-
The venerable S58 found in the G8X M2, M3, and M4 follows BMW’s tried and true formula of six cylinders in a row sending power to the back wheels for maximum tire-torturing fun. From the factory, the S58 cranks out up to 503 horsepower and 479 lb.-ft. of torque, but the two turbos tucked next to the engine whisper a tale of limitless possibilities with every shove of the throttle. If you can’t hear them, it might be time to let them whisper a little louder with this performance charge pipe from Mishimoto.—-The stock M2/M3/M4 charge pipe has the crucial job of transporting boost from both turbos to the intake manifold and intercooler so it can be turned into power by the engine. Looking at the stock charge pipe, however, you might not think BMW thought this was particularly important. Two rubber hoses carry that precious boost out of the turbos and into an (ugly) plastic merge before it enters the intercooler. Some owners are already seeing cracks and failures of this plastic merge on M2s, M3s, and M4s pushing more boost. Luckily, Mishimoto has a solution.—-The Mishimoto G8X M2/M3/M4 performance charge pipe replaces the stock rubber and plastic with robust silicone and cast aluminum for a charge pipe that’s stronger and 27% less restrictive than stock. Our charge pipe retains the flexibility of the stock front section but replaces the stock rubber hoses with durable silicone for greater heat and pressure tolerance. The plastic merge has been replaced with cast aluminum for a significant durability upgrade, while the transitions have been smoothed to allow improved flow to support future performance upgrades.—-This performance charge pipe is a direct fit for your 2021+ BMW G8X M2/M3/M4 and is backed by our Mishimoto Lifetime Warranty for a lifetime of letting your legend breathe free. So, if you’re ready to unleash the limitless potential of your M2, M3, or M4, this Mishimoto performance charge pipe is for you.
Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.- Replaces fragile plastic with durable cast aluminum to help prevent costly failures
- 27% less restrictive than stock for improved flow and power potential
- Optimized transitions reduce restrictions and improve flow
-
Keep your 2021+ BMW M2/M3/M4 cool and collected with the Mishimoto 2021+ BMW M2/M3/M4 performance oil cooler. Much like their predecessors, the G8X M2, M3, and M4 were designed with efficiency in mind. This can be a double-edged sword, as the optimally arranged engine bay has components placed in precarious positions. Most notably, the oil cooler is placed on the undercarriage, parallel to the road’s surface. This placement increases air flow and uses aerodynamics to pull air through the core, but it also makes the stock cooler vulnerable to scrapes, bumps, and other road hazards. –With this in mind, the engineers at Mishimoto set out to design a robust G8X oil cooler to keep your M3 or M4 running cool on and off the track. We started by swapping the stock tube-and-fin cooler for a bar-and-plate with CNC-machined end tanks. Our cooler boasts a 35.7-percent thicker core and a 41-percent increase in core volume for superior cooling efficiency. Our cooler fits directly in place of the stock unit and retains the stock seals and bash guards for optimal airflow and additional protection.–The Mishimoto performance oil cooler for the 2021+ BMW G8X M2/M3/M4 includes everything needed for installation and, as with all Mishimoto products, it’s protected by the Mishimoto Lifetime Warranty for a lifetime of protection and cooling.
High-performance engine oil cooler designed to regulate oil temperature and protect critical engine components. Efficient heat dissipation improves durability, maintains lubrication, and ensures reliable performance.- Full aluminum TIG-welded construction
- N/A
-
The M3 has undergone significant evolution over the years, with each new iteration bringing something new to the table. From the brilliant widebody E30 of the eighties to the exotic sounding V8-powered E9X, each generation has its own identity but holds true to the goals of providing an amazing driving experience. The G8X gets one of the most potent engines produced by BMW to date, the S58B30, along with an option for AWD. Enhancing the S58 was something we set our sights on soon after acquiring a G80 of our own, the first project being our air intake system. Airbox volume, shape, and construction material all play a part in delivering maximum airflow to your engine. Our engineering team created extremely precise rotational-molded thermoplastic airboxes that eliminate restrictions, supply maximum cool-air entry via two additional ports that open to the wheel wells, and improve engine bay aesthetics. The use of thermoplastic material ensures the air intake system will incur minimum engine bay heat soak and provides unmatched durability for years of service in the harshest environments. Our airboxes were designed using the latest in 3D printing, CAD modeling, and flow bench technology. As a result, we reduced air intake restriction by 13 percent on the driver-side intake tract and 22.8 percent on the passenger-side intake tract. For proper filtration, this kit includes dual high-flow oiled air filters which provide improved filter surface area and improved airflow over the stock panel filters. In addition to the flow benefits, our intake system provides a significant amplification of turbocharger spool and bypass valve venting. These enhanced sounds provide a new level of enjoyment, adding to the incredible driving experience you expect from a BMW M-Series. The Mishimoto 2021+ BMW G8X M2/M3/M4 Performance Intake is a complete bolt-on kit and includes all necessary components for an easy installation.
