-
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Short Ram Air Intake System; Incl. Tubing/Filter/Heat Shield/Hardware/Instruction; w/MR Technology And Air Fusion; Gains +8.0 HP/Torque +7.0 ft. lbs.; Wrinkle Red; Special Order;
Ford 2016-2017 Fiesta ST 1.6L turbo 4 cyl.Tuned air intake with MR Technology; Air Fusion; SuperNano Web dry filter and heat shield- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 8 hp and 7 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Provides power gains while maintaining A/F ratios
- Features Injen’s patented Air Fusion Technology
- Replacement air filter part number X-1081-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 7 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Short Ram Air Intake Design
-
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system, something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patent 7,721,669), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket.
Short Ram Air Intake System; Incl. Tubing/Filter/Functional Heat Shield/Hardware/Instruction; w/MR Technology; HP Gains +8.0 HP/Torque Gains +7.0 ft. lbs.; Black;
Mazda 2016-2017 MX-5 2.0L 4 cyl. Tuned air intake system with MR Technology; SuperNano Web dry filter and functional heat shield- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 8 hp and 7 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1035BLK or 1035RED
- Features Injen’s patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Features Injen’s patented Air Fusion Technology
- Replacement air filter part number X-1017-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 7 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona California, USA
- No additional tuning required
- Short Ram Air Intake Design
-
Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system, something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patent 7,721,669), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket.
Short Ram Air Intake System; Incl. Tubing/Filter/Functional Heat Shield/Hardware/Instruction; w/MR Technology; HP Gains +8.0 HP/Torque Gains +7.0 ft. lbs.; Polished;
Mazda 2016-2017 MX-5 2.0L 4 cyl. Tuned air intake system with MR Technology; SuperNano Web dry filter and functional heat shield- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 8 hp and 7 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1035BLK or 1035RED
- Features Injen’s patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Features Injen’s patented Air Fusion Technology
- Replacement air filter part number X-1017-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Increased Torque Up To 7 ft./lbs.
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona California, USA
- No additional tuning required
- Short Ram Air Intake Design
-
Injen is proud to introduce the newest Power Flow cold air intake to our line up. In recent testing PF2059P put out 14 hp and 14 lbs. of torque. This Power Flow intake is constructed out of 6061 Polished Aluminum to provide a clean style. All Injen Power Flow kits are mandrel bent to provide a smooth air track that allows for maximum air speed. Handling the filtration duties on the PF2059 is a large SuperNano-Web Dry air filter providing great flow and unbeatable filtration. The SuperNano-Web Dry air filter does not require any oil and is easy to clean. All Injen cold air intakes come complete with all required hardware to allow the customer to have a hassle-free and easy installation. Performance Air Filter: This intake system utilizes the Injen dry, SuperNano-Web conical high flow air filter that provides unbeatable protection as well as maximum performance. One-Piece Heat Shield: The sturdy 18 Gauge black Powder-Coated Heat Shield Helps to block out engine heat. This heat shield uses factory mounting locations to help provide a fast and simple installation. Mandrel-Bent Tubing: The 6061-T6 Aluminum Intake Tube is Mandrel-Bent to administer a less restrictive intake air path resulting in smoother airflow. Quality Hardware: Stainless Steel Band Clamps with inner protective liner and reinforced automotive grade silicone couplers are used to provide the most secure installation available. Dyno Results: After hours of design and dyno testing This Power Flow Air Intake system was providing good power racking up 14 additional horsepower and 14 lbs. of torque.
