-
The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Audi A3 and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, the SP3089 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen SP performance intake provides power you can hear and feel! On our dyno, the SP3089 put down an impressive 10 additional horsepower and 11 pound-feet of tire-scorching torque; This intake provides an aggressive and throaty tone that is unmatched in the aftermarket and one that you’ll enjoy every time you smash the accelerator! Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in amazing finishes ? SP3089P (Polished), SP3089WB (Wrinkle Black), and finally SP3089WR (Wrinkle Red). To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Short Ram Air Intake System; Incl. Tubing/SuperNano-Web Dry Filter/Hardware/Instruction; HP Gains +10 HP/Torque Gains +11 ft./lbs.; Polished;
Excludes Quattro- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield w/cover specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 10 hp and 11 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- System is designed to reuse the factory MAF housing
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1078-BB
- Only fits vehicles equipped with MAF Sensor
- Injen Technology Limited Lifetime Warranty
- Aggressive engine tone under full throttle
- Optional hydroshield part number 1120BLK
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Short Ram Air Intake Design
- Fits FWD vehicles only
-
The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Audi A3 and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, the SP3089 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen SP performance intake provides power you can hear and feel! On our dyno, the SP3089 put down an impressive 10 additional horsepower and 11 pound-feet of tire-scorching torque; This intake provides an aggressive and throaty tone that is unmatched in the aftermarket and one that you’ll enjoy every time you smash the accelerator! Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in amazing finishes ? SP3089P (Polished), SP3089WB (Wrinkle Black), and finally SP3089WR (Wrinkle Red). To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Short Ram Air Intake System; Incl. Tubing/SuperNano-Web Dry Filter/Hardware/Instruction; HP Gains +10 HP/Torque Gains +11 ft./lbs.; Wrinkle Black;
Excludes Quattro- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield w/cover specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 10 hp and 11 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- System is designed to reuse the factory MAF housing
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1078-BB
- Only fits vehicles equipped with MAF Sensor
- Injen Technology Limited Lifetime Warranty
- Aggressive engine tone under full throttle
- Optional hydroshield part number 1120BLK
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Short Ram Air Intake Design
- Fits FWD vehicles only
-
The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Audi A3 and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, the SP3089 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen SP performance intake provides power you can hear and feel! On our dyno, the SP3089 put down an impressive 10 additional horsepower and 11 pound-feet of tire-scorching torque; This intake provides an aggressive and throaty tone that is unmatched in the aftermarket and one that you’ll enjoy every time you smash the accelerator! Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in amazing finishes ? SP3089P (Polished), SP3089WB (Wrinkle Black), and finally SP3089WR (Wrinkle Red). To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Short Ram Air Intake System; Incl. Tubing/SuperNano-Web Dry Filter/Hardware/Instruction; HP Gains +10 HP/Torque Gains +11 ft./lbs.; Wrinkle Red;
Excludes Quattro- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield w/cover specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 10 hp and 11 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- System is designed to reuse the factory MAF housing
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1078-BB
- Only fits vehicles equipped with MAF Sensor
- Injen Technology Limited Lifetime Warranty
- Aggressive engine tone under full throttle
- Optional hydroshield part number 1120BLK
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona, California USA
- No additional tuning required
- Short Ram Air Intake Design
- Fits FWD vehicles only
-
SuperNano-Web Dry Air Filter: “That’s massive!”is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO1104 cold air intake system. This filter has been uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock technology has allowed our engineers to use the largest filter possible for this application, which increases the available air volume – resulting in added power while keeping the installation process quick and simple. Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit. Hassle-Free Installation: Make it easy! The Injen Evolution Air intakes that use our Twist-Lock System have been strategically designed to use fewer parts to provide the end user with one of the quickest and simplest installations available on the market today. Dyno Proven: Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your BMW. So after hours of designing and dyno testing, Injen is proud to say that the EVO1104 Evolution Air Intake system puts down numbers of up to 7 additional horsepower and 7 Ft.-lbs. of torque.
