-
Edelbrock Part #1725 Performer RPM Series fuel pump is for 289-351W Ford designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high-performance’s street Fuel Pumps feature a high quality three stage polished finish. The unique valve design improves flow quantity and quality, and will support engines up to 600 hp. High-volume, 3/8″ NPT inlet and outlet surpasses the capacity of conventional models. Produces 6 psi and does not require a regulator. Use with gasoline only. Clockable lower housing can be rotated in 60 Deg Increments for best inlet/outlet alignment.
Edelbrock Part #1725 Performer RPM Series fuel pump is for 289-351W Ford designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications
Ford:Small-Block Windsor:260 (4.3L)/289 (4.7L)/302 (5.0L)/351 (5.8L)- Gasoline Or Mixed Fuels Only
-
Edelbrock part #1721 Performer RPM Series fuel pump is for Small-Block and “W Series” Chevrolet designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high-performance’s street Fuel Pumps feature a high quality three stage polished finish. The unique valve design improves flow quantity and quality, and will support engines up to 600 hp. High-volume, 3/8″ NPT inlet and outlet surpasses the capacity of conventional models. Produces 6 psi and does not require a regulator. Use with gasoline only. Clockable lower housing can be rotated in 60 Deg Increments for best inlet/outlet alignment.
Edelbrock part #1721 Performer RPM Series fuel pump is for Small-Block and “W Series” Chevrolet designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications
Chevrolet:Small-Block Gen I:262 (4.3L)/265 (4.3L)/267 (4.4L)/283 (4.6L)/302 (4.9L)/305 (5.0L)/307 (5.0L)/327 (5.4L)/350 (5.7L)/400 (6.6L)- Gasoline Or Mixed Fuels Only
-
Edelbrock part #22754 Max-Fire distributor for Pontiac 326-455 V-8 engines is ready to run right out-of-the-box and are the perfect upgrade for your ignition system. They’re ideal for replacing or upgrading from a points triggered distributor. They feature precision machining for a perfect fit along with a simple three wire hook up for an easy installation with no need to run an external ignition control box. The centerless ground shaft utilizes an upper sealed roller bearing with an extra long lower bronze Oil-Lite bushing for smooth operation. The high output magnetic pickup and large paddle wheel reluctor deliver a strong trigger signal at high RPM for maximum performance. All of these features allow Max-Fire distributors to provide unrivaled voltage to the coil, ensuring that you’re getting maximum performance from your engine. We recommend a new Max-Fire coil for maximum voltage output, ensuring you get the most from your high performance engine at higher RPM’s. Each distributor includes a cap, rotor, retainer and mechanical advance curve kit. FEATURES AND BENEFITS: – CNC machined from 6061-T6 aluminum with O-ring grooves for use in a fully machined engine block – Cap and rotor are molded in high quality 30% glass filled polyester for durability and carbon tracking resistance – Features brass contacts and a stainless steel rotor spring for maximum conductivity – Hardened iron drive gear ensures long service life – Fully adjustable mechanical and vacuum advance for increased mileage potential
Edelbrock part #22754 Max-Fire distributor for Pontiac 326-455 V-8 engines is ready to run right out-of-the-box and are the perfect upgrade for your ignition system.
Pontiac:-:326 (5.3L)/350 (5.7L)/389 (6.4L)/400 (6.6L)/421 (6.9L)/428 (7.0L)/455 (7.4)- Adj. Mechanical And Vacuum Adv. For Increased Mileage Potential
-
Edelbrock part #7576 RPM Air-Gap intake manifold is designed for 340-360 c.i.d. Chrysler V8’s and 318 c.i.d. engines with 340-360 cylinder heads. This RPM Air-Gap incorporates the same race-winning technology that’s been used on our Victor Series competition intakes for years. The Air-Gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Accepts 1975 and earlier waterneck only. No provision for exhaust heated chokes and no exhaust crossover. Will not accept stock Thermo-Quad carburetor. Will not fit 1992 and later Magnum engines. Includes nitrous bosses.
