-
Edelbrock part #75811 RPM Air-Gap 351W intake manifold is designed for street and high performance 351-427 c.i.d. 351W Ford V8’s. This RPM Air-Gap incorporates the same race-winning design that’s been used on our Victor Series competition intakes for decades. The Air-Gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Larger cross sectional area and a taller carb flange than #7181 for compatibility with large displacement, stroker 351W based engines. Includes bosses for nitrous and rear water crossover. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com. This manifold offers a polished finish for a brilliant shine and classic look.
Edelbrock Performer RPM Air-Gap Intake Manifold for 351W Ford Small Block Windsor engines
Ford:Small-Block Windsor:351W (5.8L)-427 (7.0L)- Compatibility w/Large Displacement 351W Based Eng.
-
Edelbrock part #75011 RPM Air-Gap RPM intake manifold is designed for 1955-86 262-400 c.i.d. Chevrolet V8’s. The award-winning RPM Air-Gap intake manifold incorporates the same race-winning technology that’s used on our Victor Series competition intakes. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Edelbrock’s Performer RPM gives you the ultimate in street high-performance. Accepts all 1976 and later alternator and A/C brackets for the street. No provision for exhaust- heated chokes and no exhaust crossover. Not for 1987 and later cast iron heads and will not fit under stock Corvette hood. This manifold offers a polished finish for a brilliant shine and classic look.
Edelbrock Performer RPM AIR-GAP Intake Manifold For Chevrolet 262-400 Small-Block V8
Chevrolet:Small-Block Gen I:262 (4.3L)-400 (6.6L)- Larger Plenum and Runners Maximizes Other Upgrades
-
Edelbrock part #71101 Street Tunnel Ram intake manifold is designed for 302-327-350-400 c.i.d. small-block Chevy V8’s operating below 7500 rpm where low-end torque is not a prime factor. Great for engines with slightly modified heads. Will not fit 1987 and later cast iron heads. Use with cam kit #5002 for low-end torque or cam kit #7102 for top-end power. This manifold offers a polished finish for a brilliant shine and classic look.
Edelbrock Street Tunnel Ram Manifold For Chevrolet 302-400 Small-Block V8
Chevrolet:Small-Block Gen I:302 (4.9L)/327 (5.4L)/350 (5.7L)/400 (6.6L)- Dual-Quad Design
-
Edelbrock part #29021 Victor Jr. 454-R intake manifold is designed for competition 396-502 big-block Chevys with rectangular-port heads. This intake is designed to optimize the flow characteristics of an 850 cfm standard flange carb. Features include extended runner dividers, smaller plenum chambers and unique runner design for better 60 foot times and max power from 3500 to 7500 rpm. This manifold is especially suited to 502 c.i.d. and smaller competition engines. The Victor Jr. 454-R will fit Edelbrock Victor race heads #77609 and Victor 24-degree #77409, #77459, #77429, #77479 and #77485. This manifold offers a polished finish for a brilliant shine and classic look.
