Shop

The Edelbrock Stage II Upgrade Kit part #15882 allows customers using the 1588/15880 supercharger (2011-14 5.0L Mustang) to upgrade to stage 2. The Edelbrock Stage II Upgrade Kit part #15882 includes a 3.25in. supercharger pulley, complete competition air intake system, Gatorback belt, and an updated calibration file. This upgrade is intended for racing applications only and is not legal for use on pollution-controlled vehicles. A properly completed race-only form will need to be signed and submitted by the customer and accepted by Edelbrock to receive the race-only calibration file. A race-only calibration file will need to be modified by the customer for the specific race engine configuration.
The Edelbrock Upgrade kit part #15882 allows customers using the #1588/15880 supercharger (2011-14 5.0L Mustang) to become stage 2.
Ford:Coyote 4V:302 (5.0L)

• Springs Made of Highest Quality Spring Wire

The Edelbrock Supercharger System part #15356 is designed for your 2015 6.4L HEMI Jeep Grand Cherokee SRT. The part #15356 kit makes an excellent amount of horsepower and torque. Featuring a unique design with minimal components makes it possible to fit an Edelbrock supercharger under the stock hood. The core of each system is the Eaton Gen VI R2650 Supercharger rotating assembly with a four-lobe design with 170 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. This supercharger features our DUAL PASS, 3 CORE (DP-3C) intercooler system. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger. For safety, the Edelbrock-supplied program will retain the factory vehicle speed limiter setting.
Edelbrock Supercharger System part #15356 2015 Jeep SRT8 6.4 HEMI V8 R2650
Chrysler:Gen III HEMI:392 (6.4L)

• Available w/Free 3 Year 36000 Mile Powertrain Warranty

Edelbrock Hardware Kit part #15905 includes all parts necessary to install a #1590 or #1591 Edelbrock Supercharger System on a 2010-2013 Corvette equipped with the Grand Sport trim package and a manual transmission. These vehicles have the dry sump oiling system found on the LS7 equipped Z06 Corvette.
Edelbrock kit part #15905 includes all parts necessary to install a 1590 or 1591 Edelbrock system on a 2010-13 Corvette equipped with the Grand Sport trim package & manual transmission. Dry sump
Chevrolet:Small-Block Gen IV LS3:376 (6.2L)

• Manual Transmission Models Only

The Edelbrock Supercharger System part #1538 is designed for your 2009-14 5.7L HEMI Dodge Ram Truck and produces 439 RWHP and 444 RWTQ. The core of each system is the Eaton Gen VI 2300 Supercharger rotating assembly with a four-lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger.
Edelbrock Supercharger System part #1538 Dodge RPM HEMI V8 5.7L 2009-14 1500 Truck
Chrysler:Gen III HEMI:345 (5.7L)

• Little To No Decrease In Fuel Economy

Joining Edelbrock’s expanding line of supercharger systems are the Chevrolet & GMC 2015-2020 SUVs, 2014-2018 full size trucks, & 2019 Silverado LD & Sierra LDT (air box on right side) equipped with a Gen V 5.3L L83 engine (not a L8B hybrid). This is a true bolt-on performance kit that is emissions legal in all 50 states and produces an impressive 482 horsepower with 452 ft-lbs of torque at the rear wheel on 93-octane pump gas! Edelbrock supercharger Kit #15663 for Silverado, Sierra, Suburban, Tahoe and Yukon models equipped with a Gen V 5.3L V8 engine is a complete redesign of the previous kit featuring a manifold that now houses Eaton’s R2650 TVS rotor assembly along with a high-capacity Dual Pass 3-core intercooler system. The new rotors have a 170-degree high-twist lobe design with bigger bearings and beefier timing gears for unparalleled efficiency and OEM-like reliability. Like other superchargers in the Edelbrock line, this system is designed to fit under the stock hood with no cutting or modifications required. A self-contained oiling system keeps maintenance to a minimum with a service interval of 100,000 miles. The significant increase in horsepower and torque comes with minimal loss in fuel economy thanks to the system’s integrated bypass valve that mitigates parasitic power loss during normal driving conditions. This new Edelbrock supercharger kit requires no internal modifications to the engine. For higher power demands, the R2650 supercharger can support 1,000-plus horsepower at the flywheel with the right combination of parts. This kit includes everything required for a complete installation including a set of preformed hoses to simplify the process. A full-color manual provides clear step-by-step instructions for the installer. Comes finished in a durable black powder-coating that blends nicely into the engine compartment. All Edelbrock Supercharger Systems are designed and manufactured in the USA and are covered by a 3-year/36,000-mile warranty.
Edelbrock supercharger Stage 1 Street System part #15663 for 2014-2020 Silverado 1500, Silverado LD, Sierra 1500, Sierra LDT, Suburban, Tahoe, Yukon & Yukon XL applications with a 5.3L L83 & LB8 Gen V engine.

