Shop

The NX Dry Direct Port System provide nitrous directly into each cylinder through a set of high flow NX Dry Nozzles. These systems are designed to be used with an engine management system that can add nitrous enrichment through the engines fuel system. Includes jets for 50-300hp per stage as well as a tech card with lbs./hr. flow data for each jet setting. Includes .093 NX Lightning Solenoid, WOT switch, stainless bottle brackets, 4an nitrous feedline, relay, relay harness and all necessary hardware to complete installation. You can get the system with either 1/16 (default) or 1/8NPT nozzles
DRY DIRECT PORT NITROUS SYSTEM. 4 CYLINDER W/10LB BOTTLE

• Jetting And Tech Card w/Lbs./Hr. Flow Data

For applications that add extra fuel through the factory fuel injection system via aftermarket tuning or secondary fuel mapping. This system includes a single dry nozzle (no fuel), a single billet aluminum / carbon fiber lightning series solenoid, 10 lb. bottle with billet lightning 45 bottle valve, stainless bottle brackets, braided stainless lines as well as jetting for 35,50,75,100,125 and 150HP.
DRY EFI SINGLE NOZZLE SYSTEM (35-150HP) LESS BOTTLE

• Single .93 Lightning Solenoid

For applications that add extra fuel through the factory fuel injection system via aftermarket tuning or secondary fuel mapping. This system includes a single dry nozzle (no fuel), a single billet aluminum / carbon fiber lightning series solenoid, 15 lb. bottle with billet lightning 45 bottle valve, stainless bottle brackets, braided stainless lines as well as jetting for 35,50,75,100,125 and 150HP.
DRY EFI SINGLE NOZZLE SYSTEM (35-150HP) LESS BOTTLE

• Single .93 Lightning Solenoid

For applications that add extra fuel through the factory fuel injection system via aftermarket tuning or secondary fuel mapping. This system includes a single dry nozzle (no fuel), a single billet aluminum / carbon fiber lightning series solenoid, 5 lb. bottle with billet lightning 45 bottle valve, stainless bottle brackets, braided stainless lines as well as jetting for 35,50,75,100,125 and 150HP.
DRY EFI SINGLE NOZZLE SYSTEM (35-150HP) LESS BOTTLE

• Single .93 Lightning Solenoid

INCLUDES T FITTING, LINES, MOUNTING BRACKETS, FOR A DUAL VENT
DUAL VENT PURGE WITH SOFTLINE

• Gives You Two Separate Purge Outlets

If you want the best, this is it. The NX Stage 1 Universal EFI nitrous system is the top of the line EFI power booster on the market. From the highest flowing solenoids, to our patented Shark nozzle, this system screams nothing but quality. Includes jetting from 35 to 150HP. This NX EFI Stage One system comes complete with a 10lb bottle, stainless bottle bracket, Lightning solenoids, extra long stainless braided N2O line, a ford schrader valve adapter, 1/4 in. fuel line T and all necessary hardware to complete the installation.
E85 UNIVERSAL SYSTEM FOR EFI (SINGLE NOZZLE APPLICATION) WITH 10LB BOTTLE

• Made In The U.S.A.

The Nitrous Express direct port nitrous plates are designed to fit factory 2018+ 5.0L Intake manifolds or the Boss intake manifolds. The 2018+ manifolds are a direct bolt on replacement for any of your modern 5.0 coyote engines and provide cheap, easy horsepower. This setup is capable of spraying anywhere from 100-300 horsepower. Direct port plates offer a huge benefit compared to a single nozzle or a plate, giving you the best distribution possible, feeding an equal amount of nitrous and fuel to each cylinder. The plates bolt under the intake manifold making installation quick and simple. The plates come in at 5/8 in. thick so there will be no need to run an aftermarket hood. Made entirely of billet aluminum, anodized in black and as always proudly made in the USA. This system includes a TPS Auto learn switch so the nitrous only activates at wide open throttle and automatically turns off when you let your foot off the accelerator.
Coyote Wet Direct Port Plate System(10LB Bottle)

• Nitrous Plate System

Gen-X accessory packs include all the components you need to make your nitrous system dependable and worry free. Gen-X kit includes: fully automatic bottle heater with pressure transducer, 35PSI fuel pressure safety switch, liquid filled N2O pressure gauge, NHRA approved pressure release fitting, NHRA approved blow down tube, all the electrical connectors and wire needed to complete the installation. Includes all of the above plus a purge valve for the NX Lightning Series or NX Ice-Man solenoids.
GEN X 2 ACCESSORY PACKAGE; EFI

• EFI Fuel Pressure Safety Switch

The Gen-X2 package includes the best accessories for your EFI nitrous system all put into one package. No need to mix and match parts, get everything you need with just the Gen-X2. We include: NHRA legal safety blow off fitting, Blow down tube, Fuel pressure safety switch. The NX automatic pressure controlled bottle heater will keep your bottle pressure where you need it for bumper dragging launches and killer top end performance. We include a NX nitrous pressure gauge which features a color coded bezel allowing you to quickly verify if your bottle is in the optimum pressure zone. The Gen-X package includes relays, switches, wiring and all needed hardware to make the install easy and pain free. For nitrous systems with integrated solenoids (like Coyote Plates and Ford 3-Valve plate systems). Due to the adjustability of the pressure switch contained in this kit, it is compatible with all nitrous kits on the market. Easy to use set-screw for making pressure adjustments. Can be adjusted from 900 P.S.I. to 1200 P.S.I. Switch has a 50 P.S.I. working window for consistent bottle pressure. Bottle Heating Element Specs: 240 Watts @ 12V, 312 Watts @ 13.8V, 425 Watts @ 16V. Pressure Switch Specs: 1/8 NPT, Pre-Set at 1050 P.S.I. The Gen-X package includes the following part numbers: #15940 Bottle Heater, #15508 Bottle Gauge, #11720 Fuel pressure Safety Switch, #11709 NHRA Blow Down Tube Fitting, #11708 Blow Down Tube, #15603 Nitrous Purge Kit,
GEN X 2 ACCESSORY PACKAGE FOR INTEGRATED SOLENOIDS; EFI

• EFI Fuel Pressure Safety Switch

The Nitrous Express LS 102mm Plate System features a billet plate that fits all FAST 102 intakes. This 102mm plate bolts between the throttle body and intake making installation quick, easy and attractive. The system comes as a single stage system and includes jetting for 50, 100, 150, 200, 250, 300, 350 and 400 horsepower. The plate is pre-machined with a second set of nitrous and fuel passages so you can easily upgrade to a dual stage system by adding part # NX933D. This system includes ProPower Lightning series solenoids, 6AN feedline, braided stainless solenoid to plate lines, stainless bottle brackets, master arming switch, WOT switch as well as every nut, bolt and electrical connector needed to complete the installation. This system includes the latest technology and the best components available. NX Lightning solenoids feature an improved flow path that eliminates sharp turns and expansion areas in the nitrous flow path. This keeps the nitrous in dense liquid form which makes more power utilizing less nitrous. Lightning nitrous solenoids feature an integrated purge port which allows you to connect a purge valve directly to the body of the nitrous solenoid for clean looks and less plumbing. Lightning Series solenoids feature CNC aluminum bodies topped with Carbon Fiber cans for the ultimate in weight savings.
LS 102mm PLATE SYSTEM (50-400HP) W/10LB BOTTLE

• Incl. All Hardware To Complete The Installation