air Induction System; Incl. Durable Roto-Molded Polyethylene Tube And Housing/Injen Inspection Badge/SuperNano-Web Dry Filter; Gains +13 HP/TQ Gains +18 ft./lbs.;- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances underHood appearances.
- Twist-Lock Technology to securely integrate the air filter to the housing
- Aggressive underHood appearance while maintaining an OE fit
- Aggressive Under Hood Appearance While Maintaining OE Fit
- Dyno Proven gains of up to 13 hp and 18 lb-ft. of torque
- Injen Clear-View badge for simple air filter inspection
- Stainless steel band clamps with inner protective liner
- Fully serviceable Injen SuperNano-Web dry air filter
- Durable Roto-Molded Polyethylene tube and housing
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1115-BB
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Made in Pomona, California USA
-
The Injen Technology engineers are experts when it comes to performance, PERIOD. From Cars to Trucks to Powersports, Injen has a variety of exhaust systems to choose from. All of Injen Technology Performance exhaust systems are constructed from mandrel bent stainless steel tubing Mandrel-bending ensures the tubing maintains its shapes and size throughout the entire length, providing smooth, unrestricted airflow. From the Investment cast flanges to the custom hangers, all Injen exhaust systems are 100% TIG welded and handcrafted in the USA and include all tubing, mufflers, and hardware necessary for a hassle free installation. Each system is uniquely designed to offer an aggressive sound that brings out some massive power. Like all other Injen products, the Injen exhaust systems are proudly built in Pomona, CA.
Cat-Back Exhaust System; 76mm; w/Dual 4.5 in. Titanium Tips; Stainless Steel Investment Flanges;- If you’re looking to improve sound, power, and looks then this is the system for you!
- Hand Crafted and TIG Welded to Perfection for Strength and Durability
- Features Injen’s integrated Y-Pipe resonator for crisp, clean sound
- Stainless Steel Investment Cast Flanges For a Fast and Easy Install
- Full 76MM piping made from premium 304 SS Mandrel-Bent Tubing
- Beautiful dual 4.5″burnt titanium, center exit exhaust tips
- Premium Stainless Steel Hardware and Hangers
- Manufactured in Pomona, California USA
- Increased Horsepower and Torque
- No Cutting or Welding Required
- Stainless Steel Investment
-
Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen’s Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
SES Intercooler Pipes, Part No. SES1582ICPWR, 2017-2021 Honda Civic Type R L4-2.0L Turbo.
No intercooler included. Optional front mount intercooler available part # FM1582i- This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
- Precision CNC machined, and TIG-Welded sensor flanges included
- Includes all necessary hardware for a hassle-free installation
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Stainless Steel Band Clamp with Inner Protective Liner
- Manufactured from Lightweight 6061-T6 Aluminum Piping
- Increase Throttle Response and Decreases Turbo Lag
- Optional front mount intercooler P/N # FM1582i
- Stepped design utilizing 2.25″and 2.50″piping
- Unique Injen Logo Plate for a Refined Style
- One TIG-Welded 1/8″NPT fitting included
- Mandrel-bent Tubing for Increased Flow
- Uses all factory mounting locations
- Automotive Grade Silicone Couplers
- Hot and cold side piping included
- Uses Factory Mounting Locations
- Made in Pomona, California USA
- No intercooler included.
-
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Short Ram Air Intake System; Incl. Tubing/Filter/Heat Shield/Hardware/Instruction; w/MR Technology; HP Gains +14.2 HP/Torque Gains +12.03 ft. lbs.; Black;
Nissan 2017 Sentra 1.6L 4 cyl. TurboTuned cold air intake with MR Technology; Air Fusion and nano-fiber dry filter- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 14 hp and 12 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- Features Injen’s patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Features Injen’s patented Air Fusion Technology
- Replacement air filter part number X-1056-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 14ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Cold Air Intake Design
-
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Short Ram Air Intake System; Incl. Tubing/Filter/Heat Shield/Hardware/Instruction; w/MR Technology; HP Gains +14.2 HP/Torque Gains +12.03 ft. lbs.; Polished;
Nissan 2017 Sentra 1.6L 4 cyl. TurboTuned cold air intake with MR Technology; Air Fusion and nano-fiber dry filter- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 14 hp and 12 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- Features Injen’s patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Features Injen’s patented Air Fusion Technology
- Replacement air filter part number X-1056-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 12 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Cold Air Intake Design
-
The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Audi A3 and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, the SP3089 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen SP performance intake provides power you can hear and feel! On our dyno, the SP3089 put down an impressive 10 additional horsepower and 11 pound-feet of tire-scorching torque; This intake provides an aggressive and throaty tone that is unmatched in the aftermarket and one that you’ll enjoy every time you smash the accelerator! Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in amazing finishes ? SP3089P (Polished), SP3089WB (Wrinkle Black), and finally SP3089WR (Wrinkle Red). To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Short Ram Air Intake System; Incl. Tubing/SuperNano-Web Dry Filter/Hardware/Instruction; HP Gains +10 HP/Torque Gains +11 ft./lbs.; Polished;
Excludes Quattro- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield w/cover specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 10 hp and 11 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- System is designed to reuse the factory MAF housing