Performance cold air intake kit engineered to increase airflow for improved horsepower and throttle response. Includes high-quality components for enhanced filtration, efficient airflow, and a precise fit.- Reduces intake restriction by up to 22.8-percent for more power potential
- Provides safe operation on a stock ECU tune
- Aggressive intake tone under acceleration
-
Keep your 2021+ BMW G8X M2/M3/M4 engine temperature under control with Mishimoto’s Performance Auxiliary Radiators. These radiators are sold as a pair and feature full-aluminum end tanks that are TIG-welded to custom-engineered cores for maximum durability and performance. The increased fluid capacity and 25-percent increase in core volume ensures optimal heat dissipation and effective temperature regulation for both stock and modified vehicles, making them an essential upgrade for high-performance driving.–In addition to their robust construction, these radiators feature strutted tubes, providing further reinforcement against vibration and impacts. For additional protection, steel stone guards are available separately. As with all Mishimoto products, the 2021+ BMW G8X M2/M3/M4 Performance Auxiliary Radiators feature the Mishimoto Lifetime Warranty for a worry-free cooling as long as you own them.
Aluminum radiator engineered for efficient heat dissipation and optimal engine cooling. Precision-fit design ensures easy installation, corrosion resistance, and reliable performance across varied driving conditions.- Strutted tubes provide further reinforcement against vibration and impacts
- 25-percent increase in core volume for improved heat transfer
- Aluminum, TIG-welded end tanks for maximum durability
-
The M3 has undergone significant evolution over the years, with each new iteration bringing something new to the table. From the brilliant widebody E30 of the eighties to the exotic sounding V8-powered E9X, each generation has its own identity but holds true to the goals of providing an amazing driving experience. The G8X gets one of the most potent engines produced by BMW to date, the S58B30, along with an option for AWD. Enhancing the S58 was something we set our sights on soon after acquiring a G80 of our own, the first project being our air intake system. Airbox volume, shape, and construction material all play a part in delivering maximum airflow to your engine. Our engineering team created extremely precise carbon fiber airboxes that eliminate restrictions, supply maximum cool-air entry via two additional ports that open to the wheel wells, and improve engine bay aesthetics. The use of carbon fiber material ensures the air intake system will incur minimum engine bay heat soak and provides unmatched aesthetic appeal. Our airboxes were designed using the latest in 3D printing, CAD modeling, and flow bench technology. As a result, we reduced air intake restriction by 13 percent on the driver-side intake tract and 22.8 percent on the passenger-side intake tract. For proper filtration, this kit includes dual high-flow oiled air filters which provide improved filter surface area and improved airflow over the stock panel filters. In addition to the flow benefits, our intake system provides a significant amplification of turbocharger spool and bypass valve venting. These enhanced sounds provide a new level of enjoyment, adding to the incredible driving experience you expect from a BMW M-Series. The Mishimoto 2021+ BMW G8X M2/M3/M4 Performance Intake is a complete bolt-on kit and includes all necessary components for an easy installation. As with all Mishimoto products, this carbon fiber performance intake kit includes our signature Mishimoto Lifetime Warranty.
