-
Edelbrock part #97413 high performance hydraulic roller lifters for Small-Block Chrysler 318-340-360 engines are the perfect match for street and high performance applications. With unsurpassed tolerance capable of high rpm power, these precision self-aligning retro-fit hydraulic roller lifters are designed for use in early model non-roller engine blocks originally equipped with conventional lifters. Sold in complete sets of 16.
Edelbrock part #97413 high performance hydraulic roller lifters for Small-Block Chrysler 318-340-360 engines are the perfect match for street and high performance applications
Chrysler:Small-Block LA-Series:318 (5.2L)/340 (5.6L)/360 (5.9L)- Highest Quality Lifters At A Competitive Price
-
Edelbrock part #97483 high performance hydraulic roller lifters for Big-Block Chrysler 383-400-440 Engines are the perfect match for street and high performance applications. With unsurpassed tolerance capable of high rpm power, these precision self-aligning retro-fit hydraulic roller lifters are designed for use in early model non-roller engine blocks originally equipped with conventional lifters. Sold in complete sets of 16.
Edelbrock part #97483 high performance hydraulic roller lifters for Big-Block Chrysler 383-400-440 Engines are the perfect match for street and high performance applications. Sold in complete sets of 16.
Chrysler:Big-Block B-Series:383 (6.3L)/400 (6.6L);Chrysler:Big-Block RB-Series:413 (6.8L)/426 (7.0L)/440 (7.2L)- Highest Quality Lifters At A Competitive Price
-
Edelbrock part #97433 high performance hydraulic roller lifters for 1990 & earlier Big-Block Chevy Mark IV engines are the perfect match for street and high performance applications. With unsurpassed tolerance capable of high rpm power, these precision self-aligning retro-fit hydraulic roller lifters are designed for use in early model non-roller engine blocks originally equipped with conventional lifters. Sold in complete sets of 16.
Edelbrock part #97433 high performance hydraulic roller lifters for 1990 & earlier Big-Block Chevy Mark IV engines
Chevrolet:Big-Block Mark IV:396 (6.5L)-502 (8.2L)- Originally Equipped w/Conventional Lifters
-
Edelbrock part #97423 high performance hydraulic roller lifters for 1986 and earlier Small-Block Chevy & 348/409 “W-Series” Chevy’s are the perfect match for street and high performance applications. With unsurpassed tolerance capable of high rpm power, these precision self-aligning retro-fit hydraulic roller lifters are designed for use in early model non-roller engine blocks originally equipped with conventional lifters. Sold in complete sets of 16.
Edelbrock part #97423 high performance hydraulic roller lifters for 1986 and earlier Small-Block Chevy & 348/409 “W-Series” Chevy’s are the perfect match for street and high performance application
Chevrolet:Small-Block Gen I:262 (4.3L)-400 (6.6L);Chevrolet:W-Series:348 (5.7L)-409 (6.7L)- Originally Equipped w/Conventional Lifters
-
Block Specifications: Designed from heavy-duty A357-T6 aluminum material; 4.125”-4.165” siamese cast bore walls w/ press-in spun cast iron liner; Available in standard (9.240”) & tall (9.750”) deck heights w/ beefy .750” deck thickness; Both standard deck (5.67”/5.87”- same as LS7) & tall deck (5.94”/6.38”) cylinder liner lengths available; “Long arm friendly” – Accommodations for up to 4.6” stroke w/ standard rod pin diameters (2.100”) & oversized 60mm camshaft; Main cap surface area maximized at mating surface & large fillets from cap to cross bolts for added strength; Designed for clearance – side oil galley moved outboard & engineered rod clearance come standard; Significantly increased windage passage area under bores & around caps over LS7/LSX engines; 6 head bolt design w/ full water jacket around the cylinders (based on LS7 design); Bay-to-bay breathing improved w/ increased side window area versus LSX & LS7; Extra-large windows in valley for access to inboard “6th” head bolt; Extra-long liners for standard (5.87”) & tall (6.38”) decks
This block has a 9.240 deck height with a 4.125 bore and a 5.87 cylinder sleeve length. Cylinder walls are Siamese cast with press-in cast iron sleeves. 12AN feeds for dry sumps. Aircraft-quality A357-T6 aluminum. 6-Head Bolt Design.
