-
The MagnaFlow® JL Jeep Wrangler Overland Series™ Cat-Back Performance Exhaust System #19592 will inject your Jeep Wrangler JL Unlimited V6 (2018-2026) with MagnaFlow®’s deep signature sound and dyno-proven performance. MagnaFlow® exhaust kit #19592 is weight optimized for improved utility and features a single straight-through muffler with 2.5” mandrel bent main piping that fits closer to the undercarriage of the vehicle compared to the stock configuration. This combined with a no-tip, high clearance driver side rear exit greatly enhances your JL Jeep Wrangler’s ground clearance and departure angles. The exhaust system was designed to be compatible with the most popular bolt-on aftermarket modifications. Each system incorporates MagnaFlow®’s No Drone Technology, which mitigates interior noise by cancelling out the natural droning frequencies produced by your JL Jeep Wrangler at cruising speeds while retaining the character of your engine’s exhaust note. CNC precision robotic manufacturing techniques enable perfect fitment and allow for hassle-free bolt-on installation. MagnaFlow® #19592 is made entirely of durable stainless steel and backed by MagnaFlow®’s limited lifetime construction warranty.
Magnaflow Overland Series Stainless Cat-Back System
The MagnaFlow JL Jeep Wrangler Overland Series Cat-Back Performance Exhaust System #19592 will inject your Jeep Wrangler JL Unlimited V6 (2018-2023) with MagnaFlow’s deep signature sound and dyno-proven performance. MagnaFlow exhaust kit #19592 is weight optimized for improved utility and features a single straight-through muffler with 2.5″ mandrel bent main piping that fits closer to the undercarriage of the vehicle compared to the stock configuration. This combined with a no-tip, high clearance driver side rear exit greatly enhances your JL Jeep Wrangler’s ground clearance and departure angles. The exhaust system was designed to be compatible with the most popular bolt-on aftermarket modifications. Each system incorporates MagnaFlow’s No Drone Technology, which mitigates interior noise by cancelling out the natural droning frequencies produced by your JL Jeep Wrangler at cruising speeds while retaining the character of your engine’s exhaust note. CNC precision robotic manufacturing techniques enable perfect fitment and allow for hassle-free bolt-on installation. MagnaFlow #19592 is made entirely of durable stainless steel and backed by MagnaFlow’s limited lifetime construction warranty.- No-Drone-Technology Allows For A Quiet Cabin
- Dyno Proven Performance
- High Clearance Exit
-
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280152. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 280152 includes (8) Bolts, (7) Washers, (7) Nuts and interchanges with OE parts 18150-6B2-L00, 18180-5BF-A00. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Magnaflow OEM Grade Direct-Fit Catalytic Converter
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280152. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 2017-2020 Honda Civic, 2018-2020 Honda Accord, and more, this direct-fit catalytic converter also interchanges with OE parts 18150-6B2-L00 and 18180-5BF-A00. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
- Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
- Your Trusted Source For EPA-Compliant Catalytic Converters
- Mandrel Bent Tubing Retains Oem-Like Design And Geometry
- Durable 308 Stainless Steel Mig Welds
-
MagnaFlow 19-20 Chevrolet Silverado 1500 2.7L OEM Grade EPA Compliant Direct-Fit Catalytic Converter
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280198. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 280198 includes (1) Flat Ring Gasket, (1) Flange Gasket, (2) Nuts, (2) Bolts and interchanges with OE parts 12688901, 12691888, 12693374. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Magnaflow OEM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California, Colorado or New York.- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
-
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280049. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2019-2020 Hyundai Santa Fe and interchanges with OE part 28600-S2320. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Magnaflow OEM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California, Colorado or New York.- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
- Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
- Your Trusted Source For EPA-Compliant Catalytic Converters
- Durable 308 Stainless Steel Mig Welds
-
The MagnaFlow 2019-2025 Chevrolet Blazer Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.6L 2019-2025 Chevrolet Blazer with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Quad Split Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Chevrolet Blazer exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Chevrolet Blazer’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19466 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19466 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.
Magnaflow Street Series Stainless Cat-Back System
The MagnaFlow 2019-2024 Chevrolet Blazer Street Series Cat-Back Performance Exhaust System 19466 brings out the personality of your 3.6L 2019-2024 Chevrolet Blazer with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Quad Split Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Chevrolet Blazer exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Chevrolet Blazer’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19466 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19466 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.- Durable Corrosion-Resistant Stainless Steel Construction
- CNC precision robotic manufacturing techniques
- Dyno Proven Performance
-
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280387. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2019-2021 Nissan Altima and interchanges with OE parts 200A0-6CA0B and 200A0-6CA0A. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Magnaflow OEM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California, Colorado or New York.- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
- Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
- Your Trusted Source For EPA-Compliant Catalytic Converters
- Durable 308 Stainless Steel Mig Welds
-
Magnaflow 19-21 Toyota RAV4 Street Series Cat-Back Performance Exhaust System- Dual Rear Exit- Black
The MagnaFlow Toyota RAV4 Street Series Cat-Back Performance Exhaust System #19500 is designed to inject your 2019-2025 Toyota RAV4 2.5L (non-hybrid) with MagnaFlow’s deep signature exhaust note and dyno-proven performance. Each #19500 exhaust kit features a cat-back layout with 2.5” mandrel bent tubing leading through a straight-through muffler and on to 4” black chrome finished tips in a dual split rear exit configuration. Exhaust system #19500 utilizes a resonator that incorporates MagnaFlow’s No Drone Technology (NDT) to keep low-rpm noises in check while generating moderate exterior exhaust volume and maintaining comfortably mild interior sound levels. This RAV4 performance exhaust system is produced using CNC precision robotic manufacturing and features durable 100% stainless steel construction backed by MagnaFlow’s limited lifetime warranty.
