Shop

Edelbrock part #7524 Dual-Quad HEMI intake manifold is intended for use with Mopar Gen II (1964-71) 426-572 HEMI engines operating in the 2,500 to 6,500+ range. This new intake manifold is a single-plane Air-Gap design with a dual square-bore 4150 style carburetor pad. Carburetor spacing and height are the same as Mopar Performance dual-quad #P5153737, making it a direct bolt-on to all vehicles with a shaker hood. They also retain the same carburetor linkage location from the factory. The Dual-Quad HEMI is compatible with factory style cylinder heads, but optimized for use with Edelbrock Victor Jr. HEMI cylinder heads. Requires Edelbrock Coil Bracket #8079 for use with OE style coils.
Edelbrock Dual-Quad Chrysler Gen II 426-572 HEMI Carbureted Intake Manifold
Chrysler:Gen II HEMI:426 (7.0L)/572 (9.4L)

• Compatible With Factory Cylinder Heads

Edelbrock part #75245 Dual-Quad HEMI EFI intake manifold is intended for use with Mopar Gen II (1964-71) 426-572 HEMI engines operating in the 2,500 to 6,500+ range. This new intake manifold is a single-plane Air-Gap design with a dual square-bore 4150 style throttle body pad. Throttle body spacing and height are the same as Mopar Performance dual-quad #P5153737, making it a direct bolt-on to all vehicles with a shaker hood. The Dual-Quad HEMI is compatible with factory style cylinder heads, but optimized for use with Edelbrock Victor Jr. HEMI cylinder heads. Requires Edelbrock Coil Bracket #8079 for use with OE style coils.
Edelbrock Dual-Quad Chrysler Gen II 426-572 HEMI EFI Intake Manifold
Chrysler:Gen II HEMI:426 (7.0L)/572 (9.4L)

• Compatible With Factory Cylinder Heads

Edelbrock part #50665 Victor 460 EFI intake manifold is based on our popular Torker II #5066 for 429/460 c.i.d. Ford V8 applications. It has cast and vertically machined fuel injector bosses for proper fuel injector placement. It is also drilled to accept Edelbrock Fuel Rail kit #3645 and support brackets, for easy attachment. Designed to accept standard flange throttle bodies. This manifold not equipped with EGR. Will not fit 1988-later models or 429 Cobra-Jets.
Edelbrock Victor 460 EFI Intake Manifold for Ford 429/460 Big-Block V8
Ford:Big-Block:429 (7.0L )/460 (7.5L)

• Designed To Accept Standard Flange Throttle Bodies

Edelbrock part #2828 Glidden Victor 351W intake manifold is developed in conjunction with noted Ford drag racer Billy Glidden, this manifold is a larger version of our popular Super Victor 351W. Featuring a 4500 series carb pad, it is intended for high rpm and large displacement Windsor headed small-block Fords with a 9.5″ deck height. The runner area has been enlarged to 3.6 square inches and the plenum has been increased to produce more high rpm power. To maintain optimum runner shape and location, the front water cross-over has been eliminated, but water fittings have been provided on the intake flange for external plumbing of a thermostat if desired. The carburetor pad height on this manifold is only 0.620″ taller than the #2924, making it ideal for single-carb all-out drag racing vehicles.
Edelbrock Gidden Victor 351W Intake Manifold for Small-Block Ford 351-427 Windsor V8 is Designed to fit Windsor Cylinder Heads on a 9.5″ Deck Block for Large Cubic Inch & High Horsepower Applications. Accepts 4500-Series Carburetor. Non-EGR
Ford:Small-Block Windsor:351 (5.8L)

• Carburetor Mounting Flange For 4500-Series Carb

Edelbrock part #1103 Slingshot intake manifold for 1938-48 engines is a reproduction of the original intake manifold designed by Vic Edelbrock Sr. in 1938. The Slingshot is a real show stopper and even includes stainless acorn nuts for mounting the two halves. Match with our block letter heads for a classic look. Includes assembly hardware and gasket #8700. Unlike other flathead manifolds we offer, the Slingshot will allow the user to retain a stock generator in the stock location.
Edelbrock Slingshot Intake Manifold for 1938 to 1948 Ford/Mercury Flathead V8, Includes a Main Runner Casting and a Y-shaped Carburetor Stand Drilled for 3-bolt Style Carbs on 4.75″ Spacing.
Ford:Flathead:221 (3.6L)/239 (3.9L);Mercury:Flathead:221 (3.6L)/239 (3.9L)

