-
The legendary Ford Bronco has returned, and under the retro-styled hood lies a new legend: the 2.7L EcoBoost. The 2.7L EcoBoost has been powering Fords for nearly a decade and has become one of the most respected truck engines available. The second generation 2.7L features both port and direct injection for efficiency throughout the RPM range. While the added port injection helps clean the intake valves, it doesn’t protect the rest of your engine from the effects of blow-by. As blow-by flows through your intake, it coats components like sensors and your intercooler in a sludge of oil, carbon, and fuel, reducing their ability to function. Blow-by can also reduce the effectiveness of your engine oil. The factory air-oil-separator drains blow-by back into the oil pan, which is great for the environment, but the fuel and water in blow-by can thin your engine oil and reduce its effectiveness. Finally, any blow-by that does make its way back into the cylinder can reduce the effective octane of your fuel and, for a high-strung turbocharged engine like the 2.7L EcoBoost, lower octane means less power. The solution to all of those issues is to capture the blow-by and keep it out of the engine with a Mishimoto catch can. Our direct-fit baffled oil catch can kit for the 2021+ Ford Bronco 2.7L EcoBoost uses custom-molded hoses to intercept blow-by before it enters the intake and captures it to be recycled at your next oil change. Our catch can features an internal baffle and air turbulators that help condense oil, fuel, and water vapor from the blow-by, as well as a 50-micron sintered bronze filter that captures carbon particles. Our catch can is mounted away from engine vibration with a sturdy 2.5mm-thick steel bracket and our molded hoses include Ford-specific quick-disconnect fittings for an easy and clean install. Like all our Ford Bronco products, this catch can kit is backed by our Mishimoto Lifetime Warranty for a lifetime of clean running.
Engine oil catch can kit designed to capture oil vapors and prevent buildup in the intake system. Helps maintain efficiency, reduce carbon deposits, and improve performance with durable components and easy installation.- Pre-installed factory-style quick-disconnect fittings for clean installation
- Sturdy 2.5mm-thick steel brackets withstand rough roads and off-road abuse
- Direct-fit bracket mounts the catch can away from engine vibration
-
The new Bronco is here and if you’re even remotely interested in the automotive world, you know this is a big deal. Our team has evaluated the new Bronco and determined it is certainly worthy of the badge with impressive tech, and substantial capability, wrapped up in classical styling. Our familiarity with the 2.3L EcoBoost engine powering the Bronco made for a quick decision to create an effective catch-can solution. These engines feature direct-injection, which is great for creating an efficient burn and saving fuel but allows for carbon buildup on the intake valves. As blow-by flows over the intake valves, oil and carbon deposits can build up, impeding airflow and eventually preventing the valves from closing. The best way to treat carbon buildup is to prevent it, and that’s where this Mishimoto Bronco 2.3L direct-fit catch can kit comes in. This Mishimoto catch can kit diverts blow-by away from the intake and traps it in our catch can. Inside the can, a set of air turbulators and baffles separate fuel, oil, and water vapors from the crankcase gasses and collects them to be drained next time you change your oil. By not returning the blow-by to your oil pan, our kit prevents fouling of the oil that could reduce its effectiveness, leading to accelerated engine wear. Finally, a sintered bronze filter removes any remaining carbon from the crankcase gases so that only clean air returns to your intake. The Mishimoto Ford Bronco 2.3L catch can kit is a complete bolt-on blow-by solution and includes all necessary components for a hassle-free installation. As with all our products, this kit includes our signature Mishimoto Lifetime Warranty.
