-
Edelbrock’s AVS2 #1901-CP with Electric Choke is a special Chrome Plasma finished 500 CFM street carb with annular flow booster technology for near-EFI-like drivability that you can feel as soon as you step on the gas. The AVS2 1901-CP features an annular ring with eight evenly spaced orifices replacing the standard single brass tube (down-leg) fuel feed. The AVS2 booster ring distributes fuel into the airflow stream with an even spray to eliminate flat spots and greatly improves throttle response in the low-to mid-RPM range without sacrificing top-end power. The Chrome Plasma finish is applied is a 7-stage process to ensure the most durable and brilliant finish possible.
The durable AVS2 is unaffected by engine backfires since there are no power valves to blow out. For fast and simple part-throttle tuning, metering rods and springs can be changed in seconds without carburetor removal or fuel draining. AVS2 carbs have the unique ability to hold a tune when compared to other carburetors. Your tuning and adjustments stay unchanged, so performance remains consistent. Updated primary and secondary booster clusters in the AVS2 offer the most accurate and up-to-date calibration available for today’s fuels and octane levels. Additionally, the unique Qwik-Tune secondary air valve allows for limitless calibration of the secondary circuit. Adjustments can be made with simple hand tools in seconds to suit your application.
AVS2 Carburetors feature a two-piece design for easy tuning that allows you to make float level adjustments or replace internal components without draining the carburetor or removing it from the engine. The 1901-CP AVS2 500 CFM is manufactured by Edelbrock in the USA.
Edelbrock’s AVS2 #1901-CP with Electric Choke is a special Chrome Plasma coated 500 CFM street carb with annular flow booster technology for near-EFI-like drivability that you can feel as soon as you step on the gas. Made in the USA. -
Edelbrock’s Annular Flow Booster technology brings superior fuel atomization to all dual-quad applications with the AVS2 500 CFM Carburetor #1903 that is specially calibrated for engines running two four-barrels. Annular Flow Boosters deliver near EFI-like drivability that you can feel as soon as you step on the gas. Fuel distribution is refined by eight equally spaced orifices in the booster rings that replace down-leg boosters which simply dump raw fuel into the venturi. Flat spots are completely eliminated, and throttle response in the low- to mid-RPM range is improved tremendously with no sacrificing of that top-end power that Edelbrock is known for. The AVS2 is unaffected by engine backfires since there are no power valves to blow out. For fast and simple part-throttle tuning, metering rods and springs can be changed in seconds without carburetor removal or fuel draining. AVS2 carbs have the unique ability to “hold a tune” when compared to other carburetors. Your tuning and adjustments stay unchanged, so performance remains consistent. Updated primary and secondary booster clusters in the AVS2 offer the most accurate and up-to-date calibration available for today’s fuels and octane levels. Additionally, the unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit. Adjustments can be with simple hand tools in seconds to suit your application. The AVS2 features a two-piece ease-of-tuning design that lets you make float level adjustments or replace internal components without draining the fuel from the carburetor or removing it from the engine. The AVS2 500 CFM carburetor is available with electric (#1903) or manual (#1904) choke in satin or EnduraShine finish. For small-cubic-inch single carburetor engines, order the specially calibrated AVS2 500 CFM #1901 (electric choke) or #1902 (manual choke). Like all Edelbrock carburetors, the AVS2 Series is designed, manufactured, assembled and calibrated by Edelbrock in the USA.
Edelbrock’s Annular Flow Boosters brings superior fuel atomization to all dual-quad applications with the AVS2 500 CFM Carburetor #1903 specially calibrated for engines running two four-barrels. Single-carb AVS2 also available (1901/1902).- AVS2 Carburetor
-
Edelbrock part #7562 RPM Air-Gap 2-R intake manifold is designed for street 396-502 c.i.d. Chevrolet V8’s with high-performance rectangular-port heads. The open air space separates the runners from the hot engine oil, and as a result, the air/fuel mixture stays cooler for a denser charge and more power Includes rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all late model alternator and A/C brackets for the street.
Edelbrock Performer RPM 2-R Intake Manifold for Chevrolet 396-502 Big-Block V8
Chevrolet:Big-Block Mark IV:396 (6.5L)-502 (8.2L)- Edelbrock Total Power Package Maximizes Gains
-
Edelbrock part #7561 RPM Air-Gap 2-O intake manifold is designed for street 396-502 c.i.d. Chevy V8’s with large oval-port cylinder heads (1975 and earlier) or Edelbrock Performer/Performer RPM heads. This RPM Air-Gap incorporates the same race-winning technology that’s been used on our Victor Series competition intakes for decades. The Air-Gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Includes rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all late model alternator and A/C brackets for the street. For square bore carburetors only. Will not fit under stock hood of Corvette, 1964-67 Chevelle or 1967-81 Camaro. No provision for exhaust heated chokes and no exhaust crossover.