• Assembly Hardware and Gasket Are Included

Edelbrock part #1109 Triple Deuce intake manifold is a reproduction of the vintage Edelbrock manifold #SU 349 allow the use of three 2-barrel carburetors on 1949-1953 Ford Flathead engines. #1109 features front road draft and 1-3/8″ diameter oil fill bosses and a raised fuel pump boss. The Edelbrock Triple Deuce #1109 intake manifold accepts, Stromberg 3-bolt (97 type), Holley 3-bolt and Demon 98 carburetors.
Edelbrock Triple Deuce Intake Manifold for 1949 to 1953 Ford/Mercury Flathead V8 allows the use of Three, 3-bolt / 2-Barrel Carburetors on a Late Flathead Engines. Features added front oil fill, road draft bosses, & raised fuel pump boss.
Ford:Flathead:239 (3.6L)/255 (4.2L);Mercury:Flathead:239 (3.6L)/255 (4.2L)

• Features A Raised Fuel Pump Boss

Edelbrock part #7505 RPM Air-Gap Dual-Quad FE #7505 intake manifold is designed for 1960-later high-performance’s street 390-406-410-427-428 c.i.d. Ford FE engines with low/medium rise or Edelbrock Performer RPM FE heads #60059 or #60069. The manifold carb pad is setup to fit Edelbrock carburetors only, will not work with other square flange carburetors. In Dyno tests on a 390 with Performer RPM heads #60069, Performer RPM camshaft #7106 Thunder Series AVS #1803 and #1804 carburetors, it made 452 hp and 428 ft-lbs. torque. Will not fit 427 Ford Hi-Riser and Tunnel Port engines. Has machined boss for a breather flange at rear.
Edelbrock RPM Air-Gap Dual-Quad FE Intake Manifold for 1958-1976 Ford 332-428 FE Big-Block V-8
Ford:FE:390 (6.4L)-428 (7.0L)

• Dual-Quad Power And Nostalgic Looks

Edelbrock part #75613 RPM Air-Gap 2-O intake manifold is designed for street 396-502 c.i.d. Chevy V8’s with large oval-port cylinder heads (1975 and earlier) or Edelbrock Performer/Performer RPM heads. The RPM Air-Gap incorporates the same race-winning technology that’s been used on our Victor Series competition intakes for decades. The Air-Gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Includes rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all late model alternator and A/C brackets for the street. For square bore carburetors only. Will not fit under stock hood of Corvette, 1964-67 Chevelle or 1967-81 Camaro. No provision for exhaust heated chokes and no exhaust crossover. This manifold offers a durable black power coated finish for long lasting protection and a distinctive look.
MANIFOLD; 1966-00 BB CHEVY 396-454; OVAL PORT; RPM AIR-GAP; BLACK
Chevrolet:Big-Block:396 (6.5L)-502 (8.2L)

• Chevy Big Block 396-502 w/Oval Ports

Edelbrock part #21613 Performer 2-O intake manifold is designed for street 396-502 c.i.d. big-block Chevy V8’s using general duty oval-port cylinder heads. Will not fit under hood of Corvette without hood modifications. Will not fit “tall block” V8’s. May be used with OEM or aftermarket carbs. This manifold offers a durable black power coated finish for long lasting protection and a distinctive look.
Edelbrock Performer Intake Manifold For Chevrolet 396-502 Big-Block V8
Chevrolet:Big-Block Mark IV:396 (6.6L)/402 (6.6L)/427 (7.0L)/454 (7.4L)/502 (8.2L)

• Use Choke Rod PN[9179] for Stock Carburetor

Edelbrock part #27033 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. This Performer EPS intake manifold combines a modern runner design with a front mounted oil fill tube for those who want the vintage look of our Classic valve covers with no breathers. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as #4803. This intake manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that’s “tuned” for peak torque at 3500 rpm on a 350-inch engine and it’s ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer intake manifold #21011 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft-lbs. of torque for more performance where you need it most. This manifold offers a durable black power coated finish for long lasting protection and a distinctive look.
Edelbrock Performer EPS Intake Manifold With Oil Fill Tube For Chevrolet 262-400 Small-Block V8
Chevrolet:Small-Block Gen I:265 (4.3L)/267 (4.4L)/283 (4.6L)/302 (4.9L)/305 (5.0L)/307 (5.0L)/327 (5.4L)/350 (5.7L)/400 (6.6L)

• Incl. Oil Fill Tube And Matching Push-In Breather

Edelbrock part #2604 Performer Air-Gap intake manifold is designed for 1987-95 cast iron heads with canted center bolt holes small-block Chevys. This design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. High-velocity runners deliver excellent throttle response throughout the power band. The great looks of the Performer Air-Gap along with the solid idle to 5500 rpm performance makes this an ideal choice for street rods and street machines. Fits spread-bore or square-bore carburetors. Will not fit under stock Corvette hood.
Edelbrock Performer Air-Gap Intake Manifold for 1987-95 262-400 Small-Block Chevrolet V8’s with OEM Cylinder Heads. Work with either a Q-Jet or a 4150-Style Square-Bore Carburetor. Non-EGR.
Chevrolet:Small-Block Gen I:305 (5.0L)/350 (5.7L)

• Ideal for Street Rods and Street Machines