Power-Flow Air Intake System; Incl. Tuned Short Ram Tubing/Filter/Hardware/Instruction; w/MR Technology; Polished;
Excludes All XD models
Nissan 2016-2017 Titan 5.6L V8 tuned short ram air intake w/MR Technology and Web nano-fiber dry filter- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Provides power gains while maintaining A/F ratios with no additional tuning
- Smooth intake piping eliminates restrictions and improves airflow
- Available with multiple finish options (select applications)
- Dyno Proven gains of up to 15 hp and 18 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Features Injen’s patented Air Fusion Technology
- Replacement air filter part number X-1046-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Optional hydroshield part number 1053BLK
- MR Technology Patented Tuning Process
- 6061-T6 aluminum intake tubing
- Made in Pomona California, USA
-
Injen is proud to introduce the newest Power Flow cold air intake to our line up. In recent testing PF2059P put out 14 hp and 14 lbs. of torque. This Power Flow intake is constructed out of 6061 Polished Aluminum to provide a clean style. All Injen Power Flow kits are mandrel bent to provide a smooth air track that allows for maximum air speed. Handling the filtration duties on the PF2059 is a large SuperNano-Web Dry air filter providing great flow and unbeatable filtration. The SuperNano-Web Dry air filter does not require any oil and is easy to clean. All Injen cold air intakes come complete with all required hardware to allow the customer to have a hassle-free and easy installation. Performance Air Filter: This intake system utilizes the Injen dry, SuperNano-Web conical high flow air filter that provides unbeatable protection as well as maximum performance. One-Piece Heat Shield: The sturdy 18 Gauge black Powder-Coated Heat Shield Helps to block out engine heat. This heat shield uses factory mounting locations to help provide a fast and simple installation. Mandrel-Bent Tubing: The 6061-T6 Aluminum Intake Tube is Mandrel-Bent to administer a less restrictive intake air path resulting in smoother airflow. Quality Hardware: Stainless Steel Band Clamps with inner protective liner and reinforced automotive grade silicone couplers are used to provide the most secure installation available. Dyno Results: After hours of design and dyno testing This Power Flow Air Intake system was providing good power racking up 14 additional horsepower and 14 lbs. of torque.
Power-Flow Air Intake System; Incl. Tuned Short Ram Tubing/Filter/Hardware/Instruction; w/MR Technology; Wrinkle Black;
Excludes All XD models
Nissan 2016-2017 Titan 5.6L V8 tuned short ram air intake w/MR Technology and Web nano-fiber dry filter- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Provides power gains while maintaining A/F ratios with no additional tuning
- Smooth intake piping eliminates restrictions and improves airflow
- Available with multiple finish options (select applications)
- Dyno Proven gains of up to 15 hp and 18 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Features Injen’s patented Air Fusion Technology
- Replacement air filter part number X-1046-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Optional hydroshield part number 1053BLK
- MR Technology Patented Tuning Process
- 6061-T6 aluminum intake tubing
- Made in Pomona California, USA
-
“Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system – something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patent 7,721,669), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket.
Cold Air Intake System; Incl. Tubing/Filter/Hardware/Instruction; w/MR Technology; HP Gains +11.0 HP/Torque Gains +9.0 ft. lbs.; Black;- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 11 hp and 9 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Features Injen’s patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Features Injen’s patented Air Fusion Technology
- Replacement air filter part number X-1017-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Optional hydroshield part number 1035BLK
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona California, USA
- No additional tuning required
- Cold Air Intake Design
- Increased HP up to 11
-
“Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system – something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patent 7,721,669), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket.