Edelbrock Victor Jr. 454-R Intake Manifold For Chevrolet 396-502 Big-Block V8
Chevrolet:Big-Block Mark IV:396 (6.6L)/402 (6.6L)/427 (7.0L)/454 (7.4L)/502 (8.2L)- Ideal for 502 cid and Smaller Competition Engines
-
Edelbrock part #7156-BP Performer RPM Pontiac intake manifold is designed for 1965-79 street 326-455 c.i.d. Pontiac V8’s (except Ram Air V and 265/301 V8’s). The PN 7156-BP version comes with a beautiful reflective Black Plasma finish that is durable and easy to maintain. The Plasma finishes are applied by a fully automated 7 stage prewash and 4 stage finish. A durable clear powder coat finises the process. Recommended for high-performance street, strip and marine. Has clearance for HEI distributor. Will not fit under Trans Am Shaker hood without modifications
Edelbrock Performer RPM Pontiac Intake Manifold for Pontiac 326-455 V8 with a beautiful Black Plasma finish. -
Edelbrock part #7156-CP Performer RPM Pontiac intake manifold is designed for 1965-79 street 326-455 c.i.d. Pontiac V8’s (except Ram Air V and 265/301 V8’s). The PN 7156-CP version comes with a brilliant Chrome plasma finish that is durable and easy to maintain.Recommended for high-performance street, strip and marine. Has clearance for HEI distributor. Will not fit under Trans Am Shaker hood without modifications
Edelbrock Performer RPM Pontiac Intake Manifold for Pontiac 326-455 V8 with a beautiful Chrome Plasma finish. -
Edelbrock part #2091 Performer RPM Top End Kit is designed for 1981 & earlier Ford 289-302 engines. This Top End Kit produced 367 HP & 340 TQ on a 302 c.i.d engine with 9.5:1 compression. The kit delivers improved performance in street applications from 1,500 to 6,500 rpm range. This kit includes RPM Air-Gap intake manifold, Performer RPM cylinder heads, pushrods, hydraulic cam and lifters, timing chain complete bolt kits and an Edelbrock gasket set. To get great performance out of any engine, all of the components must work together. For over 30 years, the Edelbrock Total Power Package system has solved the parts matching puzzle for many street performance enthusiasts. With the introduction our Power Package Top End Kits, now you can get the best Edelbrock performance in-one-box, under one part number with “no guesswork” involved.
Edelbrock part #2091 Performer RPM Top End Kit is designed for 1981 & earlier Ford 289-302 engines. This Top End Kit produced 367 HP & 340 TQ on a 302 c.i.d engine with 9.5:1 compression.
Ford:Small-Block Windsor:289 (4.7L)/302 (5.0L)- Includes Almost Everything You Need
-
Edelbrock part #2092 Performer RPM Top End Kit is designed for 1969-95 Small-Block Ford 351-W V-8 engines. This Top End Kit produced 400 HP & 412 TQ on a 351-W c.i.d engine with 9.5:1 compression. The kit delivers improved performance in street applications from 1,500 to 6,500 rpm range. The kit includes RPM Air-Gap intake manifold, Performer RPM cylinder heads, pushrods, hydraulic cam and lifters, timing chain complete bolt kits and an Edelbrock gasket set. To get great performance out of any engine, all of the components must work together. For over 30 years, the Edelbrock Total Power Package system has solved the parts matching puzzle for many street performance enthusiasts. With the introduction our Power Package Top End Kits, now you can get the best Edelbrock performance in-one-box, under one part number with “no guesswork” involved.
Edelbrock part #2092 Performer RPM Top End Kit is designed for 1969-95 Small-Block Ford 351-W V-8 engines. This Top End Kit produced 400 HP & 412 TQ on a 351-W c.i.d engine with 9.5:1 compression.
Ford:Small-Block Windsor:351 (5.8L)- Includes Almost Everything You Need
-
Edelbrock part #2096 Performer RPM Top End Kit is designed for 1987 & later Small-Block Chevy 383 V-8 engines. This Top End Kit produced 460 HP & 460 TQ on a 383 c.i.d engine with 9.5:1 compression. The kit delivers improved performance in street applications from 1,500 to 6,500 rpm range. The Edelbrock #2096 kit includes RPM Air-Gap intake manifold, E-Tec 200 cylinder heads, pushrods and Rollin’ Thunder Hydraulic Roller camshaft, timing chain, complete bolt kits and an Edelbrock gasket set. To get great performance out of any engine, all of the components must work together. For over 30 years, the Edelbrock Total Power Package system has solved the parts matching puzzle for many street performance enthusiasts. With the introduction our Power Package Top End Kits, now you can get the best Edelbrock performance in-one-box, under one part number with “no guesswork” involved.
