Shop

Injen Technology’s new EVO9302C Cold Air Intake for the 2021-2026 Ford Bronco’s equipped with the 2.7L V6 EcoBoost engine is here and one look at the stats of this intake system and you’ll know that it’s the right choice for your new Bronco. The EVO9302C is a true 3D designed intake system that simply drops-in without any modifications, plus it delivers on those performance gains without the need for additional and expensive engine tuners. Simply install our intake system and you’re set with no check engine lights and no drama!
EVOLUTION Cold Air Intake System, Part No. EVO9302C, 2021-2026 Ford Bronco V6-2.7L Twin Turbo

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Large forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grille
• Secondary Inlet for additional airflow OR to adapt to Injen’s upcoming snorkel system
• Also available with a SuperNano-Web dry air Filter: Intake system P/N EVO9302
• Unlike the competition, the Injen intake tube goes all the way to the turbos
• No Tune Required – Designed to work seamless with the stock calibration
• Custom tapered dual intake tube for increased airflow to both turbos
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 26 hp and 27 lb.-ft. of torque
• Utilizes our patented Twist-Lock Filter attachment system
• Optional Air Filter Cleaning Kit also Available – X-1030
• Stainless steel band clamps with inner protective liner
• Durable XLPE Roto-Molded Polyethylene tube and housing
• Reinforced automotive grade silicone couplers
• Injen Technology Limited Lifetime Warranty
• Replacement air filter # X-1116-BR
• Made in Pomona California, USA

The factory intake tract on the 2022-2024 Honda Civic and 2023-2024 Acura Integra is very restrictive from the factory and limiting power output by choking the turbo. The new Injen SP1586 cold air intake opens up that intake tract with a massive 3.00in aluminum intake tube that transitions into Injen Technology’s patented step-down process called, MegaRam? Technology (or MR Technology? for short). This patented MegaRam? Technology allows the engineers at Injen to fine-tune fuel trims and maximize power output. Directly after the MR Technology? step-down, the system briefly enlarges to 2.50in before entering the factory turbo inlet. This is done to maintain airspeed for improved throttle response. The longer tube found on this cold air intake also promotes increased power across the entire RPM band and not just at the top-end like the majority of short-ram and enclosed systems.
SP Aluminum Series Cold Air Intake System, Part No. SP1586WR, 2022-2024 Honda Civic/Civic Si L4-1.5L (t), 2023-2024 Acura Integra L4-1.5L (t)

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Manufactured from 2.50in and 3.00in Mandrel-Bent 6061-T6 aluminum intake tubing
• Smooth intake piping eliminates restrictions and improves airflow
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional Hydroshield part number 1033BLK or 1033RED
• Injen Front Mount intercooler coming soon: FM1586i
• Injen X-Pedal Throttle Response Controller: PT0018
• Features Injen’s patented MegaRam (MR) Technology
• Provides power gains while maintaining A/F ratios
• Civic Si/Integra – 10 hp and 9 lb-ft. of torque
• Replacement air filter part number X-1014-BB
• No additional and expensive tuning required
• Base Civic ? 10 hp and 11 lb-ft. of torque
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Dyno Proven gains for each Civic model:
• Proudly made in Pomona California, USA
• Available in multiple finishes
• Injen Charge Pipes: SES1586ICP
• True Cold Air Intake Design
• SP1586WB (Wrinkle Black)
• SP1586WR (Wrinkle Red)
• SP1586P (Polished)

The factory intake tract on the 2022-2024 Honda Civic and 2023-2024 Acura Integra is very restrictive from the factory and limiting power output by choking the turbo. The new Injen SP1586 cold air intake opens up that intake tract with a massive 3.00in aluminum intake tube that transitions into Injen Technology’s patented step-down process called, MegaRam? Technology (or MR Technology? for short). This patented MegaRam? Technology allows the engineers at Injen to fine-tune fuel trims and maximize power output. Directly after the MR Technology? step-down, the system briefly enlarges to 2.50in before entering the factory turbo inlet. This is done to maintain airspeed for improved throttle response. The longer tube found on this cold air intake also promotes increased power across the entire RPM band and not just at the top-end like the majority of short-ram and enclosed systems.
SP Aluminum Series Cold Air Intake System, Part No. SP1586P, 2022-2024 Honda Civic/Civic Si L4-1.5L (t), 2023-2024 Acura Integra L4-1.5L (t)