Engine oil catch can kit designed to capture oil vapors and prevent buildup in the intake system. Helps maintain efficiency, reduce carbon deposits, and improve performance with durable components and easy installation.- Includes high-quality, fuel and oil-resistant hoses with pre-installed quick-disconnect fittings to make installation easy
- Sturdy 2.7mm-thick steel brackets withstand rough roads and off-road abuse
- Catch can captures blow-by, preventing it from fouling engine oil
-
The classic Ford Bronco is an American icon, a beacon of fun, and a capable off-road vehicle to take you anywhere with the top down and wind blowing. When Ford introduced the new Bronco, it surely kept this spirit alive, but with some much-needed modern-day updates, like getting more than 5 mpg, for example. They achieved this by utilizing the EcoBoost family of engines. As great as the new Bronco is, there is always room for improvement. To give the Bronco some extra pep in its step, we’ve bundled two of our performance intercooler components to make the ultimate air-charge-cooling bundle for your 2.3L EcoBoost! The Mishimoto Performance Intercooler and Intercooler Pipe & Boot Kit bundle improves power and durability compared to the factory intercooler and pipes. The Mishimoto Performance Intercooler features a huge 4.7-inch thick core, CNC-machined 6061 aluminum flanges, and precision tig welded cast aluminum end tanks. Combined, this makes for a robust intercooler that, compared to the plastic end tank factory tube-and-fin intercooler, has far greater durability. More durability is always a good thing, but it’s even better when it’s backed up with performance. The Mishimoto Performance Intercooler and Intercooler Pipe & Boot Kit bundle reduces outlet temperatures by 21.2F and provides an increase in flow of 7% over stock. All of this combined generates gains of 5.68 hp and 5.32 lb-ft of torque. We saw an especially good improvement in our trail simulation heat-soak testing where, after 6 back-to-back dyno runs, we still saw outlet temperatures 20F cooler than stock. What this all means is that in the real world, whether sitting in traffic or out on the trails, you’ll see improvements in performance. All functionality of adaptive cruise control and 360 cameras are retained. As with all of our products, the Mishimoto Performance Intercooler is backed by our signature Mishimoto Lifetime Warranty.
Complete intercooler kit engineered to reduce intake air temperatures for increased power and efficiency. Includes high-quality components for optimal airflow, improved throttle response, and a precise, easy installation.- 21.2 degree reduction in outlet temperature over stock intercooler
- Dyno-proven power gains of 5.68 HP and 5.3 lb.-ft of torque
- 4.7 in thick intercooler design for maximum flow
-
Whether your 2021+ Ford Bronco is a daily driver, or a dedicated trail vehicle, cooling and reliability should be at the top of your list when it comes to modifications. Traffic jams and low-speed trail driving both mean low airflow through your Bronco’s radiator, so you need a radiator that will perform in the toughest conditions.—-The Mishimoto 2021+ Ford Bronco radiator is designed and engineered to withstand anything the road or trail can throw at it. Our all-aluminum end tanks won’t flex and crack like the stock plastic end tanks. Strutted tubes with reinforced leading edges throughout the core resist vibration and impacts, whether from potholes or rocks on the trail. The billet aluminum inlet and outlet of the Mishimoto radiator are precision CNC-machined to be perfectly round, unlike the molded plastic fittings on the stock radiator. The included foam seal ensures smooth airflow through the radiator, while a 15-percent increase in core volume allows that airflow to remove more heat from your engine’s coolant.—-Like all our Bronco performance parts, this 2021+ Ford Bronco aluminum radiator is backed by our Mishimoto Lifetime Warranty for a lifetime of reliability and performance.
