Shop

You finally have your 2020-2025 BMW G20 3-Series equipped with the Turbo B58 and Turbo Hybrid B58 engine and now the next logical step in your search for power gains is with Injen Technology. The EVO1108 is specifically designed for a drop-in fit in your BMW, including the seamless fitment into the factory air scoop. This easy to install performance cold air intake system allows that hungry Turbo engine to breathe deeper and unleash that additional performance that you’ve been craving. It truly is a win on all levels.
EVOLUTION Cold Air Intake System, Part No. EVO1108, 2020-2025 BMW M240i/M340i/M440i L6-3.0L Turbo/L6-3.0L Turbo Hybrid

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Intake scoop integration is designed to capture the largest amount of cool air for max performance
• Simple drop-in installation can normally be completed within 20 minutes
• Air Filter attaches to the airbox using our patented TwistLock method
• Box seamlessly adapts to the OE inlet scoop without modification
• Fully serviceable 5.00″ I.D. Injen SuperNano-Web dry air filter
• Manufactured from high-strength XLPE Roto-Molded Polyethylene
• Dynamic under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 13 hp and 11 lb-ft. of torque
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1093-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA

Your search for the best performing cold air intake that also protects your valuable 2020-2024 Ford F-Series Super Duty is over. You just found the Injen EVO9007 that is specifically engineered for the 2020-2024 Ford Super Duty trucks equipped with the 6.7L Power Stroke diesel engine. We’ve taken every ounce of our 20+ years of experience to create the most versatile kit on the market today, without complicating the installation process. With an incredible 63 additional lb-ft. of torque at the pedal, you can be sure that your truck is more than equipped to tackle towing just about any load, all while retaining factory fuel trims and A/F ratios to prevent damage to your expensive motor.
EVOLUTION Cold Air Intake System, Part No. EVO9007, 2020-2024 Ford Diesel Trucks V8-6.7L Powerstroke.

• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Massive intake tube that tapers down from 5in OD to increase airflow velocity at the turbo inlet
• Works seamlessly with our hot and cold side charge pipe system P/N SES9004ICP or SES9004ICPWB
• Includes removable Urethane Plugs for heavily tuned trucks that require additional airflow
• Also available as a kit with our 8-Layer Oiled Air Filter: Intake system P/N EVO9007C
• This intake is CARB approved under EO# D-476-13 for model years 2020-2022.
• No Tune Required – Designed to work seamless with the stock calibration
• Intake tube features Injen’s patented internal MegaRam (MR) Technology
• Durable XLPE Roto-Molded Polyethylene tube and filter housing
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 28 hp and 63 lb.-ft. of torque
• Utilizes our patented Twist-Lock Filter attachment system
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• 2023-2024 models have not yet received CARB approval
• Reinforced automotive grade silicone couplers
• Injen Technology Limited Lifetime Warranty
• Replacement air filter # X-1116-BB
• Made in Pomona California, USA

Your search for the best performing cold air intake that also protects your valuable 2020-2024 Ford F-Series Super Duty is over. You just found the Injen EVO9007C that is specifically engineered for the 2020-2024 Ford Super Duty trucks equipped with the 6.7L Power Stroke diesel engine. We’ve taken every ounce of our 20+ years of experience to create the most versatile kit on the market today, without complicating the installation process. With an incredible 63 additional lb-ft. of torque at the pedal, you can be sure that your truck is more than equipped to tackle towing just about any load, all while retaining factory fuel trims and A/F ratios to prevent damage to your expensive motor.
EVOLUTION Cold Air Intake System, Part No. EVO9007C, 2020-2024 Ford Diesel Trucks V8-6.7L Powerstroke.

• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Massive intake tube that tapers down from 5in OD to increase airflow velocity at the turbo inlet
• Works seamlessly with our hot and cold side charge pipe system P/N SES9004ICP or SES9004ICPWB
• Includes removable Urethane Plugs for heavily tuned trucks that require additional airflow
• Also available as a kit with our Dry Air Filter: Intake system P/N EVO9007
• This intake is CARB approved under EO# D-476-13 for model years 2020-2022.
• No Tune Required – Designed to work seamless with the stock calibration
• Intake tube features Injen’s patented internal MegaRam (MR) Technology
• Durable XLPE Roto-Molded Polyethylene tube and filter housing
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 28 hp and 63 lb.-ft. of torque
• Utilizes our patented Twist-Lock Filter attachment system
• Optional Injen air filter cleaning kit part number X-1030
• Stainless steel band clamps with inner protective liner
• 2023-2024 models have not yet received CARB approval
• Reinforced automotive grade silicone couplers
• Injen Technology Limited Lifetime Warranty
• Replacement air filter # X-1116-BR
• Made in Pomona California, USA

You already purchased the sporty 2020-2024 Polaris Slingshot and now you’re hunting for an intake system that’ll give you the sound you crave, the power you demand, and the under hood looks you desire. Look no further because Injen has exciting news for you! The PS7001 performance cold air intake from Injen Technology will allow that L4-2.0L engine found in your Slingshot to breathe deeper and provide the added performance that you’ve been craving. Injen Technology has gone steps further than the competition in this design ? for example – by designing a full intake system that keeps the IAT sensor inside the airflow path for far superior fuel trim calibrations during normal driving. This isn’t just some filter on the end of the stock intake tube like the competition has brought to market; the Injen intake is a fully engineered system that is designed and manufactured by the same people that gave you the best-selling intake for the Gen1 Slingshot!
PS Cold Air Intake System, Part No. PS7001WR, 2020-2024 Polaris Slingshot L4-2.0L

