-
The Edelbrock #2069 RPM Dual-Quad manifold and carb kit is designed for 348/409 “W-Series” Chevy, small port applications. A huge hit among street rodders, this Dual-Quad Kits offer the ultimate set-up for anyone who wants the look and the performance of dual-quad carbs. The Edelbrock #2069 includes an Edelbrock RPM or RPM Air-Gap Dual-Quad intake manifold and two 500 cfm Thunder Series AVS carburetors calibrated specifically for dual-quad applications (one manual choke, one electric choke). To make the installation simple, these kits also include our high-tech progressive throttle linkage, Russell fuel inlet, high-quality Edelbrock intake gaskets, intake bolt set and carburetor stud kit. The manifold and Thunder Series carbs are available with a standard satin finish or with our bright EnduraShine chrome-like finish for long lasting show quality looks.
Edelbrock RPM Dual-Quad manifold and carb kit for 348/409 “W-Series” Chevy. With a Manifold and Carb Kit, it’s easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a single box.
Chevrolet:W-Series:348 (5.7L)/409 (6.7L)- Edelbrock Total Power Package Maximizes Gains
-
Edelbrock introduces its new E-Street 15-degree LS3 69cc cylinder heads (PN 77620) as a premium replacement option, ensuring great power on any high-performance or stock GM LS3 engine build. These heads offer the best performance value of any aftermarket GM LS3 head. Sold in pairs and assembled with premium COMP Cams valve train components, these LS3 heads are engineered with the same architecture as the factory head, and all stock components will fit without issue. The assembled heads feature Beehive(TM) Valve Springs, chromoly steel retainers, heavy-duty stainless-steel valves, and top-quality valve seals – all inspected and assembled by qualified Edelbrock technicians. The intake valve size is 2.165 while the exhaust is 1.590 . The Beehive Valve Springs allow up to .570 lift camshafts, ideal for many mild to hot camshaft grinds. Edelbrock E-Street 15-degree LS3 cylinder heads are manufactured with premium aluminum alloy, machined to the industry’s tightest tolerances. They feature manganese bronze valve guides for extended wear, with particular emphasis placed on holding precision tolerances on valve seat concentricity. This allows the valves to seal securely, eliminating any leak-down and increasing cylinder pressures during engine operation. All Edelbrock cylinder heads feature patented Clean Cast Technology(TM) , a revolutionary process that eliminates casting flaws and promotes a smoother internal surface finish for greater air and coolant flow. These benefits provide more power and increased cooling ability right out of the box. A unique dual spark-plug-pocket design allows you to use the factory-style tapered-seat spark plugs or gasket-seat spark plugs available in wider heat ranges for maximum tunability.
The E-Street Cylinder Heads for GM LS3 are designed as premium quality, bolt-on-ready cylinder heads for any high-performance or stock replacement application. The chambers are 69cc, while the Beehive springs allow .570 lift camshafts.- 2.165″ Stainless Intake Valve, 1.59″ Stainless Exhaust Valve
- Sold in Pairs (2 complete, assembled heads per part number)
- Ready to bolt on out of the box
- GM LS3 Compatible
-
The Pro-Flo XT Chrysler 440 #7144 EFI intake manifold is engineered with a large plenum and long tapered runners to deliver maximum horsepower and broad torque band throughout the rpm range 1500-7000 rpm. Features include a 90mm throttle bore opening. This manifold produced 20 more horsepower over our #35090 manifold at 5500 rpm. Accepts Pro-Flo XT throttle body #3869 or Ford throttle body #3818. Compatible with B/B Chrysler XT Fuel Rail Kit #3644 (sold separately).
Edelbrock Pro-Flo XT EFI Intake Manifold for Chrysler 413-426-440 Big-Block V8
Chrysler:Big-Block RB Series:413 (6.8L)/426 (7.0L)/440 (7.2L)- As-Cast Finish
-
For those of you who are running a Pro-Flo 4 EFI on your vehicle and have a damaged ECU, Edelbrock is now offering a replacement unit. Engine Control Unit (ECU) #3543 for the Pro-Flo 4 is a new service item for customers who need to replace a damaged ECU or would like to carry an additional ECU as a spare.
Engine Control Unit (ECU) #3543 for the Pro-Flo 4 is a new service item for customers who need to replace a damaged ECU or would like to carry an additional ECU as a spare. -
no need for custom tuning or a laptop. The included EZ-Street Bluetooth Tuner App, available for both iOS and Android, allows users to configure the system, adjust settings, and monitor performance through intuitive preprogrammed dashboards. Data logging, fuel control, and dual electric fan management are all accessible directly from a smartphone or tablet.
Beyond fuel delivery, the EZ-Street EFI offers the option of fully programmable ignition control, enabling optimized performance and improved fuel efficiency. When paired with a Pro-Flo distributor (sold separately), the EZ-Street EFI can deliver fully integrated timing control at the touch of your fingers. With an internal coil driver and compatibility across most HEI distributors, ready-to-run distributors, and CDI boxes, the system eliminates the need for separate ignition modules. Capable of supporting up to 650 horsepower, the EZ-Street EFI system combines advanced annular-fuel-venturi distribution with modern CAN communication protocols to provide reliable, high-performance results in a simplified package.
Engineered to provide an affordable and user-friendly upgrade for any V8 engine originally equipped with a carburetor, the EZ-Street EFI system seamlessly integrates cutting-edge technology with traditional styling.