Magnaflow Street Series Black Chrome Cat-Back System
The MagnaFlow Toyota RAV4 Street Series Cat-Back Performance Exhaust System #19500 is designed to inject your 2019-2023 Toyota RAV4 2.5L (non-hybrid) with MagnaFlow’s deep signature exhaust note and dyno-proven performance. Each #19500 exhaust kit features a cat-back layout with 2.5″ mandrel bent tubing leading through a straight-through muffler and on to 4″ black chrome finished tips in a dual split rear exit configuration. Exhaust system #19500 utilizes a resonator that incorporates MagnaFlow’s No Drone Technology (NDT) to keep low-rpm noises in check while generating moderate exterior exhaust volume and maintaining comfortably mild interior sound levels. This RAV4 performance exhaust system is produced using CNC precision robotic manufacturing and features durable 100% stainless steel construction backed by MagnaFlow’s limited lifetime warranty.- Durable Corrosion-Resistant Stainless Steel Construction
- CNC precision robotic manufacturing techniques
- Dyno Proven Performance
-
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280510. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2019-2022 BMW 330i and 2019-2022 BMW 330i xDrive. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Magnaflow OEM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California, Colorado or New York.- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
- Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
- Your Trusted Source For EPA-Compliant Catalytic Converters
- Durable 308 Stainless Steel Mig Welds
-
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280513. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2019-2022 BMW X5, 2019-2022 BMW X7, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Magnaflow OEM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California, Colorado or New York.- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
- Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
- Your Trusted Source For EPA-Compliant Catalytic Converters
- Durable 308 Stainless Steel Mig Welds
-
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280670. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2019-2022 Subaru Ascent, 2020-2023 Subaru Outback, and additional vehicles. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Magnaflow OEM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California, Colorado or New York.- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
- Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
- Your Trusted Source For EPA-Compliant Catalytic Converters
- Durable 308 Stainless Steel Mig Welds
-
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 290110. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2019-2022 Subaru Ascent, 2020-2022 Subaru Outback, and additional vehicles. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Magnaflow OEM Grade Manifold Catalytic Converter
Not legal for sale or installation in California, Colorado or New York.- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
- Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
- Your Trusted Source For EPA-Compliant Catalytic Converters
- Durable 308 stainless steel MIG welds
-
The MagnaFlow® Chevrolet Silverado 1500/GMC Sierra 1500 Overland Series™ Cat-Back Performance Exhaust System #19626 is engineered to enhance the off-road capabilities, performance and sound of your 2019-2024 Chevy Silverado 1500 or GMC Sierra 1500 equipped with the 6.2L engine option. The high clearance design of this exhaust kit increases your rig’s capacity to traverse any sort of terrain, while the incorporation of an NDT (No Drone Technology) resonator helps mitigate the droning frequencies that can otherwise occur at highway cruising speeds. #19626 features 3.5” diameter main piping that passes through an 18” oval bodied straight-through muffler and 14” NDT reflection chamber before terminating in a dual split rear exit with high clearance tailpipes. Exhaust kit #19626’s easy-to-install direct-fit design is engineered to replace all of your truck’s stock exhaust components from near the catalytic converter on back. This Chevrolet Silverado 1500/GMC Sierra 1500 performance exhaust system is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow®’s limited lifetime warranty.
Magnaflow Overland Series Stainless Cat-Back System
The MagnaFlow Chevrolet Silverado 1500/GMC Sierra 1500 Overland Series Cat-Back Performance Exhaust System #19626 is engineered to enhance the off-road capabilities, performance and sound of your 2019-2023 Chevy Silverado 1500 or GMC Sierra 1500 equipped with the 6.2L engine option. The high clearance design of this exhaust kit increases your rig’s capacity to traverse any sort of terrain, while the incorporation of an NDT (No Drone Technology) resonator helps mitigate the droning frequencies that can otherwise occur at highway cruising speeds. #19626 features 3.5″ diameter main piping that passes through an 18″ oval bodied straight-through muffler and 14″ NDT reflection chamber before terminating in a dual split rear exit with high clearance tailpipes. Exhaust kit #19626’s easy-to-install direct-fit design is engineered to replace all of your truck’s stock exhaust components from near the catalytic converter on back. This Chevrolet Silverado 1500/GMC Sierra 1500 performance exhaust system is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime warranty.- No-Drone-Technology Allows For A Quiet Cabin
- Dyno Proven Performance
- High Clearance Exit
Showing 33697–33708 of 49339 results