Bored and Ready To Hone.- P1 MFG main stud kit standard with enough material in castings to accommodate up to a 0.5 inch fastener
- Gen III/Gen IV compliant with race mounts for Gen I, Gen II, Gen III & Gen IV engines
- Rolled threads on all threaded holes for added strength
- Chilled main bearing bulkheads for added strength
- Optimized billet main caps & improved windage
-
Block Specifications: Designed from heavy-duty A357-T6 aluminum material; 4.125”-4.165” siamese cast bore walls w/ press-in spun cast iron liner; Available in standard (9.240”) & tall (9.750”) deck heights w/ beefy .750” deck thickness; Both standard deck (5.67”/5.87”- same as LS7) & tall deck (5.94”/6.38”) cylinder liner lengths available; “Long arm friendly” – Accommodations for up to 4.6” stroke w/ standard rod pin diameters (2.100”) & oversized 60mm camshaft; Main cap surface area maximized at mating surface & large fillets from cap to cross bolts for added strength; Designed for clearance – side oil galley moved outboard & engineered rod clearance come standard; Significantly increased windage passage area under bores & around caps over LS7/LSX engines; 6 head bolt design w/ full water jacket around the cylinders (based on LS7 design); Bay-to-bay breathing improved w/ increased side window area versus LSX & LS7; Extra-large windows in valley for access to inboard “6th” head bolt; Extra-long liners for standard (5.87”) & tall (6.38”) decks
This block has a 9.750 deck height with a 4.125 bore and a 6.38 cylinder sleeve length. Cylinder walls are Siamese cast with press-in cast iron sleeves. 12AN feeds for dry sumps. Aircraft-quality A357-T6 aluminum. 6-Head Bolt Design.
Bored and Ready To Hone.- P1 MFG main stud kit standard with enough material in castings to accommodate up to a 0.5 inch fastener
- Gen III/Gen IV compliant with race mounts for Gen I, Gen II, Gen III & Gen IV engines
- Rolled threads on all threaded holes for added strength
- Chilled main bearing bulkheads for added strength
- Optimized billet main caps & improved windage
-
Edelbrock part #77790 Red Roller Rocker arms are designed for Big block Chevy’s using 7/16 studs. This 1.7:1 Ratio, set of 16 rockers are manufactured in the USA from lightweight 7129 grade aluminum. The body is CNC machined then micro polished and anodized for durability. The trunnion race, roller pin and roller tip are centerless ground for superior quality. A high quality Torrington needle bearing fulcrum combined with a roller tip ensure smooth operation and performance. The full body design will accommodate up to 1.65″ diameter springs. Thick-walled adjusting nuts and 4140 steel poly locks are included.
Edelbrock part #77790 Red Roller Rocker arms are designed for Big block Chevy’s using 7/16 studs. This 1.7:1 Ratio, set of 16 rockers are manufactured in the USA from lightweight 7129 grade aluminum.
Chevrolet:W-Series:348 (5.7L)-409 (6.7L)- Made In U.S.A.
-
Edelbrock part #77770 Red Roller Rocker arms are designed for small block Chevy’s using 3/8″ studs. This 1.5:1 Ratio, set of 16 rockers are manufactured in the USA from lightweight 7129 grade aluminum. The body is CNC machined then micro polished and anodized for durability. The trunnion race, roller pin and roller tip are centerless ground for superior quality. A high quality Torrington needle bearing fulcrum combined with a roller tip ensure smooth operation and performance. The full body design will accommodate up to 1.65″ diameter springs. Thick-walled adjusting nuts and 4140 steel poly locks are included.
