Shop

Edelbrock part #7105 Performer RPM FE intake manifold is designed for high-performance’s street 390-406-410-427-428 c.i.d. Ford FE V8’s with standard 390-428 c.i.d., 427 low/medium-rise or Edelbrock Performer RPM FE heads. The dual-plane constant cross-sectional area design builds low and mid- range acceleration while optimized runner paths make exceptional top-end horsepower. Has provision for adding the PCV or breather flange at rear. No exhaust crossover passage.
Edelbrock Performer RPM 390 Intake Manifold for 1958-1976 Ford 332-428 FE Big-Block V-8
Ford:FE:332 (5.4L)/352 (5.8L)/360 (5.9L)/390 (6.4L)/406 (6.6L)/410 (6.7L)/427 (7.0L)/428 (7.0L)

• Edelbrock Total Power Package Maximizes Gains

Edelbrock part #71933 Performer RPM 440 intake manifold is designed for 413-426-440 c.i.d. Chrysler V8’s. The dual-plane design results in excellent low-rpm torque and outstanding high-rpm hp. For high-performance’street/strip applications. This manifold offers a durable black power coated finish for long lasting protection and a distinctive look.
Edelbrock Performer RPM Intake Manifold for Chrysler 413-426-440 Big-Block V8
Chrysler:Big-Block RB Series:413 (6.8L)/426 (7.0L)/440 (7.2L)

• Edelbrock Total Power Package Maximizes Gains

Edelbrock part #7163 Performer RPM 2-R intake manifold is designed for street 396-502 c.i.d. Chevrolet V8’s with high-performance rectangular-port cylinder heads. This dual-plane high-rise manifold offers maximum horsepower with a broad torque curve. No provisions for exhaust heated chokes. Accepts late-model waterneck, air-conditioning, alternator and HEI equipment.
Edelbrock Performer RPM 2-R Intake Manifold for Chevrolet 396-502 Big-Block V8
Chevrolet:Big-Block Mark IV:396 (6.6L)/402 (6.6L)/427 (7.0L)/454 (7.4L)/502 (8.2L)

• Designed for Square Port Heads

Edelbrock part #7166 Performer RPM 460 intake manifold is designed for high-performance’s street 429/460 Ford V8’s with standard or Cobra-Jet cylinder heads. Latest technology in dual-plane design results in excellent low- and mid-range torque and outstanding horsepower on appropriately equipped engines. Will accept square-bore or spread-bore carburetors. Will not fit 1988 and later models. Note: Early Cobra-Jets came with Quadrajets.
Edelbrock Performer RPM 460 Intake Manifold for Ford 429/460 Big-Block V8
Ford:Big-Block:429 (7.0L )/460 (7.5L)

• Edelbrock Total Power Package Maximizes Gains

Edelbrock part #75163 RPM Air-Gap intake manifold is designed for 262-400 c.i.d. Chevy V8’s with 1996 and later Vortec (L31) cast iron or Edelbrock E-Tec aluminum heads. This intake manifold is based on the powerful Performer RPM Vortec #7116. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. An external water bypass boss is machined into the front of the water crossover for use on 1996 and later Vortec production engines. Includes rear water outlets, nitrous bosses, a temp sensor boss that clears all waternecks, two distributor clamp locations and a heater outlet boss that’s angled for proper fit over the valve cover. Accepts 1976 and later alternator and air-conditioning brackets for street installations. For square-bore carbs. No provision for exhaust-heated chokes and no exhaust crossover. Will not fit under stock Corvette hood. This manifold offers a durable black power coated finish for long lasting protection and a distinctive look.
Edelbrock Performer RPM AIR-GAP Vortec Intake Manifold For Chevrolet 262-400 Small-Block V8
Chevrolet:Small-Block Gen I Vortec:262 (4.3L)-400 (6.6L)

