-
The basic requirements for a properly running engine are fuel, air, compression, and spark. Before increasing the power of your 4-Cylinder or V6, it is wise to ensure all maintenance is up to date and these processes are performing as intended. Weak spark from your ignition system can result in misfiring under high load driving and spark blow-out, which hinders performance. — Mishimoto is proud to launch our new lineup of ignition coils, aimed at providing high-quality replacements that can bring your vehicle up to Stage 0 before moving on to horsepower adding modifications. Our ignition coils are designed and tested to meet or exceed OEM Jeep performance standards and are available as a single coil or in a set of six. Once installed with a set of new spark plugs, one can expect a refreshed ignition system with improved engine startup, a smoother idle, and restored performance from your Wrangler. The primary frame of our coils is constructed from extremely robust phenolic resin, ensuring optimal longevity in high temperature environments. The precision lower boot provides a barrier against moisture entry into the plug well, eliminating chances for spark plug contamination. In addition, our coils are pre-lubricated with dielectric grease to prevent corrosion and ensure an optimal connection between the spark plug and coil. — Mishimoto ignition coils are an ideal replacement for worn or defective factory coils. As with all our products, these ignition coils include our signature Mishimoto Lifetime Warranty.
High-performance ignition coil designed to deliver consistent voltage for efficient combustion and reliable starts. Durable construction improves fuel efficiency, throttle response, and overall engine performance.- Designed and tested to meet or exceed OEM Jeep performance specifications
- High-quality replacement coils available in full sets or single units
- Improves engine startup, idle, and restores performance
-
The cooling system in your 2012-2018 Jeep Wrangler is one of the most crucial systems in the entire vehicle. If just one component in the cooling system fails or becomes clogged, it can be catastrophic. A clogged heater core is inconvenient on a chilly night’s drive, but a clogged radiator can leave you out in the cold with a blown engine. Unfortunately for many JK Wrangler owners, repeated clogging and replacement of cooling system components is an all too familiar scenario. Normal engine wear and servicing can introduce damaging solids into the cooling system, wreaking havoc as they go. 2012-2018 JKs are particularly susceptible, however, thanks to excess casting sand left in the cylinder heads from the factory. But Mishimoto is here to help clean up your JK?s cooling system. Our 2012-2018 Jeep Wrangler JK Coolant Filter Kit will help keep anything that?s not liquid coolant from circulating around your engine and cooling components. This direct-fit kit installs in under an hour and the included Wix? filter traps particles as small as 27 microns. Our silicone hoses are a direct fit and the included ball valves make for a durable and long-lasting system. The 4mm-thick steel bracket can stand up to anything the street or trail can throw at it. Like all Mishimoto products, the Mishimoto 2012-2018 Jeep Wrangler JK Coolant Filtration Kit is backed by our Lifetime Warranty.
High-performance component designed to enhance thermal efficiency, durability, and reliability under demanding conditions. Engineered to support optimal temperature control and system performance across applications.- Helps prevent clogging and extends the life of your Jeep’s radiator, heater core, and other cooling system components
- Direct-fit for 2012-2018 Jeep Wrangler JK 3.6L
- Filters solids from your Jeep’s cooling system
-
Keep temperatures under control in your Jeep with the Mishimoto Jeep Wrangler JK 3.6L Thermostat with Housing. A faulty thermostat can result in engine overheating and potential internal damage. Protect your ride by upgrading to the Mishimoto low-temperature thermostat, featuring an upgraded aluminum housing and galvanized steel bleeder screw for enhanced durability. This thermostat opens at a lower temperature (180 F) compared to the stock unit (203 F), which allows coolant to flow through the system earlier. By doing so, this thermostat will reduce and maintain lower engine coolant temperatures, making it ideal for use in warm climates or under extreme driving/towing conditions. All our thermostats are constructed using high-quality wax for reliable, repeatable operation. As with all our products, this thermostat includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
Engine coolant thermostat designed to regulate coolant flow and maintain optimal operating temperature. Ensures efficient warm-up, prevents overheating, and supports reliable performance with a precise fit.- Allows coolant to flow through the system earlier (Mishimoto thermostat activates at 180 F vs. factory 203 F)
- Ideal for vehicles in warm climates or under extreme towing/driving conditions
- Reduces and maintains lower engine coolant temperatures
-
2018 Jeep Wrangler 3.6L V6 Baffled Oil Catch Can Kit. Using our standard 2 oz. can, this kit will reduce the amount of harmful blow-by oil that coats your intake tracts and cakes your valves with carbon deposits. Internal air diverters slow incoming air for more effective air/oil separation as a 50-micron bronze filter helps filter that air and an internal aluminum baffle prevents any caught content from being recirculated back into the system. With the off-roader in mind, our one-piece, 2.5mm thick steel bracket was specially engineered to wIt’stand a heavy amount of movement and abuse. The mounting location is secure on the chassis, so you won’t have to be concerned about your bracket sustaining damage due to chassis movement. Each kit includes black rubber hoses, a black powder-coated bracket, and is a direct fit for your 2012-2018 3.6L Wrangler. Installation only takes about 1 hour from start to finish, and you can feel confident once It’s installed knowing It’s backed by our Mishimoto Lifetime Warranty!
