Shop

Add some easy horsepower to your Ride with this RD Series Performance cold air intake (CAI) from Injen Technology! The engineers at Injen have spent considerable amounts of time designing, testing, and perfecting this CAI to produce some serious bolt-on power while also providing amazing engine bay aesthetics. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. , , The soul of this intake is found within our mandrel-bent 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. This tube reaches into the depths of the engine bay to collect the coolest and densest air available. Additionally, this RD intake also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen RD performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? Injen also offers this intake system in a polished or a powder-coated Black finish. To top it all off, this RD CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!,
RD Cold Air Intake System, Part No. RD1966P, 2002-2006 Nissan Sentra SE-R L4-2.5L, 2002-2006 Nissan Sentra SE-R SPEC-V L4-2.5L.
Nissan 02-06 Sentra SER; Spec V 2.5L (CARB 02-04 Only)

• Smooth mandrel-bent intake piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Available with a polished or Black powder coated finish
• Dyno Proven gains of up to 7 hp and 7 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1033BLK or 1033RED
• Replacement air filter part number X-1014-BB
• 6061-T6 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA
• SuperNano Dry Filter X-1014
• CARB EO #: D-476-5

Add some easy horsepower to your Ride with this RD Series Performance cold air intake (CAI) from Injen Technology! The engineers at Injen have spent considerable amounts of time designing, testing, and perfecting this CAI to produce some serious bolt-on power while also providing amazing engine bay aesthetics. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. , , The soul of this intake is found within our mandrel-bent 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. This tube reaches into the depths of the engine bay to collect the coolest and densest air available. Additionally, this RD intake also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen RD performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? Injen also offers this intake system in a polished or a powder-coated Black finish. To top it all off, this RD CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!,
RD Cold Air Intake System, Part No. RD1200WR, 2002-2007 Subaru Impreza WRX H4-2.0L Turbo, 2002-2007 Subaru Impreza WRX STI H4-2.5L Turbo.
Excludes Wagon models
Subaru 02-06 WRX 2.0L Turbo; 04 Sti2.5L Turbo 4 cyl. Exluces Wagon models-(CARB for 02-04 Only)

• Smooth mandrel-bent intake piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Dyno Proven gains of up to 24 hp and 24 lb-ft. of torque
• Available with a polished or Black powder coated finish
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1033BLK or 1033RED
• Replacement air filter part number X-1013-BB
• 6061-T6 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• and Wrinkle Red (WR) finishes.
• Made in Pomona, California USA
• Available in our Polished (P)
• Increased HP Up To 24.4
• CARB EO #: D-476-5
• Black (BLK)

Add easy horsepower to your ride with the Injen Technology IS Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!
IS Short Ram Cold Air Intake System, Part No. IS1200BLK, 2002-2007 Subaru Impreza WRX H4-2.0L Turbo, 2002-2007 Subaru Impreza WRX STI H4-2.0L Turbo.
02-06 WRX 2.0L Turbo; 04-07 Sti (IS Recommended for Modified WRX or w/Turbo Upgrade)

• Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Dyno Proven gains of up to 10 hp and 10 lb-ft. of torque
• Available with a polished or Black powder coated finish
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1033BLK or 1033RED
• Replacement air filter part number X-1014-BB
• T6-6061 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA
• CARB EO #: D-476-5
• Black

Add some easy horsepower to your Ride with this RD Series Performance cold air intake (CAI) from Injen Technology! The engineers at Injen have spent considerable amounts of time designing, testing, and perfecting this CAI to produce some serious bolt-on power while also providing amazing engine bay aesthetics. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. , , The soul of this intake is found within our mandrel-bent 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. This tube reaches into the depths of the engine bay to collect the coolest and densest air available. Additionally, this RD intake also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen RD performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? Injen also offers this intake system in a polished or a powder-coated Black finish. To top it all off, this RD CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!,
RD Cold Air Intake System, Part No. RD1200P, 2002-2007 Subaru Impreza WRX H4-2.0L Turbo, 2002-2007 Subaru Impreza WRX STI H4-2.5L Turbo.
Excludes Wagon models
Subaru 02-06 WRX 2.0L Turbo; 04 Sti2.5L Turbo 4 cyl. Exluces Wagon models-(CARB for 02-04 Only)

• Smooth mandrel-bent intake piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Dyno Proven gains of up to 24 hp and 24 lb-ft. of torque
• Available with a polished or Black powder coated finish
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1033BLK or 1033RED
• Replacement air filter part number X-1013-BB
• 6061-T6 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• and Wrinkle Red (WR) finishes.
• Made in Pomona, California USA
• Available in our Polished (P)
• Increased HP Up To 24.4
• CARB EO #: D-476-5
• Black (BLK)

Add easy horsepower to your ride with the Injen Technology IS Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!
IS Short Ram Cold Air Intake System, Part No. IS1200P, 2002-2007 Subaru Impreza WRX H4-2.0L Turbo, 2002-2007 Subaru Impreza WRX STI H4-2.0L Turbo.
Subaru 02-06 WRX 2.0L Turbo; 04-07 Sti (IS Recommended for Modified WRX or w/Turbo Upgrade)

• Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Dyno Proven gains of up to 10 hp and 10 lb-ft. of torque
• Available with a polished or Black powder coated finish
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1033BLK or 1033RED
• Replacement air filter part number X-1014-BB
• T6-6061 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA
• CARB EO #: D-476-5
• Polished

