-
Unlock more power, sound, and style from your 2024+ Toyota Tacoma with the Mishimoto Performance Air Intake. Designed for drivers who want their truck to perform and sound better without compromising reliability, this intake delivers proven performance gains and an aggressive tone that transforms your driving experience. — Dyno testing shows gains of up to 11.6 horsepower and 10.6 ft-lbs of torque, while airflow is improved by 27.7% compared to stock when the plug is removed. The carefully engineered rotomolded airbox keeps intake air temperatures close to stock, ensuring consistent performance even in demanding conditions. Under acceleration, you’ll notice a deeper and more refined intake tone that adds excitement to every drive. — Installation is simple and DIY friendly, making it an ideal weekend upgrade. With a clear written guide and video instructions, most owners can complete the install in under 30 minutes using only basic hand tools. The kit includes everything needed for a secure fit, including a specially designed flexible grommet that allows the system to maintain a proper seal during off-road chassis flex. — Built for rugged reliability, this intake is ready for any environment. The OEM-style MAF housing maintains correct air-fuel ratios to prevent check engine lights, and the high-flow oiled or dry filter options protect your engine from dust and debris on the trail. Safe to run on a stock tune, this system not only enhances sound and performance but also improves the look of your engine bay with a clean, high-quality finish. — Like all Mishimoto products, this Performance Air Intake is backed by the Mishimoto Lifetime Warranty for worry-free performance on and off the road.
Performance cold air intake kit engineered to increase airflow for improved horsepower and throttle response. Includes high-quality components for enhanced filtration, efficient airflow, and a precise fit.- 27.7% less restrictive than stock with the plug removed for stronger airflow and throttle response
- Enhanced intake tone delivers a deeper, more aggressive sound under acceleration
- Dyno-proven gains of up to 11.6 horsepower and 10.6 ft-lbs of torque
-
Unlock more power, sound, and style from your 2024+ Toyota Tacoma with the Mishimoto Performance Air Intake. Designed for drivers who want their truck to perform and sound better without compromising reliability, this intake delivers proven performance gains and an aggressive tone that transforms your driving experience. — Dyno testing shows gains of up to 11.6 horsepower and 10.6 ft-lbs of torque, while airflow is improved by 27.7% compared to stock when the plug is removed. The carefully engineered rotomolded airbox keeps intake air temperatures close to stock, ensuring consistent performance even in demanding conditions. Under acceleration, you’ll notice a deeper and more refined intake tone that adds excitement to every drive. — Installation is simple and DIY friendly, making it an ideal weekend upgrade. With a clear written guide and video instructions, most owners can complete the install in under 30 minutes using only basic hand tools. The kit includes everything needed for a secure fit, including a specially designed flexible grommet that allows the system to maintain a proper seal during off-road chassis flex. — Built for rugged reliability, this intake is ready for any environment. The OEM-style MAF housing maintains correct air-fuel ratios to prevent check engine lights, and the high-flow oiled or dry filter options protect your engine from dust and debris on the trail. Safe to run on a stock tune, this system not only enhances sound and performance but also improves the look of your engine bay with a clean, high-quality finish. — Like all Mishimoto products, this Performance Air Intake is backed by the Mishimoto Lifetime Warranty for worry-free performance on and off the road.
Performance cold air intake kit engineered to increase airflow for improved horsepower and throttle response. Includes high-quality components for enhanced filtration, efficient airflow, and a precise fit.- 27.7% less restrictive than stock with the plug removed for stronger airflow and throttle response
- Enhanced intake tone delivers a deeper, more aggressive sound under acceleration
- Dyno-proven gains of up to 11.6 horsepower and 10.6 ft-lbs of torque
-
Keep your 2024+ Toyota Tacoma cool and dependable on every drive with a radiator built for strength and endurance. The Mishimoto Performance Aluminum Radiator replaces the stock plastic unit with a fully TIG-welded aluminum design that eliminates weak points and provides reliable performance under tough conditions. A uniquely engineered mounting bracket system, proven through internal vibration testing, delivers exceptional resistance to chassis flex and off-road abuse. — Internal strutted tubes strengthen the core to prevent fatigue over time while a 46% increase in core volume and 23% greater fluid capacity improve heat dissipation and overall cooling efficiency. The built-in 7-row stacked plate transmission cooler outperforms the stock tube-style design, providing superior control of transmission temperatures when towing, off-roading, or running heavier aftermarket parts. — Every detail is crafted for long-term reliability. The increased coolant capacity improves thermal stability, while the magnetic drain plug captures debris to help protect the cooling system. Whether you’re heading into the mountains or navigating daily traffic, this radiator ensures consistent performance and lasting durability, all backed by the Mishimoto Lifetime Warranty.