• Larger Plenum and Runners Maximizes Other Upgrades

Edelbrock part #7566 RPM Air-Gap 460 intake manifold is designed for street and high performance 429/460+ c.i.d. Ford V8’s with standard or Cobra Jet heads. The RPM Air-Gap 460 incorporates the same race-winning design that’s been used on our Victor Series competition intakes for decades. The Air-Gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. It also features a larger cross sectional area (3.3 square inches) than the Performer RPM 460 manifold #7166 intake manifold for even more power in high performance and large displacement engines. The carb mount flange accepts both square-bore and spread-bore carbs for Cobra Jet applications. Will not fit 1988 and later models. Note: Early Cobra Jets came with Quadrajets.
Edelbrock RPM Air-Gap 460 Intake Manifold for Ford 429/460 Big-Block V8
Ford:Big-Block:429 (7.0L )-460 (7.5L)

• Excellent Throttle Response and Mid-Range Power

Edelbrock part #7525 RPM Air-Gap dual-quad intake manifold is designed for 1955-86 S/B Chevys, this intake stands 1-5/8″ taller than the low-profile C-26 intake and offers performance improvements in the 1500-6500 rpm range. The large runners feature our unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge. Will not fit under stock Corvette hood.
Edelbrock Performer RPM AIR-GAP Dual-Quad Intake Manifold For Chevrolet 262-400 Small-Block V8
Chevrolet:Small-Block Gen I:262 (4.3L)-400 (6.6L)

• Use Progressive Throttle Linkage Kit PN[7094]

Edelbrock part #5409 Performer RPM Dual-Quad intake manifold is designed to fit 1958-1965 Chevrolet 348/409 “W” big-block engines with factory large port or with our Performer RPM W-series heads #60809 or #60819. The manifold deliver performance with Edelbrock Performer Series or Thunder Series AVS dual-quad carburetors, and they accept our dual-quad fuel lines, throttle linkage, and air cleaners. Includes Oil Fill Tube (not installed) and matching push-in Breather. Oil Fill Tube and Breather are also available separately as #4803. Carb center-to-center measurement is 6-7/16″.
Edelbrock Performer RPM Dual-Quad Large Port Intake Manifold for Chevrolet W-Series V-8
GMC:W Big Block:348 (5.7L)/409 (6.7L)

• 1958-1965 Chevrolet 348-409 w/Big Block

The Edelbrock #2025 RPM Dual-Quad manifold and carb kit is designed for 1957-86 Small-Block Chevy applications. A huge hit among street rodders, this Dual-Quad Kits offer the ultimate set-up for anyone who wants the look and the performance of dual-quad carbs. The Edelbrock #2025 includes an Edelbrock RPM or RPM Air-Gap Dual-Quad intake manifold and two 500 cfm Thunder Series AVS carburetors calibrated specifically for dual-quad applications (one manual choke, one electric choke). To make the installation simple, these kits also include our high-tech progressive throttle linkage, Russell fuel inlet, high-quality Edelbrock intake gaskets, intake bolt set and carburetor stud kit. The manifold and Thunder Series carbs are available with a standard satin finish or with our bright EnduraShine chrome-like finish for long lasting show quality looks.
Edelbrock RPM Dual-Quad manifold and carb kit for 1957-86 Small-Block Chevy. With a Manifold and Carb Kit, it’s easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a single box.
Chevrolet:Small-Block Gen I:262 (4.3L)/265 (4.3L)/267 (4.4L)/283 (4.6L)/302 (4.9L)/305 (5.0L)/307 (5.0L)/327 (5.4L)/350 (5.7L)/400 (6.6L)

• Edelbrock Total Power Package Maximizes Gains

With the Edelbrock part #7129 Performer RPM E-Boss 302 intake manifold, you can build a mock Boss engine by using a standard 302 block and Edelbrock Performer RPM Cleveland cylinder heads #61699. For high-performance’s street and competition, our dual-plane design makes outstanding power from 1500 to 6500 rpm. The Cleveland port layout and intake bolt hole pattern fit both 2V and 4V heads. Features include 8.2″ deck height, Windsor end rails, water neck and distributor clearance plus front and rear water bosses. Match with an Edelbrock Performer or Thunder Series AVS carburetor. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.
Edelbrock Performer RPM E-Boss 302 Intake Manifold for 302 Ford Small Block with Cleveland Heads
Ford:Clevor Small-Block:302 (5.0L)

• Cleveland Port Layout And Intake Bolt Hole Pattern