Supports 650 hp, 4150 Flange, 1000 CFM, Classic looks of a traditional carburetor, Highly refined base tunes to chose from plus self learning technology, Bosch LSU 4.9 Wideband O2 sensor included, Complete Spark Control, Built in ignition coil driver, Built in Bluetooth communication, Easy to use E-Tuner app for Android and IOS, CAN Communication, Simple 4 wire hookup- Supports 650 horsepower, Built in fuel pressure sensor, Standard 4150 flange, Classic Carburetor looks, Uses common linkages and air cleaners, Offers full spark control or fuel control only depending on users needs
- Built in coil driver, Bosch LSU 4.9 Wideband O2 sensor, Closed loop, Self Learning fueling technology, CAN Communication simplifies integration with other devices such as Transmission Controllers
- Compact, fully potted ECU with built in Bluetooth communication, Android and IOS E-Tuner app for simple and clean setup and engine monitoring, Simple 4 wire hookup for easy installation
- E-Tuner app offers easy setup, changes, and monitoring with crisp, clear graphics and easy navigation
- Choice of three calibrations offers great out of the box performance even with big camshafts
- Supports 650 horsepower
-
Edelbrock Coil Pack #22783 is a set of eight coil-on-plug coils designed as direct performance replacements for the OEM coils on 2004-08 Ford 4.6L-5.4L 3-valve V8 engines. Each coil in the #22783 pack features advanced technology with heavy-duty primary and secondary windings inside of a corrosion-resistant housing. The enhanced windings in these coils offer higher energy and voltage output for greater spark and can help to provide quicker starts with improved idle quality. Coil housings are resistant to heat, shock, vibration and corrosion. This coil is also sold individually under #22782.
COIL ON PLUG 2004-08 FORD V8 4.6L-5.4L 3 VALVE ENGINE (SET OF 8)
Ford V8 4.6L-5.4L; 2004-08- Max Fire Coil-On-Plug Set
-
All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3639 fuel rail kit is for use with 4.6L Ford Victor Jr. Manifold #28385 and standard injectors. Rails will have a Clear Anodized Finish and 3/8″ NPT inlet/outlets.
3639 fuel rail kit is for use with 4.6L Ford Victor Jr. Manifold #28385 and standard injectors. Rails will have a Clear Anodized Finish and 3/8″ NPT inlet/outlets.
Ford:Modular 2V:281 (4.6L)- Threaded On Both Ends
-
These complete cam kits include an Edelbrock Rollin’ Thunder(TM) hydraulic roller camshaft, Edelbrock improved hydraulic roller lifters and pushrods that are dyno-matched for a trouble-free installation. Each kit includes an Edelbrock Rollin’ Thunder Hydraulic Camshaft, hydraulic roller lifters, lifter guides, hold-down spider (only on 1987-later applications) and pushrods. These kits can produce great performance gains when matched with the rest of the Edelbrock Total Power Package.
Edelbrock Performer RPM Hydraulic Roller Camshaft #2220 for 390-427 Ford FE Engines
Ford:FE:390 (6.4L)/406 (6.7L)/410 (6.7L)/427 (7.0L)- Reduces Friction And Improve Fuel Economy
-
Edelbrock part #7123 Performer 5.0 RPM II intake manifold for 1986-95 5.0L Mustang engines has shown significant gains in horsepower over existing designs in the 1500 to 6500 rpm range, and is ideally suited for street and strip applications. This manifold consists of a V-shaped crossover with an increasing cross-sectional area, which passes over to eight large tapered runners. Our 70mm throttle body is recommended (75mm will require port matching). 1994-95 Mustang engines require Throttle Body Adapter #38353 and Adapter Kit #8025. May not fit with stock hood of 1994-95 Mustangs, aftermarket hood recommended.
Edelbrock Performer 5.0 RPM II Intake Manifold for Ford 5.0 Small-Block V8
Ford:Small-Block Windsor:302 (5.0L)- Also Available In Polished – See PN[71231]
-
Edelbrock part #7121-CP Performer RPM 302 intake manifold is designed for street 289-302 c.i.d. Ford V8’s. This dual-plane high rise manifold has excellent high rpm power while retaining throttle response. No provisions for exhaust heated choke. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.
Edelbrock Performer RPM 302 Intake Manifold for Ford 289-347 Small-Block V8, Chrome Plasma -
Edelbrock Part PN 7521-CP RPM Air-Gap intake manifold is designed for the Small-Block Ford 289-302 CID V8 including 331-347 stroker applications. The RPM Air-Gap incorporates the same race-winning technology that’s been used on our Victor Series competition intakes and is the perfect manifold for hot rodders, street custom enthusiasts, bracket racers or any builder looking for optimum performance in the 1,500-6,500 RPM range with a serious look of horsepower under the hood. The Air-Gap design features an open air space under the plenum that separates the runners from the hot engine resulting in a cooler, denser charge for more power. The 7521 RPM Air-Gap features larger runners (7% at the plenum entries) than the standard 7121 Performer RPM design that is beneficial to larger CID stroker engines. The PN 7521-CP version comes with a brilliant Chrome plasma finish that is durable and easy to maintain. The 7521-CP includes nitrous bosses but no provision for exhaust heated chokes and no exhaust crossover. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000. For more info go to www.lokar.com.
Edelbrock Part #7521-CP RPM Air-Gap intake manifold is designed for small-block 302/331/347 Ford V8. Perfect for hot rods, street machines, bracket racers or any builder looking for optimum performance with a beautiful Chrome Plasma finish.- 7 stage prewash and 4 stage coating for durability and beauty
- Outstanding performance for any 1500-6500 rpm application
- Long runner high-rise design for broad torque curve
- No polishing, just wipe and go!
- Bright Chrome Plasma finish
-
Edelbrock part #3522 is a set of (8), short body Siemens Deka High Impedance (12.5 ohms) fuel injector with a flow rate of 80 lb/hr (830cc) @ 43.5psi.
Edelbrock set of (8), short body Siemens Deka High Impedance (12.5 ohms) fuel injector, 80 Lb/hr
Showing 21613–21624 of 50123 results