Edelbrock part #2096 Performer RPM Top End Kit is designed for 1987 & later Small-Block Chevy 383 V-8 engines. This Top End Kit produced 460 HP & 460 TQ on a 383 c.i.d engine with 9.5:1 compression.
Chevrolet:Small-Block Gen I:383 (6.3L)- Includes Almost Everything You Need
-
Edelbrock part #2094 Performer RPM Top End Kit is designed for 1996 & later Big-Block Chevy 502 V-8 engines. This Top End Kit produced 611 HP & 573 TQ on a 502 c.i.d engine with 9.6:1 compression. The kit delivers improved performance in street applications from 1,500 to 6,500 rpm range. The kit includes Victor Jr. intake manifold, Victor Jr. cylinder heads, pushrods and Rollin’ Thunder Hydraulic Roller camshaft, timing chain, complete bolt kits and an Edelbrock gasket set. To get great performance out of any engine, all of the components must work together. For over 30 years, the Edelbrock Total Power Package system has solved the parts matching puzzle for many street performance enthusiasts. With the introduction our Power Package Top End Kits, now you can get the best Edelbrock performance in-one-box, under one part number with “no guesswork” involved.
Edelbrock part #2094 Performer RPM Top End Kit is designed for 1996 & later Big-Block Chevy 502 V-8 engines. This Top End Kit produced 611 HP & 573 TQ on a 502 c.i.d engine with 9.6:1 compression.
Chevrolet:Big-Block Gen V:502 (8.2L);Chevrolet:Big-Block Gen VI:502 (8.2L)- Includes Almost Everything You Need
-
Edelbrock part #2086 Performer RPM Top End Kit is designed for 1968-79 Big-Block Chrysler 383 V-8 engines. This Top End Kit produced 421 HP & 417 TQ on a 383 c.i.d engine. The kit delivers improved performance in street applications from 1,500 to 6,500 rpm range. The kit includes RPM Air-Gap intake manifold, Performer RPM cylinder heads, hydraulic cam and lifters, timing chain complete bolt kits and an Edelbrock gasket set. To get great performance out of any engine, all of the components must work together. For over 30 years, the Edelbrock Total Power Package system has solved the parts matching puzzle for many street performance enthusiasts. With the introduction our Power Package Top End Kits, now you can get the best Edelbrock performance in-one-box, under one part number with “no guesswork” involved.
Edelbrock part #2086 Performer RPM Top End Kit is designed for 1968-79 Big-Block Chrysler 383 V-8 engines. This Top End Kit produced 421 HP & 417 TQ on a 383 c.i.d engine with 9.5:1 compression.
Chrysler:Big-Block B-Series:361 (5.9L)/383 (6.3L)/400 (6.6L)- Includes Almost Everything You Need
-
Edelbrock part #2052 Performer RPM Top End Kit is designed for Gen II Chrysler 426-572 V-8 Hemi engines. This Top End Kit produced 705 HP & 620 TQ on a 528 c.i.d with 10:1 compression. The kit delivers improved performance in street applications in the 1,500 to 6,500 rpm range. This kit includes RPM Air-Gap intake manifold, Performer RPM cylinder heads, hydraulic roller cam and lifters, timing chain complete bolt kits and an Edelbrock gasket set. To get great performance out of any engine, all of the components must work together. For over 30 years, the Edelbrock Total Power Package system has solved the parts matching puzzle for many street performance enthusiasts. With the introduction our Power Package Top End Kits, now you can get the best Edelbrock performance in-one-box, under one part number with “no guesswork” involved.
Edelbrock part #2052 Performer RPM Top End Kit is designed for Gen II Chrysler 426-572 V-8 Hemi engines. This Top End Kit produced 705 HP & 620 TQ on a 528 c.i.d with 10:1 compression.
Chrysler:Gen II HEMI:426 (7.0L)/572 (9.4L)- Includes Almost Everything You Need
Showing 24049–24060 of 58461 results