Edelbrock RPM Air-Gap 2-O Intake Manifold for Chevrolet 396-502 Big-Block V8
Chevrolet:Big-Block:396 (6.5L)-502 (8.2L)- Edelbrock Total Power Package Maximizes Gains
-
Edelbrock Rollin’ Thunder Camshaft #2261 is designed for 396-502 V8 Mark IV and Gen V engines from 1967-95 and produce optimum torque from the low-end to the mid-range. Rollin’ Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you’ll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 611HP and 573 Ft Lbs of Torque when paired with Victor Jr. intake manifold #2902 and Victor Jr. 24 Degree cylinder heads #77485 on a GM ZZ-502 short block. Not for 1965-66 Big Block Chevy’s running a grooved rear cam journal. Use with a high stall torque converter and stock ratio rocker arms only. Camshaft specifications: – Intake duration: 236 Degrees – Exhaust duration: 245 Degrees – Intake lift: .625″ – Exhaust lift: .639″ – Lobe separation: 112 Degree – Intake Center Line: 109 Degree – Vacuum: 10″
Edelbrock Rollin’ Thunder Camshaft #2261 is designed for 396-502 V8 Mark IV and Gen V engines from 1967-95 and produce optimum torque from the low-end to the mid-range.
Chevrolet:Big-Block Mark IV:396 (6.6L)/402 (6.6L)/427 (7.0L)/454 (7.4L)/502 (8.2L);Chevrolet:Big-Block Gen V:396 (6.6L)/402 (6.6L)/427 (7.0L)/454 (7.4L)/502 (8.2L)- Use Only Stock Ratio Rocker Arms
-
Edelbrock part #29165 Super Victor BBC #29165 Tall-Deck EFI intake manifold is designed for Chevy big-blocks with rectangular port cylinder heads. This single-plane design is ideal for 500+ cubic-inches or any big-block drag race engine with high air flow requirements. In dyno testing, Super Victor #29165 Tall-Deck EFI outperformed the competition out-of-the-box with just a port match and minor blending of critical surfaces.
Edelbrock Super Victor EFI Tall Deck Intake Manifold For Chevrolet 500+ Ci. Big-Block V8
Chevrolet:Big-Block Mark IV:396 (6.6L)/402 (6.6L)/427 (7.0L)/454 (7.4L)/502 (8.2L)- Ideal For Big Block Drag Eng. w/High Flow Req.
-
Edelbrock part #29275 Super Victor BBC EFI intake manifold is designed for Chevy big-blocks with rectangular port cylinder heads. It features a single-plane design that is ideal for 500+ cubic-inches or any big-block drag race engine with high air flow requirements. In dyno testing, Super Victor #29275 EFI outperformed the competition out-of-the-box with just a port match and minor blending of critical surfaces.
Edelbrock Super Victor 454 BBC EFI Intake Manifold For Chevrolet 500+ Ci. Big-Block V8
Chevrolet:Big-Block Mark IV:396 (6.6L)/402 (6.6L)/427 (7.0L)/454 (7.4L)/502 (8.2L)- Ideal For Big Block Drag Eng. w/High Flow Req.
-
The Edelbrock part #77419 Victor 24 Deg 340cc cylinder head features a rolled over deck, altered valve locations and partially CNC’d 199cc chambers for cost effective performance. The Edelbrock 77419 cylinder head comes bare and will need a final valve job and guide sizing before use. The 340cc rectangle ports produce impressive flow and great power on competition big-blocks with 4.470″ or larger bore. Exhaust port exits are raised .534″.
Edelbrock #77419 Victor 24 Degree is a bare cylinder head designed for Big Block Chevy 396-502 V8 engines. The Victor 24 Deg features a rolled over deck, altered valve locations and partially CNC’d chambers for cost effective performance.
Chevrolet:Big-Block Mark IV:396 (6.5L)-502 (8.2L)- Partially CNC Chambers And Exhaust Throats
-
Edelbrock introduces its new Big Vic CNC 12-degree race head, specifically designed for maximum competition naturally aspirated, nitrous injected, and boosted applications. The Big Vic 12 is cast in the USA at Edelbrock’s state-of-the-art foundry, using a premium aluminum alloy that undergoes hot isostatic pressing for a more stable and dense grain structure. The large CNC oval ports and 2.500 x 1.800 valve job are specifically designed to maintain high airspeed for maximum cylinder fill during valve opening and generate a high torque curve throughout the engine’s operating range. Manufactured with premium materials and machined to the industry’s tightest tolerances, these heads feature a 12-degree valve angle, copper valve seats, and fully CNC-machined 498cc ports and 82cc chambers to increase overall airflow capability. The premium manganese bronze valve guides withstand long wear with emphasis placed on holding precise tolerances on valve seat concentricity, allowing the valves to seal securely to eliminate leak-down and increase cylinder pressures during engine operation.