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1078-BB
- Only fits vehicles equipped with MAF Sensor
- Injen Technology Limited Lifetime Warranty
- Aggressive engine tone under full throttle
- Optional hydroshield part number 1120BLK
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Short Ram Air Intake Design
- Fits FWD vehicles only
-
The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Audi A3 and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, the SP3089 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen SP performance intake provides power you can hear and feel! On our dyno, the SP3089 put down an impressive 10 additional horsepower and 11 pound-feet of tire-scorching torque; This intake provides an aggressive and throaty tone that is unmatched in the aftermarket and one that you’ll enjoy every time you smash the accelerator! Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in amazing finishes ? SP3089P (Polished), SP3089WB (Wrinkle Black), and finally SP3089WR (Wrinkle Red). To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Short Ram Air Intake System; Incl. Tubing/SuperNano-Web Dry Filter/Hardware/Instruction; HP Gains +10 HP/Torque Gains +11 ft./lbs.; Wrinkle Black;
Excludes Quattro- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield w/cover specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 10 hp and 11 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- System is designed to reuse the factory MAF housing
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1078-BB
- Only fits vehicles equipped with MAF Sensor
- Injen Technology Limited Lifetime Warranty
- Aggressive engine tone under full throttle
- Optional hydroshield part number 1120BLK
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Short Ram Air Intake Design
- Fits FWD vehicles only
-
The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Audi A3 and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, the SP3089 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen SP performance intake provides power you can hear and feel! On our dyno, the SP3089 put down an impressive 10 additional horsepower and 11 pound-feet of tire-scorching torque; This intake provides an aggressive and throaty tone that is unmatched in the aftermarket and one that you’ll enjoy every time you smash the accelerator! Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in amazing finishes ? SP3089P (Polished), SP3089WB (Wrinkle Black), and finally SP3089WR (Wrinkle Red). To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Short Ram Air Intake System; Incl. Tubing/SuperNano-Web Dry Filter/Hardware/Instruction; HP Gains +10 HP/Torque Gains +11 ft./lbs.; Wrinkle Red;
Excludes Quattro- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield w/cover specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 10 hp and 11 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- System is designed to reuse the factory MAF housing
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1078-BB
- Only fits vehicles equipped with MAF Sensor
- Injen Technology Limited Lifetime Warranty
- Aggressive engine tone under full throttle
- Optional hydroshield part number 1120BLK
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Short Ram Air Intake Design
- Fits FWD vehicles only
-
SuperNano-Web Dry Air Filter: “That’s massive!”is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO1104 cold air intake system. This filter has been uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock technology has allowed our engineers to use the largest filter possible for this application, which increases the available air volume – resulting in added power while keeping the installation process quick and simple. Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit. Hassle-Free Installation: Make it easy! The Injen Evolution Air intakes that use our Twist-Lock System have been strategically designed to use fewer parts to provide the end user with one of the quickest and simplest installations available on the market today. Dyno Proven: Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your BMW. So after hours of designing and dyno testing, Injen is proud to say that the EVO1104 Evolution Air Intake system puts down numbers of up to 7 additional horsepower and 7 Ft.-lbs. of torque.
Evolution Series Air Induction System; Incl. Enclosed Airbox w/Sight Window/Intake Tube/SuperNano-Web Dry Air Filter/Hardware; HP Gains +8 HP/Torque Gains +7 ft./lbs.;- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances underHood appearances.
- Aggressive underHood appearance while maintaining an OE fit
- Aggressive Under Hood Appearance While Maintaining OE Fit
- Stainless steel band clamps with inner protective liner
- Dyno Proven gains of up to 7 hp and 7 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Durable Roto-Molded Polyethylene tube and housing
- Reinforced automotive grade silicone couplers
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Replacement air filter # X-1112-BB
- Made in Pomona, California USA
-
Does your ride need some excitement added to it? Of course it does and why would that ever be a question?! Well, you’re in luck because the engineers at Injen Technology have you covered. Check out this Injen PowerFlow (PF) intake to fulfill all of your horsepower desires. The Injen PF cold air intakes have dyno proven power gains that don’t lie. The 6061-T6 aluminum tubing offers superior airflow and styling, plus it’s available with multiple finish options, allowing you to choice on the finished look inside your engine bay. Injen likes to keep things cool, so the air filter is positioned in the best possible location to keep that unwanted hot air from entering your intake. This helps drop air intake temperatures and feed cool, dense air to that hungry engine. This Injen PF intake kit includes everything that is required for a direct-fit installation. Just like all of Injen’s cold air intake systems, this PF Cold air Intake kit includes the unbeatable Injen limited Lifetime Warranty. Rest assured that all of your Injen parts are performing perfectly for as long as you own them!