Engine oil catch can kit designed to capture oil vapors and prevent buildup in the intake system. Helps maintain efficiency, reduce carbon deposits, and improve performance with durable components and easy installation.- Internal air diverter increases air turbulence to improve oil separation
- Helps maintain proper octane levels to reduce potential detonation
- High-quality O-ring ensures a tight seal
-
The transmission in your 2012-2018 Jeep Wrangler JK is the heart of its drivetrain. Whether you’re hauling groceries or hitting the trail, it’s vital to keep it performing at its best, and keeping the transmission fluid cool is crucial to that goal.In an attempt to balance driveability and the health of your transmission, Jeep fitted a thermostatic bypass valve to the lines that feed the transmission cooler. This valve ensures fluid doesn’t flow through the cooler before the transmission reaches operating temperature, preventing overcooling in cold environments. However, when the thermostat in this valve fails, it’s almost a guarantee your transmission will overheat. Moreover, those who live in hot climates will likely never have to worry about overcooling, rendering the valve a useless flow restriction.That’s why Mishimoto has developed a performance thermostatic bypass valve for the 2012-2018 Jeep Wrangler JK. Our performance thermostatic bypass valve features a fully-serviceable and removable thermostat. For those who live in hot climates, the thermostat can be replaced with the included bypass to allow full flow to the transmission cooler at all times. Speaking of flow, the Mishimoto performance thermostatic bypass provides increased flow over the stock valve to ensure your transmission cooler operates at peak efficiency, even with the thermostat installed. The included thermostat opens at the stock temperature of 160F (71C), but the valve can be customized to suit your needs with any available Mishimoto thermostat.The Mishimoto performance thermostatic bypass valve is a direct-fit and is made from durable aircraft-grade aluminum that’s anodized to withstand even the harshest environments. Like all of our Jeep products, our performance thermostatic bypass valve is backed by our Mishimoto Lifetime Warranty.
Automatic transmission oil cooler designed to regulate fluid temperature and prevent overheating. Enhances transmission longevity, maintains performance, and features durable construction with a precise fit.- Durable CNC-machined billet aluminum design
- Direct-fit for 2012-2018 Jeep Wrangler JK
- Installs in less than 1 hour
-
The BMW M5 power and handling statistics are completely mind-blowing for a car tipping the scales at well over two tons. The S63 twin-turbo V8 is underrated from the factory and responds well to tuning and bolt on modifications. Calling it the ultimate super sedan would not do this car justice, it’s just that good. But every amazing automobile must have an Achilles’ heel, right? Some investigation into this model told us that enthusiasts were seeing elevated oil temperatures during track driving conditions. Our team set out to create a replacement, high-performance oil cooler that could handle the rigors of extreme driving conditions and the abuse of daily commuting. The Mishimoto S63 M5/M6 oil cooler features extremely precise CNC-machined billet-aluminum end tanks which are professionally TIG-welded to our robust bar-and-plate core. Our strategically designed 55mm-thick core provides a massive 24% increase in core volume, and a 40% increase in external fin surface area. This added surface area promotes greater heat transfer, which directly impacts internal fluid temperatures. Our performance oil cooler is a complete bolt-on solution that includes everything needed for an easy installation such as hardware and replacement O-rings for the oil lines. Our heat exchanger is finished in a durable silver powder coat, providing both corrosion resistance and improved aesthetics. Whether your M5 sees frequent track time or just the occasional back-road jaunt, upgrading the oil cooler is a great way to extend the life of your S63 and ensure maximum engine output when you need it most. As with all our BMW products, this oil cooler includes our signature Mishimoto Lifetime Warranty.
