-
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 24mm 2 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.
Whiteline Front Sway Bar 24mm 2 pt adjustable – Fit Hyundai i30N & RHD Veloster N- Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Internal grease reservoirs on bushing provide continual self lubrication for optimum friction management.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Whiteline sway bars are principally designed to reduce body roll or sway while cornering.
- Kit Contains 1 Sway Bar, 2 Bushings, 2 Saddles
-
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.
Whiteline Sway bar – 30mm heavy duty- Durable construction supports long-term driving performance on varied road conditions
- Built to enhance handling performance by distributing load more effectively
- Helps reduce body roll for a more stable and confident cornering experience
-
A must for lowered vehicles, Whiteline roll centre correction kit, is designed to correct roll-centre geometry using specially engineered ball-joints. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression on the outside front tyre during cornering. The result is more even weight distribution and improved tyre contact ultimately improving front end grip, cornering speeds and tyre life when driving the vehicle to its potential.
Whiteline Roll Centre – Correction Kit- Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Engineered to alter vehicles roll centre, increasing tyre grip to the road, optimising the vehicles steering and handling characteristics.
- Engineered to alter/ optimise toe alignment to rectify tyre wear and/or reduce inherent understeer/oversteer behaviour.
- Kit Contains 2 Ball Joints
-
Heavy duty control arms provides on car adjustability of camber alignment. This results in improved traction, increased cornering grip and better tyre life – ultimately improving overall performance.
Whiteline Control Arm Rear Toe Arm- Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Engineered to alter/ optimise alignment to rectify tyre wear and/or reduce inherent understeer/oversteer behaviour.
- Specially bonded design for optimised strength typically required in high load bearing applications
- Kit Contains 2 Arms
-
Heavy duty control arms provides on car adjustability of camber alignment. This results in improved traction, increased cornering grip and better tyre life – ultimately improving overall performance.
Whiteline Control Arm Rear Upper Traction Arm- Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Engineered to alter/ optimise alignment to rectify tyre wear and/or reduce inherent understeer/oversteer behaviour.
- Specially bonded design for optimised strength typically required in high load bearing applications
- Kit Contains 2 Arms
-
Heavy duty control arms provides on car adjustability of camber alignment. This results in improved traction, increased cornering grip and better tyre life – ultimately improving overall performance.
Whiteline Control Arm Rear Trailing Arm- Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Engineered to alter/ optimise alignment to rectify tyre wear and/or reduce inherent understeer/oversteer behaviour.
- Specially bonded design for optimised strength typically required in high load bearing applications
- Kit Contains 2 Arms
-
Heavy duty control arms provides on car adjustability of camber alignment. This results in improved traction, increased cornering grip and better tyre life – ultimately improving overall performance.
Whiteline Control Arm Upper Camber Arm- Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Engineered to alter/ optimise alignment to rectify tyre wear and/or reduce inherent understeer/oversteer behaviour.
- Specially bonded design for optimised strength typically required in high load bearing applications
- Kit Contains 2 Arms
-
Worn control arm bushings have a huge influence on vehicle stability, steering precision and braking efficiency. Replace worn bushings to as new condition utilising Whiteline’s sealed spherical bearing.
Whiteline Control Arm Lower Front – Inner Forward Bearing Kit- Engineered for dependable performance across a wide range of conditions
- Durable materials support long-term use and consistent reliability
- Designed for straightforward installation and dependable fit
- Kit contains 2 Bearings, 4 Tubes
-
Whiteline’s heavy duty adjustable rear lower front control arm kit designed to allow for increased range of toe adjustment. Low compliance bushings are used to minimise NVH and maximise longevity. Left-right-hand thread adjustment turn-buckle allows for easy on-car adjustment.
Whiteline Control arm- Engineered for dependable performance across a wide range of conditions
- Durable materials support long-term use and consistent reliability
- Designed for straightforward installation and dependable fit
-
Whiteline Springs deliver improved vehicle performance whilst maintaining safety and ride quality characteristics. This kit contains 2.4kg/mm (134lb/in) front rated springs that provide a 25mm drop while the 2.0kg/mm (112lb/in) rated rears deliver a desirable 25mm to the vehicle. By lowering the vehicles centre of gravity, the unique and progressive rate coil design not only improve performance but enhance overall appearance. Developed and manufactured in Europe from the highest quality materials, coating and to the finest tolerances guaranteeing exact fitment. Whiteline Springs are engineered for optimal balance with OEM and aftermarket shocks. For total grip activation match with Whiteline Sway Bar and Essentials kit for unrivalled handling and optimal vehicle performance.
Whiteline Lowering Spring Kit – Hyundai/Kia- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- These progressive rate springs are designed to provide improved performance without compromising ride quality characteristics.
- Engineered for superior fit/performance with OEM shocks while produced to the finest tolerances ensuring exact fitment.
- Cold rolled in Europe from the highest quality material.
-
Not many enthusiasts are aware that OE and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.
Whiteline Sway bar – link.- By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
- Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
- Manufactured from high quality alloy and include heavy duty steel ball joint ends ensuring maximum strength and durability.
- Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
- Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
-
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.
Whiteline Suspension Stabilizer Bar Assembly.- Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Take control with multi-point adjustment that allow the driver to fine tune vehicle characteristics to suit their driving preference or conditions.
- Featuring premium anodized alloy materials, providing a long-lasting protective barrier to corrosion and wear but they look great too.
- Larger diameter sway bars offer a higher torsional resistance which in turn increases overall roll stiffness.
- DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
- Forged ends ensure maximum strength and performance of the sway bar at the sway bar link mounting point.
- The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.
- Internal grease reservoirs provide continual self-lubrication for optimum friction management.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Whiteline sway bars are principally designed to reduce body roll or sway while cornering.
Showing 32701–32712 of 33467 results