Power-Flow Air Intake System; ShortRam; Incl. Tubing/Web Nano-Fibers Dry Filter/Hardware; w/MR Technology/Air Fusion; HPGains +12.0 HP/TorqueGains +10.0 ft. lbs.; Wrinkle Black;- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Provides power gains while maintaining A/F ratios with no additional tuning
- Smooth intake piping eliminates restrictions and improves airflow
- Fully serviceable Injen 8-layer oiled cotton gauze air filter
- Available with multiple finish options (select applications)
- Dyno Proven gains of up to 12 hp and 10 lb-ft. of torque
- Optional hydroshield part number 1037BLK or 1037RED
- Features Injen’s patented MegaRam (MR) Technology
- Features Injen’s patented Air Fusion Technology
- Replacement air filter part number X-1021-BR
- Injen Technology Limited Lifetime Warranty
- Aggressive engine tone under full throttle
- 6061-T6 aluminum intake tubing
- Made in Pomona California, USA
-
Custom Dual inlet/outlet muffler: You won’t find a Y-Pipe here like the competition! The muffler used on this system was designed specifically for the dual side exit Raptor exhaust and features dual 3″inlets/outlets for maximum airflow. The muffler’s internal design and length was changed numerous times until our engineers found the perfect sound without sacrificing power output. It’s this type of dedication to every component that sets Injen apart from the completion. No Exhaust Leaks or fitment issues!, Unlike our competition, Injen never compromises to reduce costs. Where our competition uses band clamps, Injen uses superior quality stainless steel investment cast flanges for the ultimate seals and ensures a hassle free exhaust. No twisting of the exhaust to make sure if aligns correctly ? simply install the system and enjoy!, , Dual Black-Chrome Exhaust Tips: Dual 4″black chrome exhaust tips are the finishing touch on this beautiful exhaust system. The tips bolt-on for easy adjustments and provide a visual punch that will set your Raptor apart for the pack!, , OE Style Fitment: OE-Style exhaust hangers are used throughout that utilize the OE hanger bushing that came with your Raptor. This allows the system to install and flex like the factory system during high-stress situations without any damage. A true hassle-free installation with no cutting required. , , Dyno Proven: Plain and simple, NUMBERS talk! We put in the time to test and prove that we have developed a superior exhaust system for your Ford F-150 Raptor. After hours of designing and dyno testing, Injen is proud to say that the SES9102 Dual Side-Exit exhaust system puts down numbers of up to 12 additional horsepower and 14 lb-ft. of torque. Engineered and manufactured at the Injen Technology headquarters in Pomona, Ca.
Cat-Back Exhaust System; Incl. 304 Stainless Steel Tubing/Embossed Injen Muffler/Dual 4 in. Black Chrome Titanium Tips/Hardware; HP Gains +12 HP/Torque Gains +14.0 ft./lbs.;
Fits Super Crew (4 Door) models only- If you’re looking to improve sound, power, and looks then this is the system for you!
- Features Injen’s dual in/out muffler designed specifically for the 3.5L Raptor
- Unique design and muffler delivers a clean, crisp, distinctively Injen sound
- Hand Crafted and TIG Welded to Perfection for Strength and Durability
- Stainless Steel Investment Cast Flange for a Fast and Easy Install
- Premium Stainless Steel Hardware and Hangers for a simple install
- Full 76MM piping made from premium 304 SS Mandrel-Bent Tubing
- Dyno Proven gains of up to 14 hp and 15 lb-ft. of torque
- Beautiful dual 4.0″black chrome exhaust tips
- Injen Technology Limited Lifetime Warranty
- Designed and Manufactured in Pomona, CA
- No Cutting or Welding Required
-
The Injen Technology engineers are experts when it comes to performance, PERIOD. From Cars to Trucks to Powersports, Injen has a variety of exhaust systems to choose from. All of Injen Technology Performance exhaust systems are constructed from mandrel bent stainless steel tubing Mandrel-bending ensures the tubing maintains its shapes and size throughout the entire length, providing smooth, unrestricted airflow. From the Investment cast flanges to the custom hangers, all Injen exhaust systems are 100% TIG welded and handcrafted in the USA and include all tubing, mufflers, and hardware necessary for a hassle free installation. Each system is uniquely designed to offer an aggressive sound that brings out some massive power. Like all other Injen products, the Injen exhaust systems are proudly built in Pomona, CA.
Cat-Back Exhaust System; Incl. Tubing/Mid Section Pipe w/Resonator/Dual 4 in. Titanium Tips/Hardware; HP Gains +11 HP/Torque Gains +10 ft./lbs.; 304 Stainless Steel; Polished;
Fits Civic Si Sedans Only- If you’re looking to improve sound, power, and looks then this is the system for you!
- Hand Crafted and TIG Welded to Perfection for Strength and Durability
- Stainless Steel Investment Cast Flanges For a Fast and Easy Install
- Full 76MM piping made from premium 304 SS Mandrel-Bent Tubing
- Features Injen’s integrated resonator for crisp, clean sound
- Dyno Proven gains of up to 11 hp and 10 lb?ft of torque
- Center exit design fits with factory rear valance
- Beautiful dual 4.0″burnt titanium exhaust tips
- Premium Stainless Steel Hardware and Hangers
- Manufactured in Pomona, California USA
- Designed And Made In Pomona; CA
- Fits Civic Si Sedan models ONLY
- No Cutting or Welding Required
Showing 37021–37032 of 69403 results