Performance cold air intake kit engineered to increase airflow for improved horsepower and throttle response. Includes high-quality components for enhanced filtration, efficient airflow, and a precise fit.- Washable oiled filters can be cleaned and refreshed using our Filter Re-Oil Kit for a lifetime of use
- Constructed from solid 3K twill-woven carbon fiber in your choice of matte or gloss finish
- Patent US No. 11,506,157 B2
-
The M3 has undergone significant evolution over the years, with each new iteration bringing something new to the table. From the brilliant widebody E30 of the eighties to the exotic sounding V8-powered E9X, each generation has its own identity but holds true to the goals of providing an amazing driving experience. The G8X gets one of the most potent engines produced by BMW to date, the S58B30, along with an option for AWD. Enhancing the S58 was something we set our sights on soon after acquiring a G80 of our own, the first project being our air intake system. Airbox volume, shape, and construction material all play a part in delivering maximum airflow to your engine. Our engineering team created extremely precise carbon fiber airboxes that eliminate restrictions, supply maximum cool-air entry via two additional ports that open to the wheel wells, and improve engine bay aesthetics. The use of carbon fiber material ensures the air intake system will incur minimum engine bay heat soak and provides unmatched aesthetic appeal. Our airboxes were designed using the latest in 3D printing, CAD modeling, and flow bench technology. As a result, we reduced air intake restriction by 13 percent on the driver-side intake tract and 22.8 percent on the passenger-side intake tract. For proper filtration, this kit includes dual high-flow oiled air filters which provide improved filter surface area and improved airflow over the stock panel filters. In addition to the flow benefits, our intake system provides a significant amplification of turbocharger spool and bypass valve venting. These enhanced sounds provide a new level of enjoyment, adding to the incredible driving experience you expect from a BMW M-Series. The Mishimoto 2021+ BMW G8X M2/M3/M4 Performance Intake is a complete bolt-on kit and includes all necessary components for an easy installation. As with all Mishimoto products, this carbon fiber performance intake kit includes our signature Mishimoto Lifetime Warranty.
Performance cold air intake kit engineered to increase airflow for improved horsepower and throttle response. Includes high-quality components for enhanced filtration, efficient airflow, and a precise fit.- Washable oiled filters can be cleaned and refreshed using our Filter Re-Oil Kit for a lifetime of use
- Constructed from solid 3K twill-woven carbon fiber in matte or gloss finish
- Patent US No. 11,506,157 B2
-
The ZF 8-speed transmission found in the 2021+ BMW G8X M2/M3/M4 is a stout and snappy unit that’s capable of withstanding the onslaught of torque brought on by the S58 engine it’s mated to. Add a tune and some bolt-ons, and the stock cooler just can’t keep the ZF 8HP safe. This inadequacy can lead to high transmission oil temperatures, sluggish shifting, and potential transmission damage. Fortunately, the engineers at Mishimoto have developed a transmission cooler to maintain optimal fluid temps and keep your ZF 8HP running in peak condition.—-The Mishimoto 2021+ BMW G8X M2/M3/M4 Performance Transmission Cooler excels with its impressive 41-percent increase in core volume, delivering superior cooling efficiency compared to the stock cooler and keeping your transmission cool even in the most demanding driving conditions. This transmission cooler also offers a generous 17-percent increase in fluid capacity to increase the cooling potential of the entire system. Internal cooling fins increase the surface area in contact with the fluid to improve heat transfer and efficiency. The dual-pass design keeps fluid in the cooler longer, removing more heat without affecting airflow to other cooling components behind the transmission cooler.—-High fluid temps aren’t the only worry on the track or the road
Automatic transmission oil cooler designed to regulate fluid temperature and prevent overheating. Enhances transmission longevity, maintains performance, and features durable construction with a precise fit.- Dual-pass design improves cooling performance without reducing airflow to other components
- 17 percent increase in fluid capacity for added cooling potential
- 41 percent increase in core volume for fast and efficient cooling
-
Introducing the Mishimoto 2021+ BMW G8X M2/M3/M4 performance heat exchanger, the ultimate solution to keep your charge air cool under the most demanding conditions. In the world of forced induction vehicles, air-to-water intercooling is the future, and Mishimoto are taking it to the next level.—-We started from scratch, leaving no room for compromise. Our design eliminates all plastic components, replacing them with durable aluminum end tanks, core, and CNC-machined ports. TIG-welded for maximum strength and longevity, this heat exchanger will withstand even the harshest conditions. We took it further by incorporating strutted tubes within the core, adding unparalleled resistance against bowing and flexing during aggressive cornering.—-But strength is not our only focus. We’ve increased the core volume by 23 percent and expanded the external fin surface area by 44 percent. Combined with our dual-pass flow configuration and louvered fin design, this performance heat exchanger vastly improves cooling capacity over stock, enhancing overall performance.—-Rest assured, the Mishimoto Performance Heat Exchanger for the 2021+ BMW G8X M2/M3/M4 is designed to fit perfectly with all other factory components, ensuring seamless integration into your vehicle. For added protection, we include steel rock guards to shield the heat exchanger from debris and prevent punctured tubes or crushed fins. The Mishimoto G8X M2/M3/M4 performance heat exchanger fits both automatic and manual transmissions.—-The Mishimoto 2021+ BMW G8X M2/M3/M4 performance heat exchanger comes with our renowned Mishimoto Lifetime Warranty, giving you peace of mind and confidence in your investment. Upgrade your BMW G8X M2/M3/M4 with the Mishimoto Heat Exchanger and experience the true power of cooling efficiency.