Cold Air Intake System; Incl. Tubing/Filter/Hardware/Instruction; w/MR Technology; HP Gains +11.0 HP/Torque Gains +9.0 ft. lbs.; Polished;- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 11 hp and 9 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Features Injen’s patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Features Injen’s patented Air Fusion Technology
- Replacement air filter part number X-1017-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Optional hydroshield part number 1035BLK
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona California, USA
- No additional tuning required
- Cold Air Intake Design
- Increased HP up to 11
-
Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen’s Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler*. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
Intercooler Pipe Kit; Mandrel Bent Alum Tubing; CNC Machined Billet Flanges; Incl. 1/8 in. Female Bung For Water/Meth Injec Or Datalog Sensors; Use w/OE Intercooler; Polished;
Cadillac 2013-2017 ATS 2.0L Turbo 4 cyl.Intercooler charge pipes. Mandrel bentAluminum tubing with CNC machined billetintercooler flanges for O.E. fitment. Includes one 1/8in. Female NPT bungs for water/meth injection or datalog sensors. Use with OE intercooler.Intercooler not included- Performance Stepped pipe design utilizing 2.50? and 2.75? piping
- Includes All Necessary Hardware For A Hassle-Free Installation
- Precision CNC machined, and TIG-Welded sensor flanges included
- Available in Polished, Wrinkle Black, and Wrinkle Red finishes
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Stainless Steel Band Clamp with Inner Protective Liner
- Manufactured from Lightweight 6061-T6 Aluminum Piping
- Increase Throttle Response and Decreases Turbo Lag
- Unique Injen Logo Plate for a Refined Style
- Injen Technology Limited Lifetime Warranty
- Includes one TIG-Welded 1/8? NPT fitting
- Mandrel-bent Tubing for Increased Flow
- Includes both hot and cold side pipes
- Uses all factory mounting locations
- Automotive Grade Silicone Couplers
- Made in Pomona California, USA
-
Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen’s Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler*. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
Intercooler Pipe Kit; Mandrel Bent Alum Tubing; CNC Machined Billet Flanges; Incl. 1/8 in. Female Bung For Water/Meth Injec Or Datalog Sensors; Use w/OE Intercooler; Wrinkle Blk;
Cadillac 2013-2017 ATS 2.0L Turbo 4 cyl.Intercooler charge pipes. Mandrel bentAluminum tubing with CNC machined billetintercooler flanges for O.E. fitment. Includes one 1/8in. Female NPT bungs for water/meth injection or datalog sensors. Use with OE intercooler.Intercooler not included- Performance Stepped pipe design utilizing 2.50? and 2.75? piping
- Includes All Necessary Hardware For A Hassle-Free Installation
- Precision CNC machined, and TIG-Welded sensor flanges included
- Available in Polished, Wrinkle Black, and Wrinkle Red finishes
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Stainless Steel Band Clamp with Inner Protective Liner
- Manufactured from Lightweight 6061-T6 Aluminum Piping
- Increase Throttle Response and Decreases Turbo Lag
- Unique Injen Logo Plate for a Refined Style
- Injen Technology Limited Lifetime Warranty
- Includes one TIG-Welded 1/8? NPT fitting
- Mandrel-bent Tubing for Increased Flow
- Includes both hot and cold side pipes
- Uses all factory mounting locations
- Automotive Grade Silicone Couplers
- Made in Pomona California, USA
-
Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen’s Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler*. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
Intercooler Pipe Kit; Mandrel Bent Alum Tubing; CNC Machined Billet Flanges; Incl. 1/8 in. Female Bung For Water/Meth Injec Or Datalog Sensors; Use w/OE Intercooler; Wrinkle Red;
Cadillac 2013-2017 ATS 2.0L Turbo 4 cyl.Intercooler charge pipes. Mandrel bentAluminum tubing with CNC machined billetintercooler flanges for O.E. fitment. Includes one 1/8in. Female NPT bungs for water/meth injection or datalog sensors. Use with OE intercooler.Intercooler not included- Performance Stepped pipe design utilizing 2.50? and 2.75? piping
- Includes All Necessary Hardware For A Hassle-Free Installation