Evolution Series Air Induction System; Incl. Enclosed Airbox w/Sight Window/Intake Tube/SuperNano-Web Dry Air Filter/Hardware; HP Gains +8 HP/Torque Gains +7 ft./lbs.;- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances underHood appearances.
- Aggressive underHood appearance while maintaining an OE fit
- Aggressive Under Hood Appearance While Maintaining OE Fit
- Stainless steel band clamps with inner protective liner
- Dyno Proven gains of up to 7 hp and 7 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Durable Roto-Molded Polyethylene tube and housing
- Reinforced automotive grade silicone couplers
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Replacement air filter # X-1112-BB
- Made in Pomona, California USA
-
The Injen Technology engineers are experts when it comes to performance, PERIOD. From Cars to Trucks to Powersports, Injen has a variety of exhaust systems to choose from. All of Injen Technology Performance exhaust systems are constructed from mandrel bent stainless steel tubing Mandrel-bending ensures the tubing maintains its shapes and size throughout the entire length, providing smooth, unrestricted airflow. From the Investment cast flanges to the custom hangers, all Injen exhaust systems are 100% TIG welded and handcrafted in the USA and include all tubing, mufflers, and hardware necessary for a hassle free installation. Each system is uniquely designed to offer an aggressive sound that brings out some massive power. Like all other Injen products, the Injen exhaust systems are proudly built in Pomona, CA.
Cat-Back Exhaust System; Incl. Tubing/Mid Section Pipe w/Resonator/Dual 4 in. Titanium Tips/Hardware; HP Gains +11 HP/Torque Gains +10 ft./lbs.; 304 Stainless Steel; Polished;
Fits Civic Si Sedans Only- If you’re looking to improve sound, power, and looks then this is the system for you!
- Hand Crafted and TIG Welded to Perfection for Strength and Durability
- Stainless Steel Investment Cast Flanges For a Fast and Easy Install
- Full 76MM piping made from premium 304 SS Mandrel-Bent Tubing
- Features Injen’s integrated resonator for crisp, clean sound
- Dyno Proven gains of up to 11 hp and 10 lb?ft of torque
- Center exit design fits with factory rear valance
- Beautiful dual 4.0″burnt titanium exhaust tips
- Premium Stainless Steel Hardware and Hangers
- Manufactured in Pomona, California USA
- Designed And Made In Pomona; CA
- Fits Civic Si Sedan models ONLY
- No Cutting or Welding Required
-
When word hit the streets that the 10th Generation Honda Civic was released 2016, our team here at Injen Technology couldn’t wait to get our hands on for development! Once inside our secret test lab, our engineers found that the little 1.5L turbo engine was extremely robust and packed a serious punch! Just one short year later, the 2017 Civic Si was released to the world and we knew that this pumped up machine needed the touch from our legendary team here at Injen Technology. Quick, nimble, and sporty are all words used to describe the 2017-2020 Honda Civic Si. Our engineering team here at Injen Technology took the 2017-2020 Honda Civic Si equipped with the 1.5L Turbocharged engine deep into our R&D lab to extract the hidden power potential inside the engine and what’ve come up is nothing short of amazing. Our engineers found that there was hidden power in the intake tube design and designed an intake tube with smooth transitions for reduced restriction and improved performance. Our new SP1584 short ram cold air intake opens up the intake tract with a large 2.75″aluminum intake tube that allows that turbo and engine to breathe deep and produce the power that you’ve been craving. To take it one step further, our team also utilized our patented MR technology and our patented air fusion process that allows Intakes to be finely tuned during the manufacturing process for maximum performance WITHOUT the need for additional electronic tuners. Along with that impressive intake tube design, our engineers also developed a custom heatshield that installs easily and helps keep your inlet air temps low and in check. , ,
Short Ram Air Intake System; Incl. Intake Tube/SuperNano-Web Dry Air Filter/Hardware/Instruction; HP Gains +16 HP/Torque Gains +14 ft. lbs.; Laser Black;- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Available in Polished (SP1584P), Black (SP1584BLK), and Wrinkle Red (SP1584WR) finishes