Add some easy horsepower to your Ride with this RD Series Performance cold air intake (CAI) from Injen Technology! The engineers at Injen have spent considerable amounts of time designing, testing, and perfecting this CAI to produce some serious bolt-on power while also providing amazing engine bay aesthetics. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. , , The soul of this intake is found within our mandrel-bent 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. This tube reaches into the depths of the engine bay to collect the coolest and densest air available. Additionally, this RD intake also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen RD performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? Injen also offers this intake system in a polished or a powder-coated Black finish. To top it all off, this RD CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!,
RD Cold Air Intake System, Part No. RD6066BLK, 2003-2004 Mazda Protege Mazdaspeed L4-2.0L Turbo.
Mazda 03-03.5 Mazdaspeed Protege Turbo

• Smooth mandrel-bent I take piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Dyno Proven gains of up to 14 hp and 14 lb-ft. of torque
• Available with a polished or Black powder coated finish
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1033BLK or 1033RED
• Replacement air filter part number X-1013-BB
• 6061-T6 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA
• Increased HP Up To 14
• CARB EO #: D-476-4

Add easy horsepower to your ride with the Injen Technology IS Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!
Short Ram Air Intake System; Incl. Tubing/Filter/Elbow/Hardware/Instruction; Polished;
Does not fit SULEV Vehicles with MAF sensor
Honda 03-07 Accord 4 Cyl.; LEV Motor Only No MAF Sensor; LEV Motor Only-(CARB E.O. Excludes SULEV vehicles )

• Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Available with a polished or Black powder coated finish
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1033BLK or 1033RED
• Replacement air filter part number X-1014-BB
• T6-6061 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Excludes vehicles with MAF sensor
• SuperNano Web Dry Filter X-1014
• Made in Pomona, California USA
• CARB EO #: D-476-5

Add easy horsepower to your ride with the Injen Technology IS Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!
Short Ram Air Intake System; Incl. Tubing/Filter/Hardware/Instruction; HP Gains +18.1 HP; Polished;
Hyundai 03-04 Tiburon 2.7L V6

• Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Dyno Proven gains of up to 18 hp and 18 lb-ft. of torque
• Available with a polished or Black powder coated finish
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1035BLK or 1035RED
• Replacement air filter part number X-1017-BB
• T6-6061 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA
• Increased HP up to 18.1
• CARB EO #: D-476-4

Add easy horsepower to your ride with the Injen Technology IS Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!
IS Short Ram Cold Air Intake System, Part No. IS2032P, 2004-2005 Toyota Camry V6-3.3L, 2004-2005 Toyota Solara V6-3.3L.
Toyota 03-05 Camry 3.0L; 3.3L V6; 04-05 Solara 3.3L V6

• Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Available with a polished or Black powder coated finish
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1033BLK or 1033RED
• Replacement air filter part number X-1014-BB
• T6-6061 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• CARB E.O. Excludes 2004 & 2005 Models
• Made in Pomona, California USA
• SuperNano-Web Dry Filter
• CARB EO #: D-476-5

Add some easy horsepower to your Ride with this RD Series Performance cold air intake (CAI) from Injen Technology! The engineers at Injen have spent considerable amounts of time designing, testing, and perfecting this CAI to produce some serious bolt-on power while also providing amazing engine bay aesthetics. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. , , The soul of this intake is found within our mandrel-bent 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. This tube reaches into the depths of the engine bay to collect the coolest and densest air available. Additionally, this RD intake also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen RD performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? Injen also offers this intake system in a polished or a powder-coated Black finish. To top it all off, this RD CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!,
Cold Air Intake System; Incl. Tubing/Filter/Hardware/Instruction; HP Gains +22.1 HP/Torque Gains +24.2 ft. lbs.; May Cause Check Engine Light; Polished;
Mazda 03-08 Mazda 6 3.0L V6(CARB 03-04 Only)(May cause check engine light) build for max horsepower gains)

• Smooth mandrel-bent I take piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Dyno Proven gains of up to 22 hp and 24 lb-ft. of torque
• Available with a polished or Black powder coated finish
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1034BLK or 1034RED
• Replacement air filter part number X-1015-BB
• 6061-T6 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA
• Increased HP Up To 22.1
• CARB EO #: D-476-8

Take that Dodge Neon of yours up a notch with the Injen Technology IS8022P Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of the IS8022P it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch to the IS8022P? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!
Short Ram Air Intake System; Incl. Tubing/Filter/Hardware/Instruction; HP Gains +9.8 HP; Polished;
Dodge 03-05 Neon SRT-4 2.4L Turbo CARB 03-04 Only

• Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Dyno Proven gains of up to 10 hp and 10 lb-ft. of torque
• Available with a polished or Black powder coated finish
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1035BLK or 1035RED
• Replacement air filter part number X-1017-BB
• T6-6061 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA
• Increased HP up to 9.8
• CARB EO #: D-476-5

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Cold Air Intake System; Incl. Tubing/Filter/Hardware/Instruction; w/MR Technology; Converts To Short Ram; HP Gains +18.3 HP/Torque Gains +14.0 ft. lbs.; Black;
Converts to Short Ram
Nissan 03-06 350Z 3.5L V6 w/MR Technology Converts to Short Ram

• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 18 hp and 14 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1034BLK or 1034RED
• 2-piece design easily converts to short ram system
• Features Injen’s patented MegaRam (MR) Technology
• Provides power gains while maintaining A/F ratios
• Replacement air filter part number X-1015-BB
• Injen Technology Limited Lifetime Warranty
• Aggressive engine tone under full throttle
• Increased Torque Up To 14 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Cold Air Intake Design
• CARB EO #: D-476-5