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• IAT sensor remains in the intake tract and not relocated to a heatshield like the competition
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 11 hp and 9 lb-ft. of torque
• Mandrel-bent 4.0in O.D. 6061-T6 aluminum intake tubing
• Fully serviceable Injen SuperNano-Web dry air filter
• Provides power gains while maintaining A/F ratios
• Replacement air filter part number X-1127-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Optional Hydroshield part number 1077BLK
• Available in three amazing finishes:
• Made in Pomona California, USA
• No additional tuning required
• Short Ram Air Intake Design
• PS7001P (Polished Finish)
• PS7001WB (Wrinkle Black)
• PS7001WR (Wrinkle Red)

Add easy horsepower to your ride with the Injen Technology IS Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!
Short Ram Air Intake System; Incl. Tubing/Filter/Hardware/Instruction; HP Gains +12.1 HP/Torque Gains +9.8 ft. lbs.; Polished;
Mini 2000-06 Mini Cooper N/A Excludes turbo models

• Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Dyno Proven gains of up to 12 hp and 10 lb-ft. of torque
• Available with a polished or Black powder coated finish
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1035BLK or 1035RED
• Replacement air filter part number X-1020-BB
• T6-6061 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• CARB EO for 2002-2005 model years only
• Increased Torque up to 9.8 ft./lbs.
• Made in Pomona, California USA
• CARB EO #: D-476-5

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Cold Air Intake System; Incl. Tubing/Filter/Hardware/Instruction; HP Gains +6.3 HP/Torque Gains 5.6 ft. lbs.; Black;
Converts to Short Ram
Nissan 2005-2006 Sentra 1.8L 4 Cyl.

• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 6 hp and 6 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1035BLK or 1035RED
• Features Injen’s patented MegaRam (MR) Technology
• Provides power gains while maintaining A/F ratios
• Replacement air filter part number X-1017-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque Up To 5.6 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Cold Air Intake Design
• CARB EO #: D-476-5

Add some easy horsepower to your Ride with this RD Series Performance cold air intake (CAI) from Injen Technology! The engineers at Injen have spent considerable amounts of time designing, testing, and perfecting this CAI to produce some serious bolt-on power while also providing amazing engine bay aesthetics. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. , , The soul of this intake is found within our mandrel-bent 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. This tube reaches into the depths of the engine bay to collect the coolest and densest air available. Additionally, this RD intake also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen RD performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? Injen also offers this intake system in a polished or a powder-coated Black finish. To top it all off, this RD CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!,
Cold Air Intake System; Incl. Tubing/Filter/Hardware/Instruction; HP Gains +12.3 HP/Torque Gains +8.0 ft. lbs.; Polished;
Toyota 2004-06 Matrix XRS 1.8L 4 cyl. VVTL-I

• Smooth mandrel-bent I take piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Dyno Proven gains of up to 12 hp and 8 lb-ft. of torque
• Available with a polished or Black powder coated finish
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1035BLK or 1035RED
• Replacement air filter part number X-1010-BB
• 6061-T6 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque Up To 8 ft./lbs.
• Made in Pomona, California USA
• CARB EO #: D-476-4

Add easy horsepower to your ride with the Injen Technology IS Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!
Short Ram Air Intake System; Incl. Tubing/Filter/Hardware/Instruction; HP Gains +6.0 HP; Black;
Scion 04-06 xA; xB no CARB 05-06

• Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• CARB EO for 2004 model years only. All other years are not CARB exempt.
• Available with a polished or Black powder coated finish
• Dyno Proven gains of up to 6 hp and 5 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1033BLK or 1033RED
• Replacement air filter part number X-1012-BB
• T6-6061 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA
• Increased HP Up To 10
• CARB EO #: D-476-4

Add easy horsepower to your ride with the Injen Technology IS Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!
Short Ram Air Intake System; Incl. Tubing/Filter/Hardware/Instruction; HP Gains +5.6 HP/Torque Gains +5.2 ft. lbs.; Black;
Scion 04-06 xB Only no CARB 05-06

• Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• CARB EO for 2004 model years only. All other years are not CARB exempt.
• Available with a polished or Black powder coated finish
• Dyno Proven gains of up to 6 hp and 5 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1033BLK or 1033RED
• Replacement air filter part number X-1013-BB
• T6-6061 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA
• SuperNano-Web Dry Filter
• CARB EO #: D-476-4

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Cold Air Intake System; Incl. Tubing/Filter/Hardware/Instruction; w/MR Technology; HP Gains +14.0 HP/Torque Gains +13.0 ft. lbs.; Black;
Infiniti 2006-08 M35 3.5 V6 Tuned cold air intake system w/MR Technology and nano-fiber dry filter

• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 14 hp and 13 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1034BLK or 1034RED
• 2-piece design easily converts to short ram system
• Features Injen’s patented MegaRam (MR) Technology
• Provides power gains while maintaining A/F ratios
• Replacement air filter part number X-1015-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque Up To 13 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Cold Air Intake Design
• CARB EO #: D-476-5