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Manufactured from 2.50in and 3.00in Mandrel-Bent 6061-T6 aluminum intake tubing
• Smooth intake piping eliminates restrictions and improves airflow
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional Hydroshield part number 1033BLK or 1033RED
• Injen Front Mount intercooler coming soon: FM1586i
• Injen X-Pedal Throttle Response Controller: PT0018
• Features Injen’s patented MegaRam (MR) Technology
• Provides power gains while maintaining A/F ratios
• Civic Si/Integra – 10 hp and 9 lb-ft. of torque
• Replacement air filter part number X-1014-BB
• No additional and expensive tuning required
• Base Civic ? 10 hp and 11 lb-ft. of torque
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Dyno Proven gains for each Civic model:
• Proudly made in Pomona California, USA
• Available in multiple finishes
• Injen Charge Pipes: SES1586ICP
• True Cold Air Intake Design
• SP1586WB (Wrinkle Black)
• SP1586WR (Wrinkle Red)
• SP1586P (Polished)

The factory intake tract on the 2022-2024 Honda Civic and 2023-2024 Acura Integra is very restrictive from the factory and limiting power output by choking the turbo. The new Injen SP1586 cold air intake opens up that intake tract with a massive 3.00in aluminum intake tube that transitions into Injen Technology’s patented step-down process called, MegaRam? Technology (or MR Technology? for short). This patented MegaRam? Technology allows the engineers at Injen to fine-tune fuel trims and maximize power output. Directly after the MR Technology? step-down, the system briefly enlarges to 2.50in before entering the factory turbo inlet. This is done to maintain airspeed for improved throttle response. The longer tube found on this cold air intake also promotes increased power across the entire RPM band and not just at the top-end like the majority of short-ram and enclosed systems.
SP Aluminum Series Cold Air Intake System, Part No. SP1586WB, 2022-2024 Honda Civic/Civic Si L4-1.5L (t), 2023-2024 Acura Integra L4-1.5L (t)

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Manufactured from 2.50in and 3.00in Mandrel-Bent 6061-T6 aluminum intake tubing
• Smooth intake piping eliminates restrictions and improves airflow
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional Hydroshield part number 1033BLK or 1033RED
• Injen Front Mount intercooler coming soon: FM1586i
• Injen X-Pedal Throttle Response Controller: PT0018
• Provides power gains while maintaining A/F ratios
• Features Injen’s patented MegaRam (MR) Technology
• Civic Si/Integra – 10 hp and 9 lb-ft. of torque
• Replacement air filter part number X-1014-BB
• No additional and expensive tuning required
• Base Civic ? 10 hp and 11 lb-ft. of torque
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Dyno Proven gains for each Civic model:
• Proudly made in Pomona California, USA
• Available in multiple finishes
• Injen Charge Pipes: SES1586ICP
• True Cold Air Intake Design
• SP1586WB (Wrinkle Black)
• SP1586WR (Wrinkle Red)
• SP1586P (Polished)

The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Hyundai Elantra and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
SP Aluminum Series Cold Air Intake System, Part No. SP1364WB, 2022-2025 Hyundai Elantra N L4-2.0L Turbo (Manual Transmission Only)

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Provides power gains while maintaining A/F ratios: no additional tuning required
• Smooth intake piping eliminates restrictions and improves airflow
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 7 hp and 16 lb.-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Massive 3.250″ 6061-T6 aluminum intake tubing
• Injen Technology Limited Lifetime Warranty
• Aggressive engine tone under full throttle
• Optional Hydroshield part number 1040BLK
• Replacement air filter # X-1059-BB
• Available in Multiple Finishes
• Made in Pomona California, USA
• Wrinkle Black (SP1364WB)
• Wrinkle Red (SP1364WR)
• Polished (SP1364P)

The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Hyundai Elantra and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
SP Aluminum Series Cold Air Intake System, Part No. SP1364WR, 2022-2025 Hyundai Elantra N L4-2.0L Turbo (Manual Transmission Only)

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Provides power gains while maintaining A/F ratios: no additional tuning required
• Smooth intake piping eliminates restrictions and improves airflow
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 7 hp and 16 lb.-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Massive 3.250″ 6061-T6 aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Optional Hydroshield part number 1040BLK
• Replacement air filter # X-1059-BB
• Available in Multiple Finishes
• Made in Pomona California, USA
• Wrinkle Black (SP1364WB)
• Wrinkle Red (SP1364WR)
• Polished (SP1364P)