Aluminum radiator engineered for efficient heat dissipation and optimal engine cooling. Precision-fit design ensures easy installation, corrosion resistance, and reliable performance across varied driving conditions.- Extruded and strutted tubes protect against vibration and flexing over harsh terrain
- All-aluminum end tanks won’t crack and leak with repeated heat cycles
- CNC-machined inlet and outlet ensure leak-free operation
-
The Bronco is back, and with two options of powerful turbocharged engines, it was born to run free. The larger of the two EcoBoost engines, the 2.7L twin-turbo V6, cranks out 330 horsepower and 415 lb.-ft. of torque, making it capable both on and off-road. But what enthusiast doesn’t want more from their vehicle? We here at Mishimoto are never ones to settle for stock, that’s why we’ve developed this performance intake for your 2021+ Ford Bronco 2.7L EcoBoost. The Mishimoto 2021+ Ford Bronco 2.7L EcoBoost performance intake is construction from rotational molded cross-linked polyethylene. This ultra-strong material allows us to create smooth airflow while effectively keeping engine bay heat out of your intake air. This construction, combined with the 4.5-in high-flow filter and 20% increase in cross-sectional area result in an intake that is nearly 40% less restrictive than stock. To keep the intake flowing through any terrain, we’ve also maintained the stock fresh air inlet, which features a dust trap to protect the air filter from dust and debris. Flow is great, but power is better. Luckily, this Bronco 2.7L EcoBoost intake earns its performance designation. On the stock tune, we were able to put down an extra 7.5 horsepower and 7.4 lb-ft. of torque on the dyno. Combine this intake with our Performance Intercooler Pipes for a free-flowing charge air system. If you’re ready to let your 2021+ Ford Bronco 2.7L EcoBoost breathe as free as it can run, this Mishimoto Performance intake is for you. And, like all Mishimoto products, it’s backed by our Lifetime Warranty, so you can drive easy knowing we’ve got you covered.
Performance cold air intake kit engineered to increase airflow for improved horsepower and throttle response. Includes high-quality components for enhanced filtration, efficient airflow, and a precise fit.- 39.6-percent Less restrictive than stock intake for greater power potential
- 20-percent larger cross-sectional area compared to stock intake tube
- Dyno-proven gains of 7.5 HP and 7.4 lb.-ft. of torque on stock tune
-
The Bronco is back, and with two options of powerful turbocharged engines, it was born to run free. The larger of the two EcoBoost engines, the 2.7L twin-turbo V6, cranks out 330 horsepower and 415 lb.-ft. of torque, making it capable both on and off-road. But what enthusiast doesn’t want more from their vehicle? We here at Mishimoto are never ones to settle for stock, that’s why we’ve developed this performance intake for your 2021+ Ford Bronco 2.7L EcoBoost. The Mishimoto 2021+ Ford Bronco 2.7L EcoBoost performance intake is construction from rotational molded cross-linked polyethylene. This ultra-strong material allows us to create smooth airflow while effectively keeping engine bay heat out of your intake air. This construction, combined with the 4.5-in high-flow filter and 20% increase in cross-sectional area result in an intake that is nearly 40% less restrictive than stock. To keep the intake flowing through any terrain, we’ve also maintained the stock fresh air inlet, which features a dust trap to protect the air filter from dust and debris. Flow is great, but power is better. Luckily, this Bronco 2.7L EcoBoost intake earns its performance designation. On the stock tune, we were able to put down an extra 7.5 horsepower and 7.4 lb-ft. of torque on the dyno. Combine this intake with our Performance Intercooler Pipes for a free-flowing charge air system. If you’re ready to let your 2021+ Ford Bronco 2.7L EcoBoost breathe as free as it can run, this Mishimoto Performance intake is for you. And, like all Mishimoto products, it’s backed by our Lifetime Warranty, so you can drive easy knowing we’ve got you covered.
Performance cold air intake kit engineered to increase airflow for improved horsepower and throttle response. Includes high-quality components for enhanced filtration, efficient airflow, and a precise fit.- 39.6-percent Less restrictive than stock intake for greater power potential
- 20-percent larger cross-sectional area compared to stock intake tube
- Dyno-proven gains of 7.5 HP and 7.4 lb.-ft. of torque on stock tune
-
The Ford Bronco has a heritage of tough, go-anywhere capability. The 2021+ Bronco is no different and deserves a cooling system that can stand up to the task. Here at Mishimoto, we never back down from a challenge, so we developed a performance intercooler to let your 2.3L or 2.7L EcoBoost breathe in the coolest, densest air possible to help improve performance and overall efficiency of heat dissipation, along with being strong enough to handle anything the trail can put in your way. The Mishimoto Performance Intercooler features a 4.7-inch thick core, CNC-machined 6061 aluminum flanges, and precision tig welded cast aluminum end tanks. Combined, this makes for an intercooler that is as robust and ready to take on the world as the Bronco it’s designed for. Compared to the factory tube-and-fin intercooler with plastic end tanks, durability against heat, pressure, and debris on the road or trail is significantly improved over stock. More durability is always a good thing, but it’s even better when it’s backed up with performance. The Mishimoto Performance Intercooler has an increase of 77% core volume and 175% fin surface area, which for the 2.3L EcoBoost, results in an increase in flow of 7% and a reduction of outlet temperatures of 21.2 over stock. These numbers are all well and fine, but what they really mean is that in the real world, whether sitting in traffic or out on the trails, you’ll see improvements in performance. We saw an especially good improvement in our trail simulation heat-soak testing where, after 6 back-to-back dyno runs, we still saw outlet temperatures 20 cooler than stock. All functionality of adaptive cruise control and 360 cameras are retained. As with all of our products, the Mishimoto Performance Intercooler is backed by our signature Mishimoto Lifetime Warranty.
