Shop

Snow Performance has combined performance, quality, and ease of installation in this new water-methanol injection kit designed for all Ford 7.3 / 6.0 / 6.4 / 6.7 Powerstroke owners who demand colder EGTs while towing heavy loads. The Diesel Stage 3 Boost Cooler utilizes a 2D mapped controller that commands injection based on boost pressure and EGTs (exhaust gas temperatures) to maintain extremely cold air inlet temperatures, 100-300 EGT decreases, decreased emissions, cleaner engine components, and increased fuel economy all while giving 65+ HP to help pull large hills with easy effort while towing. A must have for the diesel enthusiast that is concerned about the longevity of his truck that sees heavy towing. None invasive, the Diesel Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no drilling/marring of the interior needs to take place or additional gauge pods need to be purchased. Functions as a boost gauge, water-meth controller and EGT monitor all in one! Concerned about warranty? The Snow Performance Stage 3 does not leave a signature on the vehicle leaving your diesel truck with its warranty intact. 7 Gal Tank included for trip ready installation. Recommended for all daily driven Ford 7.3 / 6.0 / 6.4 / 6.7 Powerstrokes that see heavy towing where EGTs become dangerously high. Need a CARB E.O.# for your state? No problem! See part# SNO-50100 for 50-State legal system (C.A.R.B E.0.# D-723)
Diesel Stage 3 Boost Cooler(tm) Water-Methanol Injection Kit Ford 7.3/6.0/6.4/6.7 Powerstroke (Red High Temp Nylon Tubing, Quick-Connect Fittings)
Kit Contents: 300 PSI Extreme Environment (Sealed) UHO Pump, 7 Gal Tank Upgrade, Adjustable Stage 3 Controller/Harness, 20′ Red High Temp Nylon Tubing, EGT Probe Assembly, Boost Line/Required Hardware, Required Quick-Connect Fittings, SP Decal, Dual Nozzle Upgrade, (2) High Flow Solenoid Upgrade, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve

The Snow Performance Stage 3 Boost Cooler brings true 2D mapped water-methanol injection delivery to your EFI (electronic fuel injected) and forced induction (turbocharged/supercharged) vehicle. The Stage 3 creates a 2D injection map based off boost and fuel injector pulse width to deliver a extremely accurate amount of water-methanol when the engine needs it most. Bringing fuel injector pulse width into the mix allows the injection curve to be extended past specific boost points for greater range/control. None invasive, the Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no additional gauge pods need to be purchased and functions as a boost gauge, water-meth controller and fuel system monitor all in one! Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25 points for maximum HP and cooling. Comes with adjustable Stage 3 water-meth controller, 1/4″ High Temp Nylon line and easy to install quick-connect fittings.
Stage 3 Boost Cooler(tm) EFI 2D MAP Progressive Water-Methanol Injection Kit (Red High Temp Nylon, Quick-Connect Fittings)
Kit Contents: 300 PSI UHO Pump, 3Qt Tank, Adjustable Progressive 2D Mapped Stage 3 Controller/Harness, (20′) Red High Temp Nylon Tubing, Boost Line/Required Hardware, Required Quick-Connect Fittings, SP Decal, Self Sealing Level Sensor, LED Alert System, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve

• Adjustable Boost/Fuel Injector Pulse Width Activated Progressive Water-Meth Delivery
• 300 PSI UHO Pump/SP Hypersonic Nozzles
• 100% Methanol Resistant
• High Flow Check Valve
• Low Level Monitoring
• Made In U.S.A.

Unlock 50-70+HP on your boosted vehicle while decreasing your air temps by up to 100 degrees! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 2 Boost Cooler water-methanol injection kit is available for all forced induction applications (supercharged/turbocharged) and uses a progressive controller with built in manifold absolute pressure (MAP) sensor that proportionally injects more or less water-methanol according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. Recommended for all gas forced induction vehicles using a turbo or centrifugal supercharger. Comes with adjustable progressive VC-20 engine mount controller and easy to install quick-connect fittings.
Stage 2 Boost Cooler(tm) Forced Induction Progressive Engine Mount Water-Methanol Injection Kit (Red High Temp Nylon Tubing, Quick-Connect Fittings)
Kit Contents: 300 PSI UHO Pump, 3Qt Tank, Adjustable Progressive VC-20 Controller/Harness, (20′) Red High Temp Nylon Tubing, Boost Line/Required Hardware, Required Quick-Connect Fittings, SP Decal, Self Sealing Level Sensor, LED Alert System, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve

• Adjustable Boost Activated Progressive Water-Meth Delivery
• 300 PSI UHO Pump/SP Hypersonic Nozzles
• 100% Methanol Resistant
• High Flow Check Valve
• Low Level Monitoring
• LED Alert System
• Made In U.S.A.