Edelbrock RPM Air-Gap Intake Manifold for 318-340-360 Chrysler Small Block LA engines
Chrysler:Small-Block LA-Series:340 (5.6L)/360 (5.9L)- Accepts Early-Style Water Neck
-
Edelbrock Rollin’ Thunder Camshaft #2281 is designed for 351W Ford V8 engines and produce optimum torque from the low-end to the mid-range. Rollin’ Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you’ll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 449HP and 413 Ft Lbs of Torque when paired with RPM Air-Gap Dual Quad intake manifold #75354 and Performer RPM cylinder heads #60255. Must use a high stall torque converter. Will not work with stock valve springs. Camshaft specifications: – Intake duration: 235 Degrees – Exhaust duration: 238 Degrees – Intake lift: .573″ – Exhaust lift: .582″ – Lobe separation: 112 Degree – Intake Center Line: 107 – Vacuum: 10″
Edelbrock Rollin’ Thunder Camshaft #2281 is designed for 351W Ford V8 engines and produce optimum torque from the low-end to the mid-range.
Ford:Small-Block Windsor:351 (5.8L)- Use Only Stock Ratio Rocker Arms
-
Edelbrock part #3882 Performer RPM 5.8L Upper Plenum Only (includes plenum cover) is designed for 1988-96 Ford 5.8L, EFI, truck engines. The modular design of this intake manifold incorporates the latest air flow technology for maximum torque gains in the mid-range. This Upper Plenum offers a removable plenum cover that allows access to runners. The upper is powder-coated light titanium gray. Use with stock or stock replacement twin throttle body. Will not fit vans or stock manifold base.
Edelbrock part #3882 Performer RPM 5.8L Upper Plenum Only (includes plenum cover) is designed for 1988-96 Ford 5.8L, EFI, truck engines.
Ford:Small-Block Windsor:351 (5.8L)- Increased Performance
-
Edelbrock part #7564 RPM Air-Gap 351C intake manifold design utilizes the same race-winning technology that’s been used on Edelbrock’s Victor Series competition intakes for many decades. Designed to improve performance on the street or racetrack, this manifold features an open space that separates the runners from the hot engine oil resulting in a cooler, denser charge. The RPM Air-Gap manifold for 351 Cleveland engines is designed to complement Edelbrock’s 351C Performer RPM cylinder heads #61609, #61629, #61625 and also works well with 4V and 2V cast iron Cleveland heads.
Edelbrock RPM Air-Gap 351C Intake Manifold for Ford Cleveland Small-Block V8
Ford:Cleveland:351C (5.8L)- Complements Edelbrock New 351C Perf. RPM Cyl Heads
-
Edelbrock part #22758 Max-Fire distributor for Ford 351W V-8 engines is ready to run right out-of-the-box and are the perfect upgrade for your ignition system. They’re ideal for replacing or upgrading from a points triggered distributor. They feature precision machining for a perfect fit along with a simple three wire hook up for an easy installation with no need to run an external ignition control box. The centerless ground shaft utilizes an upper sealed roller bearing with an extra long lower bronze Oil-Lite bushing for smooth operation. The high output magnetic pickup and large paddle wheel reluctor deliver a strong trigger signal at high RPM for maximum performance. All of these features allow Max-Fire distributors to provide unrivaled voltage to the coil, ensuring that you’re getting maximum performance from your engine. We recommend a new Max-Fire coil for maximum voltage output, ensuring you get the most from your high performance engine at higher RPM’s. Each distributor includes a cap, rotor, retainer and mechanical advance curve kit. FEATURES AND BENEFITS: – CNC machined from 6061-T6 aluminum with O-ring grooves for use in a fully machined engine block – Cap and rotor are molded in high quality 30% glass filled polyester for durability and carbon tracking resistance – Features brass contacts and a stainless steel rotor spring for maximum conductivity – Hardened iron drive gear ensures long service life – Fully adjustable mechanical and vacuum advance for increased mileage potential
Edelbrock part #22758 Max-Fire distributor for Ford 351W V-8 engines is ready to run right out-of-the-box and are the perfect upgrade for your ignition system.