High-efficiency intercooler engineered to reduce intake air temperatures for improved power and engine performance. Durable construction ensures optimal heat exchange, consistent boost, and a precise, reliable fit.- Dyno-proven max gains of 5.7 whp and 5.3 lb-ft torque (2.3L EcoBoost) / 6.5 whp and 6.5 lb-ft torque (2.7L EcoBoost)
- 21.2-degree (2.3L EcoBoost) / 15.8-degree (2.7L EcoBoost) reduction in outlet temperature over stock intercooler
- 7-percent less restrictive than stock intercooler
-
The Ford Bronco has a heritage of tough, go-anywhere capability. The 2021+ Bronco is no different and deserves a cooling system that can stand up to the task. Here at Mishimoto, we never back down from a challenge, so we developed a performance intercooler to let your 2.3L or 2.7L EcoBoost breathe in the coolest, densest air possible to help improve performance and overall efficiency of heat dissipation, along with being strong enough to handle anything the trail can put in your way. The Mishimoto Performance Intercooler features a 4.7-inch thick core, CNC-machined 6061 aluminum flanges, and precision tig welded cast aluminum end tanks. Combined, this makes for an intercooler that is as robust and ready to take on the world as the Bronco it’s designed for. Compared to the factory tube-and-fin intercooler with plastic end tanks, durability against heat, pressure, and debris on the road or trail is significantly improved over stock. More durability is always a good thing, but it’s even better when it’s backed up with performance. The Mishimoto Performance Intercooler has an increase of 77% core volume and 175% fin surface area, which for the 2.3L EcoBoost, results in an increase in flow of 7% and a reduction of outlet temperatures of 21.2 over stock. These numbers are all well and fine, but what they really mean is that in the real world, whether sitting in traffic or out on the trails, you’ll see improvements in performance. We saw an especially good improvement in our trail simulation heat-soak testing where, after 6 back-to-back dyno runs, we still saw outlet temperatures 20 cooler than stock. All functionality of adaptive cruise control and 360 cameras are retained. As with all of our products, the Mishimoto Performance Intercooler is backed by our signature Mishimoto Lifetime Warranty.