Race gas quality fuel on pump gas! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 1 Boost Cooler water-methanol injection kit is available for all forced induction applications (supercharged/turbocharged) and uses a adjustable boost switch to inject a fixed amount of water-methanol into the system until boost goes below the switch set point. Proven to deliver 30-70 HP increases to all forced induction applications! This makes it a good choice for low to medium boost setups (1-15 PSI) and vehicles with a positive displacement supercharger looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user-chosen switch, such as a full throttle switch, nitrous switch, etc. Comes with 4AN fittings and stainless steel braided line to mount pump/tank in engine bay of vehicle. For trunk mount options see Part# SNO-40014-BRD, SNO-40012-BRD.
Stage 1 Boost Cooler(tm) Forced Induction Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings)
Kit Contents: 300 PSI UHO Pump, 3Qt Tank, Adjustable Boost Pressure Switch/Relay, 20 AMP Fuse/Fuse Holder, (1) 1′, (1) 2′, (1) 5′ Stainless Steel Braided Line, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Self Sealing Level Sensor, LED Alert System, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve

• Adjustable Boost Activated Water-Meth Engagement
• 300 PSI UHO Pump/SP Hypersonic Nozzles
• 100% Methanol Resistant
• High Flow Check Valve
• Low Level Monitoring
• LED Alert System
• Made In U.S.A.

Decrease EGTs and increase HP in your diesel by 65HP+ in the most cost effective water-methanol injection kit on the market! Utilizing a adjustable boost pressure switch and dual nozzles to deliver precise amounts of water-methanol once 30 boost PSI has been reached (Boost Engagement Adjustable, 30 PSI Boost Hobbs Switch Included). Recommended for all high boost and competition diesels looking to increase HP while decreasing EGTs when on heavy throttle. Comes with easy to mount race ready 3QT tank, high flow check valve, quick-connect fittings, 300 PSI UHO Pump, and LED alert system.
Diesel Stage 1 Boost Cooler(tm) Water-Methanol Injection Kit (Red High Temp Nylon Tubing, Quick-Connect Fittings)
Kit Contents: 300 PSI UHO Pump, 3Qt Tank, Adjustable Boost Pressure Switch/Relay, 20 AMP Fuse, (20′) Red High Temp Nylon Tubing, Boost Line/Required Hardware, Required Quick-Connect Fittings, SP Decal, LED Alert System, Dual Nozzle Upgrade, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve

• Adjustable Boost Activated Water-Meth Engagement
• 300 PSI UHO Pump/SP Hypersonic Nozzles
• 100% Methanol Resistant
• Dual Water-Meth Nozzles
• LED Monitoring system
• High Flow Check Valve
• Made In U.S.A.

Snow Performance has combined performance, quality, and easy installation in this new water-methanol injection system engineered specifically for all forced induction (supercharged/turbocharged) Dodge Challengers/Chargers with the. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all forced induction (supercharged/turbocharged) Dodge Challenger/Chargers with 5.7 / 6.1 / 6.4 engine.
Stage 2 Boost Cooler(tm) Dodge Challenger/Charger Hellcat Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings)

Unlock 50-70+HP on your boosted vehicle while decreasing your air temps by up to 100 degrees! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 2 Boost Cooler water-methanol injection system is available for all forced induction applications (supercharged/turbocharged). The Stage 2 uses the progressive VC-50 controller (52mm Gauge) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The Stage 2 introduces the VC-50 Controller (ISO 9001 Manufactured). The VC-50 offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to your OEM gauges or mix and match up to two colors. Comes with 4AN fittings and stainless steel braided line to mount pump/tank in engine bay of vehicle. For trunk mount options see Part# SNO-40014-BRD, SNO-40012-BRD.
Stage 2 Boost Cooler(tm) Forced Induction Progressive Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings) No Tank – No Tank

Unlock 50-70+HP on your boosted vehicle while decreasing your air temps by up to 100 degrees! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 2 Boost Cooler water-methanol injection system is available for all forced induction applications (supercharged/turbocharged). The Stage 2 uses the progressive VC-50 controller (52mm Gauge) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The Stage 2 introduces the VC-50 Controller (ISO 9001 Manufactured). The VC-50 offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to your OEM gauges or mix and match up to two colors. Comes with 4AN fittings and stainless steel braided line to mount pump/tank in engine bay of vehicle. For trunk mount options see Part# SNO-40014-BRD, SNO-40012-BRD.
Stage 2 Boost Cooler(tm) Forced Induction Progressive Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings)
Kit Contents: 300 PSI UHO Pump, 3Qt Tank, Adjustable Progressive VC-50 Controller/Harness, (1) 1′, (1) 2′, (1) 5′ Stainless Steel Braided Line, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Self Sealing Level Sensor, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve

• Adjustable Boost Activated Progressive Water-Meth Delivery
• 300 PSI UHO Pump/SP Hypersonic Nozzles
• 100% Methanol Resistant
• High Flow Check Valve
• Low Level Monitoring
• Made In U.S.A.