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 16 hp and 14 lb-ft. of torque
- Injen Front Mount intercooler also available ? FM1573i
- Injen Titanium Tip exhaust also available ? SES1581TT
- Fully serviceable Injen SuperNano-Web dry air filter
- Features Injen’s patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Features Injen’s patented Air Fusion Technology
- Injen Charge Pipes also available ? SES1573ICP
- Replacement air filter part number X-1062-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Optional hydroshield part number 1031BLK
- 6061-T6 aluminum intake tubing
- Made in Pomona, California USA
- Made In Pomona California USA
- No additional tuning required
- Short Ram Air Intake Design
-
When word hit the streets that the 10th Generation Honda Civic was released 2016, our team here at Injen Technology couldn’t wait to get our hands on for development! Once inside our secret test lab, our engineers found that the little 1.5L turbo engine was extremely robust and packed a serious punch! Just one short year later, the 2017 Civic Si was released to the world and we knew that this pumped up machine needed the touch from our legendary team here at Injen Technology. Quick, nimble, and sporty are all words used to describe the 2017-2020 Honda Civic Si. Our engineering team here at Injen Technology took the 2017-2020 Honda Civic Si equipped with the 1.5L Turbocharged engine deep into our R&D lab to extract the hidden power potential inside the engine and what’ve come up is nothing short of amazing. Our engineers found that there was hidden power in the intake tube design and designed an intake tube with smooth transitions for reduced restriction and improved performance. Our new SP1584 short ram cold air intake opens up the intake tract with a large 2.75″aluminum intake tube that allows that turbo and engine to breathe deep and produce the power that you’ve been craving. To take it one step further, our team also utilized our patented MR technology and our patented air fusion process that allows Intakes to be finely tuned during the manufacturing process for maximum performance WITHOUT the need for additional electronic tuners. Along with that impressive intake tube design, our engineers also developed a custom heatshield that installs easily and helps keep your inlet air temps low and in check. , ,
Short Ram Air Intake System; Incl. Intake Tube/SuperNano-Web Dry Air Filter/Hardware/Instruction; HP Gains +16 HP/Torque Gains +14 ft. lbs.; Polished;- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Available in Polished (SP1584P), Black (SP1584BLK), and Wrinkle Red (SP1584WR) finishes
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 16 hp and 14 lb-ft. of torque
- Injen Front Mount intercooler also available ? FM1573i
- Injen Titanium Tip exhaust also available ? SES1581TT
- Fully serviceable Injen SuperNano-Web dry air filter
- Features Injen’s patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Features Injen’s patented Air Fusion Technology
- Injen Charge Pipes also available ? SES1573ICP
- Replacement air filter part number X-1062-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Optional hydroshield part number 1031BLK
- 6061-T6 aluminum intake tubing
- Made in Pomona, California USA
- Made In Pomona California USA
- No additional tuning required
- Short Ram Air Intake Design
-
When word hit the streets that the 10th Generation Honda Civic was released 2016, our team here at Injen Technology couldn’t wait to get our hands on for development! Once inside our secret test lab, our engineers found that the little 1.5L turbo engine was extremely robust and packed a serious punch! Just one short year later, the 2017 Civic Si was released to the world and we knew that this pumped up machine needed the touch from our legendary team here at Injen Technology. Quick, nimble, and sporty are all words used to describe the 2017-2020 Honda Civic Si. Our engineering team here at Injen Technology took the 2017-2020 Honda Civic Si equipped with the 1.5L Turbocharged engine deep into our R&D lab to extract the hidden power potential inside the engine and what’ve come up is nothing short of amazing. Our engineers found that there was hidden power in the intake tube design and designed an intake tube with smooth transitions for reduced restriction