High-performance engine oil cooler designed to regulate oil temperature and protect critical engine components. Efficient heat dissipation improves durability, maintains lubrication, and ensures reliable performance.- Robust bar-and-plate core resists damage from road debris and provides optimal cooling efficiency
- CNC-machined billet-aluminum end tanks provide improved durability over stock stamped tanks
- 24-percent increase in core volume over stock for improved cooling capacity
-
“Turbocharged, high stress 4 cylinder engines like the 2.0L EcoBoost engine in the Focus ST can overheat their oil very quickly within a few laps on the track or aggressive street driving. Even with the stock liquid-liquid head exchanger, the engine can still run very hot and run the risk of overheating the engine’s coolant as well. Aggressive tunes and some track miles can significantly overheat your oil wear down your engine. Leave it to Mishimoto to come up with an oil cooling solution to your Focus ST! The Mishimoto engineers started with a large 19-row oil cooler and mounted it in the front of the vehicle where it receives the most airflow. The oil cooler was mounted on the passenger side as to not interfere with some aftermarket air intake systems. Application specific braided stainless steel lines transfer the oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of over 30 F (16.7 C) using our non-thermostatic sandwich plate. Proving that this oil cooler kit can withstand the stresses of the most extreme applications. This oil cooler kit is available with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty.”
High-performance engine oil cooler designed to regulate oil temperature and protect critical engine components. Efficient heat dissipation improves durability, maintains lubrication, and ensures reliable performance.
2013-2015 Ford Focus ST 2.0 Liter MMT6- Direct-fit for the 2013-2018 Ford Focus ST
- Reduces oil temperatures by 30 F (16.7 C)
- Minimal pressure drop
-
The legendary reliability and power of the 6.7L Cummins equipped Dodge Ram has solidified it as one of the most popular trucks in the world for getting work done. But every legend has its weakness, and for the Dodge Ram, the stock radiator is one of them.The plastic end-tanks of the stock Ram radiator are prone to cracking and leaks over time. Add the increased stress and heat created by power-adding modifications and you have a recipe for disaster. But that’s where Mishimoto can help.Our new 2013-2018 Ram 2500 / 3500 radiator is the ideal upgrade for any workhorse Cummins powered Ram. With a fully-aluminum, TIG-welded construction, this radiator is built as tough as your truck. A 63-percent increase in coolant capacity, and 41-percent larger surface area mean you can pile on the power and never worry about the heat.As with all of our products, this radiator is backed up by Mishimoto’s Lifetime Warranty. Doesn’t your Ram deserve a radiator worthy of legend?
Aluminum radiator engineered for efficient heat dissipation and optimal engine cooling. Precision-fit design ensures easy installation, corrosion resistance, and reliable performance across varied driving conditions.- Increases coolant capacity by 63-percent and surface area by 41-percent to maximize cooling
- Features a 2-in thick, three-row core for efficient cooling under high loads
- Durable fully aluminum construction with TIG-welded end tanks and fittings
-
Mishimoto proudly announces the all-new direct-fit oil kit specifically designed for the Subaru BRZ / Scion FR-S.This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling, which is perfect for your street or track BRZ/FR-S.Properly regulated oil temperatures will result in improved durability and longevity for your stock or modified 2.0L.This kit features all components for seamless bolt-on fitment.This direct-fit oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains.The Mishimoto BRZ / FR-S Oil Cooler Kit is offered with both black and silver coolers and includes our signature lifetime warranty.
High-performance engine oil cooler designed to regulate oil temperature and protect critical engine components. Efficient heat dissipation improves durability, maintains lubrication, and ensures reliable performance.