Aluminum radiator engineered for efficient heat dissipation and optimal engine cooling. Precision-fit design ensures easy installation, corrosion resistance, and reliable performance across varied driving conditions.- All-aluminum construction with TIG-welded end tanks for maximum strength and leak-free reliability
- 46% increase in core volume and 23% greater fluid capacity for superior heat management
- Upgraded mounting bracket system tested for resistance to vibration
-
Protect your 2024+ Toyota Tacoma from cooling failures with our Silicone Coolant Hose Kit. Factory rubber hoses and plastic T-fittings are weak points waiting to fail. This direct-fit replacement eliminates those vulnerabilities with a one-piece silicone design that won’t crack, split, or leak under pressure. The kit includes both upper and lower radiator hoses for full system coverage. — Each hose is made from high-grade, 4-ply silicone reinforced with heat-resistant fibers for unmatched strength and longevity. The integrated T-fittings remove the need for brittle plastic connectors, ensuring your truck stays reliable on trails, while towing, or during daily use. — Premium worm-gear clamps are included for consistent, leak-free sealing and straightforward installation. Backed by the Mishimoto Lifetime Warranty, this upgrade ensures lasting durability and consistent cooling performance mile after mile.
Complete radiator coolant hose kit designed to maintain proper coolant flow and system pressure. Includes durable, heat-resistant hoses for leak prevention, reliable performance, and a precise, easy installation.- Constructed from high-grade 4-ply silicone with heat-resistant embedded fibers
- Offers superior heat and pressure tolerance
- Includes upper and lower radiator hoses
-
Protect your 2024+ Toyota Tacoma from cooling failures with our Silicone Coolant Hose Kit. Factory rubber hoses and plastic T-fittings are weak points waiting to fail. This direct-fit replacement eliminates those vulnerabilities with a one-piece silicone design that won’t crack, split, or leak under pressure. The kit includes both upper and lower radiator hoses for full system coverage. — Each hose is made from high-grade, 4-ply silicone reinforced with heat-resistant fibers for unmatched strength and longevity. The integrated T-fittings remove the need for brittle plastic connectors, ensuring your truck stays reliable on trails, while towing, or during daily use. — Premium worm-gear clamps are included for consistent, leak-free sealing and straightforward installation. Backed by the Mishimoto Lifetime Warranty, this upgrade ensures lasting durability and consistent cooling performance mile after mile.
Complete radiator coolant hose kit designed to maintain proper coolant flow and system pressure. Includes durable, heat-resistant hoses for leak prevention, reliable performance, and a precise, easy installation.- Constructed from high-grade 4-ply silicone with heat-resistant embedded fibers
- Offers superior heat and pressure tolerance
- Includes upper and lower radiator hoses
-
Protect your 2024+ Toyota Tacoma from cooling failures with our Silicone Coolant Hose Kit. Factory rubber hoses and plastic T-fittings are weak points waiting to fail. This direct-fit replacement eliminates those vulnerabilities with a one-piece silicone design that won’t crack, split, or leak under pressure. The kit includes both upper and lower radiator hoses for full system coverage. — Each hose is made from high-grade, 4-ply silicone reinforced with heat-resistant fibers for unmatched strength and longevity. The integrated T-fittings remove the need for brittle plastic connectors, ensuring your truck stays reliable on trails, while towing, or during daily use. — Premium worm-gear clamps are included for consistent, leak-free sealing and straightforward installation. Backed by the Mishimoto Lifetime Warranty, this upgrade ensures lasting durability and consistent cooling performance mile after mile.