and improved performance. Our new SP1584 short ram cold air intake opens up the intake tract with a large 2.75″aluminum intake tube that allows that turbo and engine to breathe deep and produce the power that you’ve been craving. To take it one step further, our team also utilized our patented MR technology and our patented air fusion process that allows Intakes to be finely tuned during the manufacturing process for maximum performance WITHOUT the need for additional electronic tuners. Along with that impressive intake tube design, our engineers also developed a custom heatshield that installs easily and helps keep your inlet air temps low and in check. , ,
Short Ram Air Intake System; Incl. Intake Tube/SuperNano-Web Dry Air Filter/Hardware/Instruction; HP Gains +16 HP/Torque Gains +14 ft. lbs.; Wrinkle Red;- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Available in Polished (SP1584P), Black (SP1584BLK), and Wrinkle Red (SP1584WR) finishes
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 16 hp and 14 lb-ft. of torque
- Injen Front Mount intercooler also available ? FM1573i
- Injen Titanium Tip exhaust also available ? SES1581TT
- Fully serviceable Injen SuperNano-Web dry air filter
- Features Injen’s patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Features Injen’s patented Air Fusion Technology
- Injen Charge Pipes also available ? SES1573ICP
- Replacement air filter part number X-1062-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Optional hydroshield part number 1031BLK
- 6061-T6 aluminum intake tubing
- Made in Pomona, California USA
- Made In Pomona California USA
- No additional tuning required
- Short Ram Air Intake Design
-
The all new Type-R Civic (FK8) is a great platform for soaking up highway miles during the weekday and tearing it up at the track on the weekend! With some minor modifications, the 2.0L Turbo engine is capable of producing some gnarly power. But, the added power of some tuning and bolt-ons will push the limits of the stock charge air system, necessitating an upgrade for the stock tube-and-fin intercooler, which is prone to heat soak. Thankfully Injen has developed a highly efficient bar-and-plate intercooler engineered specifically to fit the Type-R Civic. The FM1582i intercooler is a direct-fit unit and features a 25% increase in core volume while requiring no modification to your civic. This cooler is constructed with cast end tanks and precision CNC-machined aluminum flanges for use with the factory intercooler piping. The Injen Honda Civic Type-R intercooler reduces intake temperatures by 30?F and provides an increase of up to 27 HP and 23 Ft. Lbs. of torque while retaining factory boost pressure across the core. This Civic Type-R 2.0L turbo intercooler also features precision TIG-welding and has a unique silver finish that is reminiscent of brushed aluminum. With a one-hour installation, great power, temperature benefits, and a Lifetime Warranty, the Injen FM1582i intercooler is a must-do upgrade for any stock or modified Civic type-R.
Intercooler Kit; Incl. Bar And Plate Front Mount Intercooler/End Tanks/Hoses; HP Gains +27.0 HP/Torque Gains +23.0 ft. lbs.; Raw Finish;
No piping included. Optional intercooler piping kit available. Part # SES1582ICP- Note: This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
- Optional intercooler piping kit available. Part # SES1582ICP
- Optional intercooler piping kit available. P/N# SES1582ICP
- Dyno Proven gains of up to 27 hp and 23 lb-ft. of torque
- Intercooler core dimensions 21.06 x 5.750 x 5.28
- CAD designed end tanks for optimal air flow.
- 100% Direct bolt-on front mount intercooler
- Designed to work with the stock calibration
- Injen Technology Limited Lifetime Warranty
- All Factory Mounting Locations
- Made in Pomona, California USA
- No piping included.
-
This hot side charge pipe is an upgrade over the factory unit and is manufactured from oversized mandrel-bent 6061 aluminum and every bend and TIG weld is completed by hand at the Injen Technology headquarters in Pomona, California. Having an internal diameter of 3.00in, this hot side charge pipe is able to reduce restriction and quickly transfer hot air smoothly to the intercooler. It also aides in balancing airflow into the intercooler to improve performance and also helps lower engine damaging exhaust gas temperatures (EGTs).