Ford:Small-Block Windsor:351 (5.8L)- Adj. Mechanical And Vacuum Adv. For Increased Mileage Potential
-
Edelbrock part #29365 Victor FE EFI intake manifold is designed for high performance 390-406-410-427-428 c.i.d. Ford FE engines. The single-plane design provides race-winning power for many types of competition. Carb flange height is equal to the Ford high-riser manifold #C4AE-9424-G to fit under 427 Cobra hoods. Runners have plenty of material for port matching to low- or medium-riser style heads. Machined rear breather flange is included with unmachined nitrous bosses and front oil fill tube boss. Will not fit 427 high-riser and tunnel-port heads. Match with our FE heads.
Edelbrock Victor FE EFI Intake Manifold for 1958-1976 Ford 332-428 FE Big-Block V-8
Ford:FE:332 (5.4L)/352 (5.8L)/360 (5.9L)/390 (6.4L)/406 (6.6L)/410 (6.7L)/427 (7.0L)/428 (7.0L)- Machined Rear Breather Boss Is Included
-
Edelbrock part #2098 Performer RPM Top End Kit is designed for 1957-86 Small-Block Chevy 350 V-8 engines. This Top End Kit produced 410 HP & 408 TQ on a 350 c.i.d engine with 9.5:1 compression. The kit delivers improved performance in street applications from 1,500 to 6,500 rpm range. This kit includes RPM Air-Gap intake manifold, RPM heads, pushrods, RPM camshaft, timing chain, complete bolt kits and an Edelbrock gasket set. To get great performance out of any engine, all of the components must work together. For over 30 years, the Edelbrock Total Power Package system has solved the parts matching puzzle for many street performance enthusiasts. With the introduction our Power Package Top End Kits, now you can get the best Edelbrock performance in-one-box, under one part number with “no guesswork” involved.
Edelbrock part #2098 Performer RPM Top End Kit is designed for 1957-86 Small-Block Chevy 350 V-8 engines. This Top End Kit produced 410 HP & 408 TQ on a 350 c.i.d engine with 9.5:1 compression.
Chevrolet:Small-Block Gen I:327 (5.4L)/350 (5.7L)/400 (6.6L)- Includes Almost Everything You Need
-
Edelbrock part #2099 Performer RPM Top End Kit is designed for 1957-86 Small-Block Chevy 327-350 V-8 engines. This Top End Kit produced 435 HP & 435 TQ on a 350 c.i.d engine with 9.5:1 compression. The kit delivers improved performance in street applications from 1,500 to 6,500 rpm range. The kit includes RPM Air-Gap intake manifold, E-Tec 170 cylinder heads, pushrods, Rollin’ Thunder Hydraulic Roller camshaft, timing chain, complete bolt kits and an Edelbrock gasket set. To get great performance out of any engine, all of the components must work together. For over 30 years, the Edelbrock Total Power Package system has solved the parts matching puzzle for many street performance enthusiasts. With the introduction our Power Package Top End Kits, now you can get the best Edelbrock performance in-one-box, under one part number with “no guesswork” involved.
Edelbrock part #2099 Performer RPM Top End Kit is designed for 1957-86 Small-Block Chevy 327-350 V-8 engines. This Top End Kit produced 435 HP & 435 TQ on a 350 c.i.d engine with 9.5:1 compression.
Chevrolet:Small-Block Gen I:327 (5.4L)/350 (5.7L)/400 (6.6L)- Includes Almost Everything You Need
-
Edelbrock part #3884 Performer 5.8L EFI intake manifold base is designed for 1988-96 Ford 5.8L, EFI, truck engines. This intake manifold base manifold is CNC port matched to upper manifold for maximum performance.
Edelbrock Performer 5.8L Base Intake Manifold Small Block Ford
Ford:Small-Block Windsor:351 (5.8L)- For Swaps Will Need Upper PN[3822] or PN[7125]
Showing 24529–24540 of 62048 results