Shop

Edelbrock part #2901 Victor Jr. Sportsman 2V intake manifold is a dedicated design for the 2V racer and provides outstanding performance from 3500 to 7000 rpm. The runners are sized especially for 2V racing engines for the ultimate combination of torque and horsepower with better fuel distribution. An extra tall carburetor pad eliminates the need for spacers, and rear water outlets allow for a four corner coolant flow path if desired. It features dual distributor clamp locations, and port exits are sized to match cast iron Chevrolet Bowtie heads. Manifold accept standard restrictor plates and carb adapters. This manifold is a single-plane, high-rise intake designed for maximum race-winning power at higher engine speeds.
Edelbrock Victor Jr. Sportsman 2V 23 Degree Intake Manifold For Chevrolet 262-400 Small-Block V8
Chevrolet:Small-Block Gen I:262 (4.3L)/265 (4.3L)/267 (4.4L)/283 (4.6L)/302 (4.9L)/305 (5.0L)/307 (5.0L)/327 (5.4L)/350 (5.7L)/400 (6.6L)

• Runners Sized to Match Bowtie Heads

Edelbrock part #2921 Victor Jr. 302 intake manifold is designed for Ford 289-302 competition engines using modified stock cast iron or aftermarket Windsor-style cylinder heads such as Edelbrock #60259 and #77169 or equivalent. This intake manifold has bosses for rear water crossover. Port exit size at cylinder head is 1.08″ x 1.90″ with extra material to accommodate a 1.18″ x 2.10″ opening. This Victor Jr. is a single-plane, high-rise intake designed for maximum race-winning power at higher engine speeds.
Edelbrock Victor Jr. 302 Intake Manifold for Ford 289-347 Small-Block V8
Ford:Small-Block Windsor:260 (4.3L)/289 (4.7L)/302 (5.0L)

• Port Exits Can be Opened to 2.10 x 1.18 in.

Edelbrock part #2981 Victor Jr. 351W (9.5″ deck) intake manifold is designed for competition 351 Windsor Ford V8’s from 1969 and later with the following heads: Edelbrock Performer RPM heads #60259, Victor Jr. heads #77169, Victor heads #77219 or similar heads. This intake manifold fits SVO blocks with a 9.5″ deck height. Ideal for both oval track and drag racing engines operating between 3500 and 7500 rpm. Runners have a 2.70 square-inch cross sectional area. The Edelbrock Victor Jr. is a single-plane, high-rise intake designed for maximum race-winning power at higher engine speeds.
Edelbrock Victor Jr. 351W (9.5″ deck) Intake Manifold for Ford 351-427 Small-Block Windsor V8
Ford:Small-Block Windsor:351 (5.8L)

• Runners Have 2.70 Square in. Cross-Sectional Area

Edelbrock part #29085 Victor Jr. LS1 EFI intake manifold accepts a standard square bore throttle body. This compact single-plane intake is capable of supporting up to 650 hp. The Edelbrock Victor Jr. LS1 EFI intake manifold continues the Edelbrock tradition of enhanced engine breathing and balanced cylinder-to-cylinder air/fuel distribution for improved performance. Includes a throttle bracket designed to work with 700-R4, 200-4R and Turbo 350 transmissions. Most applications will require hood modification.
Edelbrock Victor Jr. LS1 EFI Intake Manifold Only For Chevrolet LS Gen III
Chevrolet:Small-Block LC9:325 (5.3L);Chevrolet:Small-Block LH8:325 (5.3L);Chevrolet:Small-Block LMF:325 (5.3L);Chevrolet:Small-Block LMG:325 (5.3L);Chevrolet:Small-Block LY5:325 (5.3L);Chevrolet:Small-Block Gen III LM7:325 (5.3L);Chevrolet:Small-Block Gen

• Use OEM Factory O-Rings for Intake Gasket

Edelbrock part #2838 Victor Jr. Ford 4.6L SOHC intake manifold for Ford 4.6L SOHC Modular engines allows the customer to take any 1999-2004 SOHC Modular 4.6L engine and convert it for use with a carburetor. Timing control module available separately. Not intended for or as a stock replacement intake manifold.
Victor Jr. Intake Manifold for Small-Block Ford 4.6L SOHC Modular Engines is Designed for 4.6L Ford Racing Applications. Not Recommended for Stock Replacement. Electronics Not Included. Accepts 4150-Series Carburetor. Non-EGR.
Ford:Modular 2V:281 (4.6L)

• Includes Electronic Timing Control Module

Edelbrock part #2975 Victor Jr. intake manifold is excellent for many applications from drag to circle track racing. This intake manifold provides maximum performance for engines with standard port location, iron and aluminum cylinder heads. The low-profile of the #2975 works well in applications with minimal hood clearance and where 1″ or 2″ spacers can be used for performance tuning. When carb spacers are not allowed, the #2999 should be used. The Edelbrock Victor Jr. #2975 is a single-plane, high-rise intake designed for maximum race-winning power at higher engine speeds.
Edelbrock Victor Jr. 23 Degree Intake Manifold For Chevrolet 262-400 Small-Block V8
Chevrolet:Small-Block Gen I:262 (4.3L)/265 (4.3L)/267 (4.4L)/283 (4.6L)/302 (4.9L)/305 (5.0L)/307 (5.0L)/327 (5.4L)/350 (5.7L)/400 (6.6L)

• Best for Standard Port Heads

Edelbrock part #2999 Victor Jr. 23 degree Tall intake manifold provides maximum performance for engines with standard port location, iron and aluminum cylinder heads. This versatile manifold is excellent for many applications from high-performance’s street to drag/circle track racing. This Victor Jr. 23 degree tall intake manifold features a 1″ taller carb pad than the Victor Jr. #2975.
Edelbrock Victor Jr. 23 Degree Tall Intake Manifold For Chevrolet 262-400 Small-Block V8
Chevrolet:Small-Block Gen I:262 (4.3L)/265 (4.3L)/267 (4.4L)/283 (4.6L)/302 (4.9L)/305 (5.0L)/307 (5.0L)/327 (5.4L)/350 (5.7L)/400 (6.6L)

• Features 1 in. Taller Carb Pad Than PN[2972]

Edelbrock part #2957 Victor Pontiac intake manifold is designed for 389-455 competition engines using standard flange carburetors. This manifold is ideal for drag racing (Super Stock, Super Gas, Super Comp, Brackets, etc.), marine or any application requiring maximum power up to 7500 rpm. Compatible with standard Pontiac cast iron heads, or use with Edelbrock Performer RPM Pontiac aluminum heads for maximum power. Port exit size at head is 1.08″ x 2.10″ with enough material to open it up to larger port openings.
Edelbrock Victor Pontiac Intake Manifold for 4150 Series Carbs for Pontiac 326-455 V8
Pontiac:-:326 (5.3L)/350 (5.7L)/389 (6.4L)/400 (6.6L)/421 (6.9L)/428 (7.0L)/455 (7.4)

• Accepts Standard Flange Carburetors