Edelbrock’s Big Victor cylinder heads are made with premium HIP aluminum alloy. They feature 498cc raised intake ports, 82cc chambers, and 2.500″ / 1.800″ Ex valve job. -
Cylinder Head Specifications: Combustion chamber volume: 92cc; Intake runner volume: 442 (lh) / 451 (rh); Exhaust runner volume: 189cc; Intake valve diameter: 2.45″ (Valves Not Included); Exhaust valve diameter: 1.85″ (Valves Not Included); Valve stem diameter: N/A; Valve guides: Manganese bronze; Deck thickness: N/A; Valve spring diameter: Pocket diameter 1.76″ (springs not included); Valve spring maximum lift: N/A; Rocker stud: Use Jesel KPS-381754 shaft-mount; Guideplate: N/A; Pushrod diameter: N/A; Valve angle: 18° x 4.0° intake; 9° x 3.9° exhaust; Exhaust port location: N/A; Spark plug fitment: 14mm x 3/4 reach, gasket seat. * Intended for high output, large cubic inch racing engines with 4.84″ bore spacing, this head is an improvement over existing 18° designs, such as the Big Chief & Big Duke. The casting is made from A-356 aluminum and is Hot Isostatic Pressing processed (HIP) for superior strength, durability, dimensional stability and exceptional finish quality. These cylinder heads feature CNC ported intake ports and a raised exhaust runner design for improved flow efficiency. Chambers are fully CNC ported and extra material is included in the deck to allow fine tuning of the combustion chamber design, if desired. Edelbrock and Pat Musi worked with Jesel to improve the valvetrain geometry, delivering Pro-Stock level technology on engines up to 10,000 rpm. Jesel’s shaft-mounted system, #KPS-387154, is made from lightweight 7000 series aluminum and features a one-piece stand design that pairs the intake and exhaust stands for improved valvetrain stability. The intake features a 1.820″ long fulcrum and is available in 1.60:1 – 1.95:1 rocker ratios; the exhaust features a 2.000″ long fulcrum and available in 1.60:1 – 2.00:1 rocker ratios. Requires Edelbrock valve covers #4259. Match with Edelbrock Victor CNC Series manifolds #28003 and #28005. Pro-Port version available for custom porting.
Cylinder Head; Chevrolet; Big Victor; Big Block (Pro Port); HIP d; 14-deg. Intake Valve- 4.84 in. Bore Spacing/Unmachined Combustion Chambers
- Requires Edelbrock Valve covers PN 4259
- High Isostatic Pressing Design
- For Big Block Chevy
- Bare Head
-
The Edelbrock part #77929 Big Block Chrysler Victor Series cylinder head is used by many of the best racers in the country and are the best choice for all-out competition. Edelbrock engineers work with leading racers like Billy Glidden, John Urist and Pat Musi to produce the ultimate components for racing. The end results is a competition ready cylinder head that features a cylinder head which is compatible with OE valve train and pistons for bolt-on convenience while Victor cylinder head features raised runners, revised chambers and relocated valves for all-out competition.VICTOR B/B CHRYSLER FEATURES:- The best standard port location cylinder head available for competition big-block Chryslers- Intake ports are raised .650″, exhaust ports are raised .250″ for improved flow- The intake flange is extended .950″ to eliminate the need for intake spacer plates- Cylinder head will fit Edelbrock Victor manifolds for both high and low deck engines- Sold without springs or retainers; use recommended springs to match your camshaft- Exhaust flange is extended .300″ from stock (same as Mopar Stage 6) featuring dry exhaust bolt holes with Heli-Coil thread inserts- 72cc combustion chamber volume- Cylinder head part #77939 comes bare with valves only
Edelbrock part #77929 Big Block Chrysler Victor Series cylinder heads are used by many of the best racers in the country and are the best choice for all-out competition.- Can Be Machined To Match Max Wedge Ports
-
Edelbrock part #2515 Buick B-4B intake manifold is a resurrection of the popular B-4B manifold made in the late 1960s for street 400-430-455 c.i.d. Buick V8’s. The only change to the original design is the addition of our proven Performer-style carb pad that accepts either square-bore or spread-bore carbs, making this manifold an excellent choice for both restoration and performance-minded Buick fans. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.
Edelbrock Buick B-4B 455 Intake Manifold for Buick 400-430-455 Big-Block V8 is designed for street 400-430-455 c.i.d. Buick V8s. Accepts Either OEM 4-bbl or 4150-Style Square-Bore Carburetors. Non-EGR
Buick:Big-Block:400 (6.6L)/430 (7.0L)/455 (7.5L)- Accepts both OEM/Edelbrock Square Bore Carbs
Showing 25873–25884 of 67323 results