- Precision CNC machined, and TIG-Welded sensor flanges included
- Available in Polished, Wrinkle Black, and Wrinkle Red finishes
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Stainless Steel Band Clamp with Inner Protective Liner
- Manufactured from Lightweight 6061-T6 Aluminum Piping
- Increase Throttle Response and Decreases Turbo Lag
- Unique Injen Logo Plate for a Refined Style
- Injen Technology Limited Lifetime Warranty
- Includes one TIG-Welded 1/8? NPT fitting
- Mandrel-bent Tubing for Increased Flow
- Includes both hot and cold side pipes
- Uses all factory mounting locations
- Automotive Grade Silicone Couplers
- Made in Pomona California, USA
-
Introducing the all-new Evolution sealed air intake system Part Number EVO7301 for the 2016-2020 Chevrolet Camaro SS! This intake was designed using the most up-to-date engineering tools and techniques to produce a top quality kit that has no parallel. The EVO7301 cold air intake system is on a whole new level. From the one-piece sealed housing – that utilizes our all new Injen Twist-Lock System (Patent Pending) to securely attach a massive SuperNano-Web Dry air filter in place – all the way down to premium hardware, Injen has put it all on the table to give you, the customer, the best intake available
Evolution Series Air Induction System; Incl. 1-Piece Enclosed Air Box w/Tube/Patented SuperNano-Web Dry Filter; HP Gains +14 HP/Torque +13 lbs./ft.; Black Badge;
Chevrolet 2016-2017 Camaro SS 6.2L V8Durable rotomolded polyethylene one piece enclosed air box with tube; comes with a patented SuperNano-Web dry filter that twist locks into air box for an air tight seal; the housing includes a Black Badge and the biggest SuperNano-Web dry filter- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Durable Roto-Molded XLPE Polyethylene housing and intake tube
- Aggressive underHood appearance while maintaining an OE fit
- Dyno Proven gains of up to 15 hp and 13 lb-ft. of torque
- Injen Clear-View badge for simple air filter inspection
- Stainless steel band clamps with inner protective liner
- Dyno-Proven Max Gains Up To 15 Hp; 13 ft./lbs Torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1093-BB
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Made in Pomona, California USA
-
The Injen Technology engineers are experts when it comes to performance, PERIOD. From Cars to Trucks to Powersports, Injen has a variety of exhaust systems to choose from. All of Injen Technology Performance exhaust systems are constructed from mandrel bent stainless steel tubing Mandrel-bending ensures the tubing maintains its shapes and size throughout the entire length, providing smooth, unrestricted airflow. From the Investment cast flanges to the custom hangers, all Injen exhaust systems are 100% TIG welded and handcrafted in the USA and include all tubing, mufflers, and hardware necessary for a hassle free installation. Each system is uniquely designed to offer an aggressive sound that brings out some massive power. Like all other Injen products, the Injen exhaust systems are proudly built in Pomona, CA.
Cat-Back Exhaust System; 3 in.; Incl. Stainless Steel Tubing/Tuned Y-Pipe Collector/Oval Mufflers/4.5 in. Angle Cut Tip; HP Gains +14.0 HP/Torque Gains +15.0 ft./lbs.; Polished;
Chevrolet 2016-2017 Camaro 2.0L 4 cyl. Turbo-Full 3in. stainless steel cat-back exhaust with stainless steel flanges and tuned Y-pipe collector. System has traditional American race style polished oval mufflers with rolled edges; 4 1/2in. S.S.; rolled 60 degree angled cut tips- Also includes Injen’s fully functional, hand-crafted Y-Pipe for smooth, equal airflow to both mufflers
- Features Injen’s dual oval mufflers to deliver a clean, crisp, distinctively Injen sound
- If you’re looking to improve sound, power, and looks then this is the system for you!
- Hand Crafted and TIG Welded to Perfection for Strength and Durability
- Stainless Steel Investment Cast Flange for a Fast and Easy Install
- Premium Stainless Steel Hardware and Hangers for a simple install
- Full 76MM piping made from premium 304 SS Mandrel-Bent Tubing
- Dyno Proven gains of up to 14 hp and 15 lb-ft. of torque
- Beautiful dual 4.5? polished exhaust tips
- Designed and Manufactured in Pomona, CA
- Designed And Made In Pomona CA
- No Cutting or Welding Required
Showing 33205–33216 of 58994 results