Joining Edelbrock’s expanding line of supercharger systems are the Chevrolet & GMC 2015-2020 SUVs, 2014-2018 full size trucks, & 2019 Silverado LD & Sierra LDT (air box on right side) equipped with a Gen V 5.3L L83 engine (not a L8B hybrid). This is a true bolt-on performance kit that is emissions legal in all 50 states and produces an impressive 482 horsepower with 452 ft-lbs of torque at the rear wheel on 93-octane pump gas! Edelbrock supercharger Kit #156630 for Silverado, Sierra, Suburban, Tahoe and Yukon models equipped with a Gen V 5.3L V8 engine is a complete redesign of the previous kit featuring a manifold that now houses Eaton’s R2650 TVS rotor assembly along with a high-capacity Dual Pass 3-core intercooler system. The new rotors have a 170-degree high-twist lobe design with bigger bearings and beefier timing gears for unparalleled efficiency and OEM-like reliability. Like other superchargers in the Edelbrock line, this system is designed to fit under the stock hood with no cutting or modifications required. A self-contained oiling system keeps maintenance to a minimum with a service interval of 100,000 miles. The significant increase in horsepower and torque comes with minimal loss in fuel economy thanks to the system’s integrated bypass valve that mitigates parasitic power loss during normal driving conditions. This new Edelbrock supercharger kit requires no internal modifications to the engine. For higher power demands, the R2650 supercharger can support 1,000-plus horsepower at the flywheel with the right combination of parts. This kit includes everything required for a complete installation including a set of preformed hoses to simplify the process. A full-color manual provides clear step-by-step instructions for the installer. Comes finished in a durable black powder-coating that blends nicely into the engine compartment. All Edelbrock Supercharger Systems are designed and manufactured in the USA and are covered by a 3-year/36,000-mile warranty.
Edelbrock supercharger Stage 1 Street System w/o Hand-Held Programmer #156630 for 2014-2020 Silverado 1500, Silverado LD, Sierra 1500, Sierra LDT, Suburban, Tahoe, Yukon & Yukon XL applications with a 5.3L L83 & LB4 Gen V engine.

Edelbrock’s performance-proven modular-inlet supercharger system is now available for owners of 2015-2017 Ford Mustangs with the 5.0L Coyote engine. The new Edelbrock supercharger #15838 is a complete bolt-on kit that produces an impressive 690 horsepower with 588 ft-lbs of torque. At the heart of this system is Eaton’s biggest R2650 TVS rotor assembly housed in a new manifold with an integrated high-capacity DP3C (dual-pass, three-core) air-to-water intercooler for lower inlet air temperatures and increased power potential. The 170-degree high-twist lobes, bigger bearings and beefier timing gears ensure maximum reliability with smooth acceleration throughout the powerband. The Edelbrock supercharger for the 5.0L V8 fits under the stock hood with absolutely no cutting or modifications required. And if you’re concerned about the effect on MPG, the increase in power comes with little to no loss in fuel economy thanks to the supercharger’s integrated bypass valve that mitigates parasitic power loss during normal driving. This new kit is a true bolt-on that requires no additional modifications to the stock engine. For those who want more power, an Edelbrock Stage 2 Upgrade Kit #15884 can be added to transform your Mustang into a track-ready beast! The Edelbrock supercharger for the 2015-17 Mustang has a self-contained lubrication system with a 100,000-mile service interval and comes finished in a durable black powder-coating that blends nicely into the engine compartment. Each kit includes a complete set of preformed hoses, hardware and a full-color manual that provides clear step-by-step instructions for ease of installation. This system is designed and manufactured in the USA and is covered by Edelbrock’s industry-leading 3-year/36,000-mile warranty.
The Edelbrock modular-inlet supercharger system is now available for 2015-17 Ford Mustang w/5.0L Coyote engine. The bolt-on Edelbrock supercharger Kit #15838 produces 690 horsepower with 588 ft-lbs of torque.
Ford:Modular Coyote 4V:302 (5.0L)