SES Intercooler Pipe – Hot Side Only, Part No. SES9004ICPH, 2017-2022 Ford Super Duty Truck V8-6.7L Turbo Diesel
Intercooler not included- Note: This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
- Precision CNC machined factory-style quick connections utilizing the OE spring clip
- for Optimum performance, use with Injen’s EVO9004 cold air intake
- Hot Side Piping Only – Complete system is available – SES9004ICP
- Pairs perfectly with Injen’s SES9004ICPC Cold Side Charge Pipe
- Includes all necessary hardware for a hassle-free installation
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Stainless Steel Band Clamps with Inner Protective Liner
- Increase Throttle Response and Decreases Turbo Lag
- Automotive Grade Reinforced Silicone Couplers
- Manufactured from Mandrel-Bent 6061 Aluminum
- Unique Injen Logo Plate for a Refined Style
- Injen Technology Limited Lifetime Warranty
- Works seamlessly with the OE intercooler
- Hot Side Pipe Inside Diameter – 3.00in
- Uses all factory mounting locations
- Made in Pomona California, USA
- Wrinkle Black ? SES9004ICPHWB
- Available in three finishes
- Wrinkle Red ? SES9004ICPHWR
- Polished – SES9004ICPH
-
This upgraded charge pipe system is manufactured from oversized mandrel-bent 6061 aluminum and every bend and TIG weld is completed by hand at the Injen Technology headquarters in Pomona, California. The Injen hot-side pipe has an ID of 3.00in and the cold side has an ID of 3.25in. By utilizing oversized piping on both the hot side and the cold side, these charge pipes are able to reduce restriction, balance the airflow in and out of the intercooler to improve performance, and lower engine damaging exhaust gas temperatures (EGTs).
SES Intercooler Pipes, Part No. SES9004ICP, 2017-2022 Ford Super Duty Truck V8-6.7L Turbo Diesel
Intercooler not included- Note: This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
- Precision CNC machined factory-style quick connections utilizing the OE spring clip
- Includes all necessary hardware for a hassle-free installation
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Complete system including both HOT and COLD side piping
- Stainless Steel Band Clamps with Inner Protective Liner
- Pairs perfectly with Injen’s EVO9004 cold air intake
- Cold side pipe is 2-pieces for easier installation
- Increase Throttle Response and Decreases Turbo Lag
- Automotive Grade Reinforced Silicone Couplers
- Manufactured from Mandrel-Bent 6061 Aluminum
- Unique Injen Logo Plate for a Refined Style
- Injen Technology Limited Lifetime Warranty
- Cold Side Pipe Inside Diameter – 3.250in
- Works seamlessly with the OE intercooler
- Hot Side Pipe Inside Diameter – 3.00in
- Uses all factory mounting locations
- Made in Pomona California, USA
- Wrinkle Black ? SES9004ICPWB
- Available in three finishes
- Wrinkle Red ? SES9004ICPWR
- Polished – SES9004ICP
-
This upgraded charge pipe system is manufactured from oversized mandrel-bent 6061 aluminum and every bend and TIG weld is completed by hand at the Injen Technology headquarters in Pomona, California. The Injen hot-side pipe has an ID of 3.00in and the cold side has an ID of 3.25in. By utilizing oversized piping on both the hot side and the cold side, these charge pipes are able to reduce restriction, balance the airflow in and out of the intercooler to improve performance, and lower engine damaging exhaust gas temperatures (EGTs).
SES Intercooler Pipes, Part No. SES9004ICPWB, 2017-2022 Ford Super Duty Truck V8-6.7L Turbo Diesel
Intercooler not included- Note: This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
- Precision CNC machined factory-style quick connections utilizing the OE spring clip
- Includes all necessary hardware for a hassle-free installation
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Complete system including both HOT and COLD side piping
- Stainless Steel Band Clamps with Inner Protective Liner
- Pairs perfectly with Injen’s EVO9004 cold air intake
- Cold side pipe is 2-pieces for easier installation
- Increase Throttle Response and Decreases Turbo Lag
- Automotive Grade Reinforced Silicone Couplers
- Manufactured from Mandrel-Bent 6061 Aluminum
- Unique Injen Logo Plate for a Refined Style
- Injen Technology Limited Lifetime Warranty
- Cold Side Pipe Inside Diameter – 3.250in
- Works seamlessly with the OE intercooler
- Hot Side Pipe Inside Diameter – 3.00in
- Uses all factory mounting locations
- Made in Pomona California, USA
- Wrinkle Black ? SES9004ICPWB
- Available in three finishes
- Wrinkle Red ? SES9004ICPWR
- Polished – SES9004ICP
Showing 23485–23496 of 36244 results