High-efficiency intercooler engineered to reduce intake air temperatures for improved power and engine performance. Durable construction ensures optimal heat exchange, consistent boost, and a precise, reliable fit.- Dyno-proven max gains of 5.7 whp and 5.3 lb-ft torque (2.3L EcoBoost) / 6.5 whp and 6.5 lb-ft torque (2.7L EcoBoost)
- 21.2-degree (2.3L EcoBoost) / 15.8-degree (2.7L EcoBoost) reduction in outlet temperature over stock intercooler
- 7-percent less restrictive than stock intercooler
-
Turbocharging and direct-injection are quickly becoming the go-to method for building powerful and efficient trucks. However, if not carefully maintained, they can become a problem for your 2021.5+ Ford F-150 3.5L EcoBoost.—-Direct injection makes the 3.5L EcoBoost one of the most efficient engines ever fitted to the F-150 but, without the benefit of fuel washing over the back of the intake valves, blow-by is free to accumulate in the form of carbon deposits. Eventually, those carbon deposits can choke your engine and reduce its performance. Thankfully, Mishimoto has a solution.—-Mishimoto’s 2021.5+ Ford F-150 3.5L EcoBoost Catch Can Kit protects your intake tract and valves from the harmful effects of blow-by and carbon accumulation. The dual-can setup ensures that blow-by is routed away from your intake and valves in all driving conditions. Our road-proven 12 fl. oz. baffled catch can holds more blow-by for extended service intervals. Whether you’re hard on the throttle or cruising around town, these cans have your engine’s back.—-The powder coated, 3mm-thick steel bracket is strong enough to handle any terrain a work truck, off-roader, or daily driver will see, and the pre-installed quick-disconnect fittings make installation a breeze. Of course, this catch can kit is backed by our Mishimoto Lifetime Warranty so you can rest easy knowing your 2021.5+ F-150 3.5L EcoBoost is protected from blow-by for as long as you own it.
Engine oil catch can kit designed to capture oil vapors and prevent buildup in the intake system. Helps maintain efficiency, reduce carbon deposits, and improve performance with durable components and easy installation.- Dual-can setup captures blow-by from both the PCV and CCV systems
- Patent #US D884,760 S
- N/A
-
Blow-by is an unavoidable side effect of forced induction. When pressurized gases are recirculated through the PCV system, oil particles are carried in that air, which causes your intake system and intake valves to become coated in oil. Over time, this can lead to carbon buildup on valves and reduce octane levels in the combustion chamber by introducing oil to the air/fuel mixture. Direct injection engines, like the L15B7 in your 22+ Honda Civic 1.5T, are prone to harsh carbon buildup on intake valves. The Mishimoto Baffled Oil Catch Can helps prevent these issues by separating that oil mixture from the air returning to your intake system. As air enters the catch can, it flows through the 50-micron bronze filter followed by the air diverter baffle, which helps capture those oily particles and allows them to condense until they become heavy enough to drip into the canister to be collected. This leaves the air flowing back into your intake system clean and ready to be burned again. The kit includes a billet 6061 aluminum can with black CNC-machined aluminum fittings, a direct-fit steel powder-coated bracket, pre-formed application-specific SAE J30R7 hoses, and all required hardware for a clean and tidy installation in thirty minutes or less. This makes maintaining your 2022+ Civic 1.5T system a breeze, as the can is also 100% washable, so you never have to worry about replacing the filtration system. With all our products, this catch can kit is backed by our signature Mishimoto Lifetime Warranty.
Engine oil catch can kit designed to capture oil vapors and prevent buildup in the intake system. Helps maintain efficiency, reduce carbon deposits, and improve performance with durable components and easy installation.- Sturdy, fitment-specific mounting bracket has provisions to secure the factory fuel line
- Separates and captures oil by mounting in-line with the PCV system
- Installs in under thirty minutes
-
Mishimoto Honda Civic radiator hoses are made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. This kit includes upper and lower radiator hoses as well as reservoir tank hoses. Available in black, blue, or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.
Complete radiator coolant hose kit designed to maintain proper coolant flow and system pressure. Includes durable, heat-resistant hoses for leak prevention, reliable performance, and a precise, easy installation.- Constructed from five layers of silicone with heat-resistant embedded fibers
- Kit includes upper and lower radiator hoses as well as reservoir tank hose
- Improves heat and pressure tolerance
-
Update Prod Description for hoses: Mishimoto Honda Civic radiator hoses are made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. This kit includes upper and lower radiator hoses as well as reservoir tank hoses. Available in black, blue, or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.
Complete radiator coolant hose kit designed to maintain proper coolant flow and system pressure. Includes durable, heat-resistant hoses for leak prevention, reliable performance, and a precise, easy installation.- Constructed from five layers of silicone with heat-resistant embedded fibers
- Kit includes upper and lower radiator hoses as well as reservoir tank hose
- Improves heat and pressure tolerance
Showing 21061–21072 of 26357 results