2013 Scion FR-S 2.0 Liter TL70, 2013 Scion FR-S 2.0 Liter TX6A, 2013 Subaru BRZ 2.0 Liter TL70, 2013 Subaru BRZ 2.0 Liter TX6A- Premade braided stainless steel oil lines with durable -AN fittings
- Billet aluminum oil sandwich plate in standard or thermostatic form
- Application-specific mounting brackets
-
Mishimoto proudly announces the all-new direct-fit oil kit specifically designed for the Subaru BRZ / Scion FR-S.This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling, which is perfect for your street or track BRZ/FR-S.Properly regulated oil temperatures will result in improved durability and longevity for your stock or modified 2.0L.This kit features all components for seamless bolt-on fitment.This direct-fit oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains.The Mishimoto BRZ / FR-S Oil Cooler Kit is offered with both black and silver coolers and includes our signature lifetime warranty.
High-performance engine oil cooler designed to regulate oil temperature and protect critical engine components. Efficient heat dissipation improves durability, maintains lubrication, and ensures reliable performance.
2013 Scion FR-S 2.0 Liter TL70, 2013 Scion FR-S 2.0 Liter TX6A, 2013 Subaru BRZ 2.0 Liter TL70, 2013 Subaru BRZ 2.0 Liter TX6A- Premade braided stainless steel oil lines with durable -AN fittings
- Billet aluminum oil sandwich plate in standard or thermostatic form
- Application-specific mounting brackets
-
Do you find yourself lying awake at night, horrified by visions of your swollen, plastic blob of an overflow tank? Well we’re here to help you rest easy with the Mishimoto 2013-2021 BRZ / FR-S / GT86 coolant overflow tank. Stock plastic tanks are prone to failure due to repeated hot and cold cycles, and they create a horrible eyesore as they lurk in your engine bay. Mishimoto’s 2013-2021 BRZ / FR-S / GT86 coolant overflow tank is constructed from durable, TIG-welded aluminum for optimal aesthetics and longevity. Included with this 2013-2021 BRZ / FR-S / GT86 coolant overflow tank is a sight glass for easy checking of coolant levels. With the choice of two finishes, polished or anodized black, this tank will have no problem matching the style of your engine bay. This 2013-2021 BRZ / FR-S / GT86 coolant overflow tank fits perfectly with the stock or Mishimoto 2013-2021 BRZ / FR-S / GT86 radiators. As with all Mishimoto parts, this overflow tank includes the Mishimoto Lifetime Warranty.
Engine coolant reservoir designed to store and regulate excess coolant for proper system operation. Durable construction resists heat and pressure, helping prevent leaks and maintain optimal temperature.
2013-2016 Scion FR-S Base 2.0 Liter TL70, 2013-2016 Scion FR-S Base 2.0 Liter TX6A, 2013-2017 Subaru BRZ Limited 2.0 Liter TL70, 2013-2017 Subaru BRZ Limited 2.0 Liter TX6A, 2013-2017 Subaru BRZ Premium 2.0 Liter TL70, 2013-2017 Subaru BRZ Premium 2.0 Liter TX6A, 2015 Subaru BRZ Series.Blue 2.0 Liter TL70, 2015 Subaru BRZ Series.Blue 2.0 Liter TX6A, 2016 Subaru BRZ Series.HyperBlue 2.0 Liter TL70- 100-percent aluminum, fully-welded construction for maximum durability during repeated temperature transitions
- Sight tube allows for proper hot and cold coolant levels
- Installs in under 30 minutes
-
The Subaru BRZ/Scion FR-S/Toyota 86 is one of the most fun, stylish, and capable cars to grace the streets in recent years. From car shows to racetracks, the BRZ/FR-S/86 does it all! Whether you’re building your car for show or go, the Mishimoto Racing Tow Hook is a perfect addition to your ride. Available in six colors to match any style, our tow hook adds a flash of color while also being fully functional. Crafted from high-strength 7075 aluminum and 304 stainless-steel, we designed this tow hook to be a bonified race-ready and fully functional piece of race equipment. With a 2-inch inside diameter fold-down ring design and a straight-pull strength rating of 8,000-pounds, it meets or exceeds requirements for racing series’ such as SCCA, NASA, and CCA. We even include tow hook indication arrow stickers! As with all our products, the Mishimoto Racing Tow Hook is backed by our Mishimoto Lifetime Warranty.
High-performance component engineered for durability, efficiency, and reliable operation under demanding conditions. Designed to support optimal system function across a wide range of automotive applications.- Designed to meet or exceed SCCA, NASA, and most racing series regulations
- Fold-down ring with 2-inch/51mm inside-diameter
- 8,000-pound straight-pull strength rating
Showing 29953–29964 of 38471 results