Edelbrock part #77770 Red Roller Rocker arms are designed for small block Chevy’s using 3/8″ studs. This 1.5:1 Ratio, set of 16 rockers are manufactured in the USA from lightweight 7129 grade aluminum.
Chevrolet:Small-Block Gen I:262 (4.3L)-400 (6.6L)- Made In U.S.A.
-
Edelbrock part #77780 Red Roller Rocker arms are designed for small block Ford’s using 3/8 studs. This 1.6:1 Ratio, set of 16 rockers are manufactured in the USA from lightweight 7129 grade aluminum. The body is CNC machined then micro polished and anodized for durability. The trunnion race, roller pin and roller tip are centerless ground for superior quality. A high quality Torrington needle bearing fulcrum combined with a roller tip ensure smooth operation and performance. The full body design will accommodate up to 1.65″ diameter springs. Thick-walled adjusting nuts and 4140 steel poly locks are included.
Edelbrock part #77780 Red Roller Rocker arms are designed for small block Ford’s using 3/8 studs. This 1.6:1 Ratio, set of 16 rockers are manufactured in the USA from lightweight 7129 grade aluminum.
Ford:Small-Block:289 (4.7L)-351W (5.8L)- Made In U.S.A.
-
Edelbrock part #97453 high performance hydraulic roller lifters for 1962-87 Small-Block Ford 289/302 & 1969-93 351W engines are the perfect match for street and high performance applications. With unsurpassed tolerance capable of high rpm power, these precision self-aligning retro-fit hydraulic roller lifters are designed for use in early model non-roller engine blocks originally equipped with conventional lifters. Sold in complete sets of 16.
Edelbrock part #97453 high performance hydraulic roller lifters for 1962-87 Small-Block Ford 289/302 & 1969-93 351W engines are the perfect match for street and high performance applications. Sold in complete sets of 16.
Ford:Small-Block:289 (4.7L)/302 (5.0L)/351W (5.8L)- Originally Equipped w/Conventional Lifters
-
Edelbrock part #77760 Red Roller Rocker arms are designed for small block Chevy’s using 3/8″ studs. This 1.5:1 Ratio, Wide body set of 16 rockers are manufactured in the USA from lightweight 7129 grade aluminum. The body is CNC machined then micro polished and anodized for durability. The trunnion race, roller pin and roller tip are centerless ground for superior quality. A high quality Torrington needle bearing fulcrum combined with a roller tip ensure smooth operation and performance. The full body design will accommodate up to 1.65″ diameter springs. Thick-walled adjusting nuts and 4140 steel poly locks are included.
Edelbrock part #77760 Red Roller Rocker arms are designed for small block Chevy’s using 3/8″ studs. This 1.5:1 Ratio, Wide body set of 16 rockers are manufactured in the USA from lightweight 7129 grade aluminum.
Chevrolet:Small-Block Gen I:262 (4.3L)-400 (6.6L)- Smooth Operation And Performance
-
Edelbrock Rollin’ Thunder Camshaft #2268 is designed for 348/409 (W Series) engines from 1958-65 and produce optimum torque from the low-end to the mid-range. Rollin’ Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you’ll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 451HP and 470 Ft Lbs of Torque when paired with Performer RPM intake manifold #7159, Performer Series Carbs #1412, Performer RPM cylinder heads #60815 and Edelbrock roller tappet lifter set #97423. Must use a high stall torque converter. Camshaft specifications: – Intake duration: 230 Degrees – Exhaust duration: 234 Degrees – Intake lift: .616″ – Exhaust lift: .628″ – Lobe separation: 112 Degree – Intake Center Line: 107 – Vacuum: 10″
Edelbrock Rollin’ Thunder Camshaft #2268 is designed for 348/409 (W Series) engines from 1958-65 and produce optimum torque from the low-end to the mid-range.
Chevrolet:W-Series:348 (5.7L)/409 (6.7L)- Increased Performance
Showing 24901–24912 of 60813 results