High-performance component designed to enhance thermal efficiency, durability, and reliability under demanding conditions. Engineered to support optimal temperature control and system performance across applications.- 44 percent increase in external fin surface area for greater heat transfer
- 23 percent increase in core volume improves cooling capacity
- Fits 2021+ BMW G8X M2/M3/M4
-
Introducing the Mishimoto 2021+ BMW G8X M2/M3/M4 performance heat exchanger, the ultimate solution to keep your charge air cool under the most demanding conditions. In the world of forced induction vehicles, air-to-water intercooling is the future, and Mishimoto are taking it to the next level.—-We started from scratch, leaving no room for compromise. Our design eliminates all plastic components, replacing them with durable aluminum end tanks, core, and CNC-machined ports. TIG-welded for maximum strength and longevity, this heat exchanger will withstand even the harshest conditions. We took it further by incorporating strutted tubes within the core, adding unparalleled resistance against bowing and flexing during aggressive cornering.—-But strength is not our only focus. We’ve increased the core volume by 23 percent and expanded the external fin surface area by 44 percent. Combined with our dual-pass flow configuration and louvered fin design, this performance heat exchanger vastly improves cooling capacity over stock, enhancing overall performance.—-Rest assured, the Mishimoto Performance Heat Exchanger for the 2021+ BMW G8X M2/M3/M4 is designed to fit perfectly with all other factory components, ensuring seamless integration into your vehicle. For added protection, we include steel rock guards to shield the heat exchanger from debris and prevent punctured tubes or crushed fins. The Mishimoto G8X M2/M3/M4 performance heat exchanger fits both automatic and manual transmissions.—-The Mishimoto 2021+ BMW G8X M2/M3/M4 performance heat exchanger comes with our renowned Mishimoto Lifetime Warranty, giving you peace of mind and confidence in your investment. Upgrade your BMW G8X M2/M3/M4 with the Mishimoto Heat Exchanger and experience the true power of cooling efficiency.
High-performance component designed to enhance thermal efficiency, durability, and reliability under demanding conditions. Engineered to support optimal temperature control and system performance across applications.- 44 percent increase in external fin surface area for greater heat transfer
- 23 percent increase in core volume improves cooling capacity
- Fits 2021+ BMW G8X M2/M3/M4
-
This Mishimoto Aluminum Transmission Pan is a direct-fit, high-performance upgrade for your Ford 10R60/10R80 transmission in your Bronco, Ranger, F-150, or Mustang. Cast from high-quality aluminum and powder coated Gunmetal Gray, our transmission pan is a robust and long-lasting upgrade for your vehicle’s transmission. With a sleek design and bottom ribs, this pan not only adds to the overall aesthetic of your vehicle but also provides improved cooling performance.—-This transmission pan features internal baffles that reduce sloshing and enhance heat dissipation, resulting in smoother transmission performance. All the headaches that come with a flat gasket and messy sealants are eliminated with our precision-machined dovetail-style groove and O-ring seal. This groove positively retains the O-ring, so you never have to worry about it falling out of place during installation. Additionally, the Mishimoto Ford 10R60/10R80 Aluminum Transmission Pan adds an extra 2 quarts of ATF to help maintain optimal transmission operation.—-Fed up with the frustration of trying to hold up a transmission pan with one hand while threading the fasteners in with the other? Mishimoto has you covered with pre-installed bolt retainers that hold the fasteners in the pan, allowing you to easily thread the bolts without dropping them on the ground, your head, or worse, that pan of nasty transmission fluid you just drained. Additionally, our pan comes equipped with a magnetic drain plug for easy draining and a 1/8-inch NPT port and plug for temperature sensors to make servicing your transmission and monitoring temperatures a breeze.—-This direct-fit upgrade offers affordable durability and helps maintain smooth transmission operation, ensuring a long life for your transmission. Like all Mishimoto products, this transmission pan is backed by the Mishimoto Lifetime Warranty.