Complete radiator coolant hose kit designed to maintain proper coolant flow and system pressure. Includes durable, heat-resistant hoses for leak prevention, reliable performance, and a precise, easy installation.- Constructed from high-grade 4-ply silicone with heat-resistant embedded fibers
- Offers superior heat and pressure tolerance
- Includes upper and lower radiator hoses
-
The classic Ford Bronco is an American icon, a beacon of fun, and a capable off-road vehicle to take you anywhere with the top down and wind blowing. When Ford introduced the new Bronco, it surely kept this spirit alive, but with some much-needed modern-day updates, like getting more than 5 mpg, for example. They achieved this by utilizing the EcoBoost family of engines. As great as the new Bronco is, there is always room for improvement. To give the Bronco some extra pep in its step, we’ve bundled two of our performance intercooler components to make the ultimate air-charge-cooling bundle for your 2.3L EcoBoost! The Mishimoto Performance Intercooler and Intercooler Pipe & Boot Kit bundle improves power and durability compared to the factory intercooler and pipes. The Mishimoto Performance Intercooler features a huge 4.7-inch thick core, CNC-machined 6061 aluminum flanges, and precision tig welded cast aluminum end tanks. Combined, this makes for a robust intercooler that, compared to the plastic end tank factory tube-and-fin intercooler, has far greater durability. More durability is always a good thing, but it’s even better when it’s backed up with performance. The Mishimoto Performance Intercooler and Intercooler Pipe & Boot Kit bundle reduces outlet temperatures by 21.2F and provides an increase in flow of 7% over stock. All of this combined generates gains of 5.68 hp and 5.32 lb-ft of torque. We saw an especially good improvement in our trail simulation heat-soak testing where, after 6 back-to-back dyno runs, we still saw outlet temperatures 20F cooler than stock. What this all means is that in the real world, whether sitting in traffic or out on the trails, you’ll see improvements in performance. All functionality of adaptive cruise control and 360 cameras are retained. As with all of our products, the Mishimoto Performance Intercooler is backed by our signature Mishimoto Lifetime Warranty.
Complete intercooler kit engineered to reduce intake air temperatures for increased power and efficiency. Includes high-quality components for optimal airflow, improved throttle response, and a precise, easy installation.- 21.2 degree reduction in outlet temperature over stock intercooler
- Dyno-proven power gains of 5.68 HP and 5.3 lb.-ft of torque
- 4.7 in thick intercooler design for maximum flow
-
Mishimoto has developed a direct-fit intercooler pipe upgrade kit for the 2021+ Ford Bronco 2.3L EcoBoost that allows you to maximize the performance potential of your 2.3L Bronco. This pipe kit is specifically designed for customers who have previously purchased the Mishimoto performance stock location intercooler and would like to couple it with the Mishimoto pipe kit. This kit includes all the components you will need to upgrade your setup to the full Mishimoto charge air system.—-Our kit replaces the weak and unattractive plastic piping with high-flowing, durable aluminum piping and silicone boots with DuraCore technology. The Mishimoto intercooler pipes flow up to 61-percent better than the stock pipes, allowing your 2.3L EcoBoost to breathe freely and make the most of its turbo. DuraCore boots coupled with constant-tension worm gear clamps provide superior strength and blowout resistance, ensuring boost always makes it to its destination. Available with a sleek polished finish or powder-coated in stealthy wrinkle black, these pipes are a great addition to every 2.3L Bronco from daily driving to the office, to trailblazing through the woods. The upgrade kit also includes CNC-machined aluminum intercooler outlets which provide unrestricted flow from the pipes to the intercooler, maximizing flow and performance.—-As with all Mishimoto products, this 2021+ Ford Bronco 2.3L EcoBoost intercooler pipe kit is backed by our Mishimoto Lifetime Warranty.
Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.- Includes Mishimoto silicone boots with DuraCore technology for superior resistance to heat, pressure, fuel, and oil
- Up to 60-percent less restrictive than stock for better flow and power potential
- Specifically designed for use with the Mishimoto Stock Location Intercooler
-
The classic Ford Bronco is an American icon, a beacon of fun, and a capable off-road vehicle to take you anywhere with the top down and wind blowing. When Ford introduced the new Bronco, it surely kept this spirit alive, but with some much-needed modern-day updates, like getting more than 5 mpg, for example. They achieved this by utilizing the EcoBoost family of engines. As great as the new Bronco is, there is always room for improvement.—-To give the Bronco some extra pep in its step, we’ve bundled two of our performance intercooler components to make the ultimate air-charge-cooling bundle for your 2.7L EcoBoost! The Mishimoto Performance Intercooler and Intercooler Pipe & Boot Kit bundle improves power and durability compared to the factory intercooler and pipes. The Mishimoto Performance Intercooler features a huge 4.7-inch thick core, CNC-machined 6061 aluminum flanges, and precision TIG-welded cast aluminum end tanks. Combined, this makes for a robust intercooler that, compared to the plastic end tank factory tube-and-fin intercooler, has far greater durability. More durability is always a good thing, but it’s even better when it’s backed up with performance.—-The Mishimoto Performance Intercooler and Intercooler Pipe & Boot Kit bundle reduces outlet temperatures by 21.2-degrees and provides an increase in flow of 7-percent over stock. All of this combined generates gains of 13.6 HP and 16.7 lb-ft torque. We saw an especially good improvement in our trail simulation heat-soak testing where, after 6 back-to-back dyno runs, we still saw outlet temperatures 20-degrees cooler than stock.—-What this all means is that in the real world, whether sitting in traffic or out on the trails, you’ll see improvements in performance. All functionality of adaptive cruise control and 360-degree cameras are retained. As with all of our products, the Mishimoto Performance Intercooler is backed by our signature Mishimoto Lifetime Warranty.
Complete intercooler kit engineered to reduce intake air temperatures for increased power and efficiency. Includes high-quality components for optimal airflow, improved throttle response, and a precise, easy installation.- 21.2-degree reduction in outlet temperature over stock intercooler
- Dyno-proven max gains of 13.6 HP and 16.7 lb-ft torque
- 77-percent increase in core volume
-
The classic Ford Bronco is an American icon, a beacon of fun, and a capable off-road vehicle to take you anywhere with the top down and wind blowing. When Ford introduced the new Bronco, it surely kept this spirit alive, but with some much-needed modern-day updates, like getting more than 5 mpg, for example. They achieved this by utilizing the EcoBoost family of engines. As great as the new Bronco is, there is always room for improvement.—-To give the Bronco some extra pep in its step, we’ve bundled two of our performance intercooler components to make the ultimate air-charge-cooling bundle for your 2.7L EcoBoost! The Mishimoto Performance Intercooler and Intercooler Pipe & Boot Kit bundle improves power and durability compared to the factory intercooler and pipes. The Mishimoto Performance Intercooler features a huge 4.7-inch thick core, CNC-machined 6061 aluminum flanges, and precision TIG-welded cast aluminum end tanks. Combined, this makes for a robust intercooler that, compared to the plastic end tank factory tube-and-fin intercooler, has far greater durability. More durability is always a good thing, but it’s even better when it’s backed up with performance.—-The Mishimoto Performance Intercooler and Intercooler Pipe & Boot Kit bundle reduces outlet temperatures by 21.2-degrees and provides an increase in flow of 7-percent over stock. All of this combined generates gains of 13.6 HP and 16.7 lb-ft torque. We saw an especially good improvement in our trail simulation heat-soak testing where, after 6 back-to-back dyno runs, we still saw outlet temperatures 20-degrees cooler than stock.—-What this all means is that in the real world, whether sitting in traffic or out on the trails, you’ll see improvements in performance. All functionality of adaptive cruise control and 360-degree cameras are retained. As with all of our products, the Mishimoto Performance Intercooler is backed by our signature Mishimoto Lifetime Warranty.