Lower EGTs 100-300 degrees and increase HP by 65+ with a cleaner, cooler running Ford 7.3 / 6.0 / 6.4 / 6.7 Powerstroke! The Snow Performance Diesel Stage 2 Boost Cooler is available for all Ford Powerstroke owners looking to have the benefit of water-methanol injection through out the 6.7Ls boost range. The Stage 2 utilizes a progressive VC-50 controller (52mm gauge) that commands two water-methanol nozzles that proportionally inject more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. 7 Gal Tank included for trip ready installation. Recommended for all daily driven Ford Powerstrokes that see light towing.
Diesel Stage 2 Boost Cooler(tm) Water-Methanol Injection Kit Ford 7.3/6.0/6.4/6.7 Powerstroke (Red High Temp Nylon Tubing, Quick-Connect Fittings)
Kit Contents: 300 PSI Extreme Environment (Sealed) UHO Pump, 7 Gal Tank Upgrade, Adjustable Progressive VC-50 Controller/Harness, 20′ Red High Temp Nylon Tubing, Boost Line/Required Hardware, Required Quick-Connect Fittings, SP Decal, Dual Nozzle Upgrade, High Flow Solenoid Upgrade, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve

• Adjustable Progressive Boost Activated Water-Meth Engagement
• 300 PSI UHO Pump/SP Hypersonic Nozzles
• High Flow Solenoid Upgrade
• 100% Methanol Resistant
• Dual Water-Meth Nozzles
• High Flow Check Valve
• Large 7 Gal Capacity
• Made In U.S.A.

Unlock 50-70+HP on your boosted vehicle while decreasing your air temps by up to 100 degrees! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 2 Boost Cooler water-methanol injection kit is available for all forced induction applications (supercharged/turbocharged) and uses a progressive controller with built in manifold absolute pressure (MAP) sensor that proportionally injects more or less water-methanol according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. Comes with adjustable progressive VC-20 engine mount controller, 4AN fittings, and stainless steel braided line to mount pump/tank in engine bay of vehicle. For trunk mount options see Part# SNO-40014-BRD, SNO-40012-BRD.
Stage 2 Boost Cooler(tm) Forced Induction Progressive Engine Mount Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings)
Kit Contents: 300 PSI UHO Pump, 3Qt Tank, Adjustable Progressive VC-20 Controller/Harness, (1) 1′, (1) 2′, (1) 5′ Stainless Steel Braided Line, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Self Sealing Level Sensor, LED Alert System, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve

• Adjustable Boost Activated Progressive Water-Meth Delivery
• 300 PSI UHO Pump/SP Hypersonic Nozzles
• 100% Methanol Resistant
• High Flow Check Valve
• Low Level Monitoring
• LED Alert System
• Made In U.S.A.

The Snow Performance Stage 3 Boost Cooler brings true 2D mapped water-methanol injection delivery to your DI (direct fuel injected) and forced induction (turbocharged/supercharged) vehicle. The Stage 3 creates a 2D injection map based off boost and fuel pressure sensor input to deliver a extremely accurate amount of water-methanol when the engine needs it most. Bringing fuel pressure into the mix allows the injection curve to be extended past specific boost points for greater range/control. None invasive, the Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no additional gauge pods need to be purchased and functions as a boost gauge, water-meth controller and fuel system monitor all in one! Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25 points for maximum HP and cooling. Comes with adjustable Stage 3 water-meth controller, 4AN fittings, and stainless steel braided line to mount pump/tank in engine bay of vehicle. For trunk mount options see Part# SNO-40014-BRD, SNO-40012-BRD.
Stage 3 Boost Cooler(tm) Direct Injected 2D MAP Progressive Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings)
Kit Contents: 300 PSI UHO Pump, 3Qt Tank, Adjustable Progressive 2D Mapped Stage 3 Controller, (1′), (1) 2′, (1) 5′ Stainless Steel Braided Line, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Self Sealing Level Sensor, LED Alert System, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve

• Adjustable Boost/Fuel Pressure Sensor Voltage Activated Progressive Water-Meth Delivery
• 300 PSI UHO Pump/SP Hypersonic Nozzles
• 100% Methanol Resistant
• High Flow Check Valve
• Low Level Monitoring
• Made In U.S.A.