High-performance component engineered for durability, efficiency, and reliable operation under demanding conditions. Designed to support optimal system function across a wide range of automotive applications.- Increases fluid capacity by 2 quarts over the stock transmission pan for more cooling capacity
- Durable cast-aluminum construction for long-lasting performance
- Bolt retainers hold fasteners in place for easy installation
-
The goal of any well-designed intake system is to provide your engine with as much cool, clean air as possible. This is especially important when you’re cramming air into the engine with a turbocharger (or two). Access to cold and clean air becomes increasingly difficult, however, when you’re bombing dusty trails or muddy bogs in the summer heat with your Bronco. Luckily, Mishimoto and Borne Off-Road have the complete solution to keep cool, clean air flowing through the 2.7L EcoBoost in your 2021+ Ford Bronco. This snorkel and intake package for your 2021+ Ford Bronco ensures your engine can breathe in cool, clean air no matter where you are.—-The Borne Off-Road snorkel moves the fresh air inlet to roof height, allowing the engine to draw in cleaner air on the trail. Our precision rotational-molded tube is made from durable, UV-resistant cross-linked polyethylene that can withstand the heat of the sun and any debris the trail can throw at it. The top of our snorkel includes a 6-inch inlet with a steel mesh cover to protect the intake from large debris. This inlet can also be swapped for a pre-filter to help keep your main intake filter clean.—-After the snorkel finds the clean air, the Mishimoto intake takes over to clean it further and add power. The Mishimoto performance intake utilizes a 4.5-in high-flow filter which, combined with the rotomolded construction, results in an intake that is 39.6% less restrictive than stock. That increase in flow yields power gains of 7.5 HP and 7.4 lb.-ft of torque. To protect your high-flow filter through any terrain, we’ve also included a fresh-air intake block-off that can be removed for better flow when not on the trail.—-Combined, these two intake components let your 2021+ Ford Bronco 2.7L EcoBoost breathe freely on any trail or street. Like all our products, this intake bundle is backed by our Mishimoto Lifetime Warranty.
Performance cold air intake kit engineered to increase airflow for improved horsepower and throttle response. Includes high-quality components for enhanced filtration, efficient airflow, and a precise fit.- Snorkel raises fresh air inlet to roof level to capture cool and clean air on the trail
- Intake is 39.6-percent Less restrictive than stock intake
- Fits 2021+ Ford Bronco 2.7L EcoBoost
-
The legendary Ford Bronco has returned, and under the retro-styled hood lies a new legend: the 2.7L EcoBoost. The 2.7L EcoBoost has been powering Fords for nearly a decade and has become one of the most respected truck engines available. The second generation 2.7L features both port and direct injection for efficiency throughout the RPM range. While the added port injection helps clean the intake valves, it doesn’t protect the rest of your engine from the effects of blow-by. As blow-by flows through your intake, it coats components like sensors and your intercooler in a sludge of oil, carbon, and fuel, reducing their ability to function. Blow-by can also reduce the effectiveness of your engine oil. The factory air-oil-separator drains blow-by back into the oil pan, which is great for the environment, but the fuel and water in blow-by can thin your engine oil and reduce its effectiveness. Finally, any blow-by that does make its way back into the cylinder can reduce the effective octane of your fuel and, for a high-strung turbocharged engine like the 2.7L EcoBoost, lower octane means less power. The solution to all of those issues is to capture the blow-by and keep it out of the engine with a Mishimoto catch can. Our direct-fit baffled oil catch can kit for the 2021+ Ford Bronco 2.7L EcoBoost uses custom-molded hoses to intercept blow-by before it enters the intake and captures it to be recycled at your next oil change. Our catch can features an internal baffle and air turbulators that help condense oil, fuel, and water vapor from the blow-by, as well as a 50-micron sintered bronze filter that captures carbon particles. Our catch can is mounted away from engine vibration with a sturdy 2.5mm-thick steel bracket and our molded hoses include Ford-specific quick-disconnect fittings for an easy and clean install. Like all our Ford Bronco products, this catch can kit is backed by our Mishimoto Lifetime Warranty for a lifetime of clean running.
Engine oil catch can kit designed to capture oil vapors and prevent buildup in the intake system. Helps maintain efficiency, reduce carbon deposits, and improve performance with durable components and easy installation.- Pre-installed factory-style quick-disconnect fittings for clean installation
- Sturdy 2.5mm-thick steel brackets withstand rough roads and off-road abuse
- Direct-fit bracket mounts the catch can away from engine vibration
Showing 25033–25044 of 31585 results