Complete intercooler kit engineered to reduce intake air temperatures for increased power and efficiency. Includes high-quality components for optimal airflow, improved throttle response, and a precise, easy installation.- 21.2-degree reduction in outlet temperature over stock intercooler
- Dyno-proven max gains of 13.6 HP and 16.7 lb-ft torque
- 77-percent increase in core volume
-
The Bronco is back, and with two powerful turbocharged engines, it was born to run free. The larger of the two EcoBoost engines, the 2.7L twin-turbo V6, cranks out 330 horsepower and 325 lb.-ft. of torque, making it capable both on and off-road. But what enthusiast doesn’t want more from their vehicle? We here at Mishimoto are never ones to settle for stock, so that’s why we’ve developed these performance intercooler pipes for your 2021+ Ford Bronco 2.7L EcoBoost.—-Our intercooler pipes are constructed from cast and mandrel-bent aluminum for unsurpassed durability. Unlike the stock plastic pipes, our cast-aluminum hot-side Y-pipe and throttle body inlet provide superior resistance to cracking after thousands of heat cycles. For even more durability, we’ve replaced the factory rubber sections with mandrel-bent aluminum for significantly increased boost tolerance. Serrated coupler connections at the Y-pipe and throttle body ensure your boost stays where you want it under even the most extreme conditions.—-But durability isn’t the only benefit these pipes offer. The Mishimoto performance intercooler pipes reduce restriction by up to 34.2-percent over the stock pipes. That increase in flow allows your Bronco to pull in more air for power gains of over 5 HP and 6.1 lb-ft. of torque on the stock tune.—-If you’re ready to let your 2021+ Ford Bronco 2.7L EcoBoost breathe as free as it can run, these Mishimoto Performance Intercooler Pipes are for you. And, like all Mishimoto products, they’re backed by our Lifetime Warranty, so you can drive easy knowing we’ve got you covered.
Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.- Dyno-proven power gains of 5.4 HP and 6.1 lb-ft. of torque on stock tune
- 2-1/4-inch to 2-1/2-inch hot-side piping and 2-3/4-inch cold-side piping
- Up to 34.2-percent less restrictive than stock pipes
-
The Ford Bronco has a heritage of tough, go-anywhere capability. The 2021+ Bronco is no different and deserves a cooling system that can stand up to the task. Here at Mishimoto, we never back down from a challenge, so we developed a high-mount intercooler to let your 2.3L or 2.7L EcoBoost breathe the coolest, densest air possible to help improve performance and overall efficiency. We relocated this high-mount intercooler to the upper grille to allow greater clearance, improved entry and exit angle, and protect your intercooler from obstacles on the trail. This relocation also frees up your front bumper for winches and other essential off-road accessories. We’ve also included new ducting to ensure ample airflow through the intercooler in its new location. The Mishimoto High-mount Intercooler features a 3.1 inch-thick core with precision TIG-welded cast aluminum end tanks. Compared to the factory tube-and-fin intercooler, durability against heat, pressure, and debris on the road or trail is significantly improved.—-More durability is always a good thing, but it’s even better when it’s backed by performance. This high-mount intercooler boasts an increase of 49-percent core volume and 93-percent external fin surface area, which results in a reduction of outlet temperatures by 21-degrees (2.3L EcoBoost) / 15.5-degrees (2.7L EcoBoost) over stock. Combined, this generates gains of 4.5 hp and 10.8 lb-ft of torque for the 2.3L EcoBoost and 8.0 hp and 10.2 lb-ft torque for the 2.7L EcoBoost. We saw exceptional improvement in our trail simulation heat-soak testing where, after 6 back-to-back dyno runs, we still saw outlet temperatures 20-degrees cooler than stock. Functionality of adaptive cruise control is retained utilizing a relocation bracket and 360-degrees cameras are unaffected. As with all our products the Mishimoto 2021+ Ford Bronco High-mount Intercooler is backed by our signature Mishimoto Lifetime Warranty.
High-efficiency intercooler engineered to reduce intake air temperatures for improved power and engine performance. Durable construction ensures optimal heat exchange, consistent boost, and a precise, reliable fit.- Dyno-proven max gains of 4.5 hp and 10.8 lb-ft (2.3L EcoBoost) / 8.0 hp and 10.2 lb-ft torque (2.7L EcoBoost)
- Relocates intercooler for better airflow with winches, lights, and other off-road accessories
- Up to 21-degree reduction in outlet temperature over stock intercooler
Showing 26857–26868 of 33639 results