The SP series of cold air intakes is Injen?s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Kia Stinger and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
SP Aluminum Series Short Ram Air Intake System, Part No. SP1352WB, 2022-2023 Kia Stinger L4-2.5L Turbo

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Massive 4.0in mandrel-bent aluminum tubing for maximum power!
• Dyno Proven gains of up to 18 hp and 20 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Provides power gains while maintaining A/F ratios
• Aggressive engine tone while under full throttle
• Manufactured from 6061-T6 aluminum intake tubing
• Replacement air filter part number X-1070-BB
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1076BLK
• Available in three amazing finishes
• Made in Pomona California, USA
• No additional tuning required
• Short Ram Air Intake Design
• SP1352WB (Wrinkle Black)
• SP1352WR (Wrinkle Red)
• SP1352P (Polished)

The SP series of cold air intakes is Injen?s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Kia Stinger and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
SP Aluminum Series Short Ram Air Intake System, Part No. SP1352WR, 2022-2023 Kia Stinger L4-2.5L Turbo

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Massive 4.0in mandrel-bent aluminum tubing for maximum power!
• Dyno Proven gains of up to 18 hp and 20 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Provides power gains while maintaining A/F ratios
• Manufactured from 6061-T6 aluminum intake tubing
• Aggressive engine tone while under full throttle
• Replacement air filter part number X-1070-BB
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1076BLK
• Available in three amazing finishes
• Made in Pomona California, USA
• No additional tuning required
• Short Ram Air Intake Design
• SP1352WB (Wrinkle Black)
• SP1352WR (Wrinkle Red)
• SP1352P (Polished)

The SP series line of air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. SP series air intakes are Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system, something no other manufacturer can claim. SP series air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patent 7,721,669), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket.
SP Aluminum Series Short Ram Air Intake System, Part No. SP2082WB, 2023-2025 Toyota GR Corolla L3-1.6L Turbo

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Includes easy to follow installation instructions with clear pictures for an easy installation
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Made from 3.50in Mandrel-Bent 6061-T6 aluminum intake tubing
• Dyno Proven gains of up to 20 hp and 25 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Features Injen?s patented MegaRam (MR) Technology
• Provides power gains while maintaining A/F ratios
• Replacement air filter part number X-1079-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California, USA
• Available in multiple finishes
• No additional tuning required
• Short Ram Air Intake Design

The SP series line of air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. SP series air intakes are Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system, something no other manufacturer can claim. SP series air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patent 7,721,669), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket.
SP Aluminum Series Short Ram Air Intake System, Part No. SP2082WR, 2023-2025 Toyota GR Corolla L3-1.6L Turbo

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Includes easy to follow installation instructions with clear pictures for an easy installation
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Made from 3.50in Mandrel-Bent 6061-T6 aluminum intake tubing
• Dyno Proven gains of up to 20 hp and 25 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Features Injen?s patented MegaRam (MR) Technology
• Provides power gains while maintaining A/F ratios
• Replacement air filter part number X-1079-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California, USA
• Available in multiple finishes
• No additional tuning required
• Short Ram Air Intake Design

Step into the world of performance with Injen Technology?s brand-new Evolution Elite air intake system, designed just for the 2024-2026 Toyota Tacoma L4 2.4L Turbo. Our R&D team poured everything into the EVO2201, using advanced CAD and CFD tech to create something that stands out for style, fit, and pure performance. The kit comes with a tough, in-house roto-molded XLPE air box and intake tube, packed with patented features that push the boundaries of what an intake system can do. At the heart of it, our famous SuperNano-Web dry air filter catches even the tiniest contaminants. Everything fits together with premium, automotive-grade hardware, so you get a rock-solid install every time. Honestly, once you try this intake, you?ll never look back. This is the Evolution Elite.
EVOLUTION ELITE Cold Air Intake System, Part No. EVO2201, 2024-2026 Toyota Tacoma L4-2.4L Turbo

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Patented removable magnetic lid can transform intake into an open element system
• Provides power gains while maintaining A/F ratios with no additional tuning
• Integrated air scoop is designed to capture the largest amount of cool air
• High strength, Cross-Link Polyethylene (XLPE) roto-molded construction
• Patented built-in velocity stack for a smoother, accelerated air flow
• Patented magnetic see-through window that eases in filter monitoring
• Meticulously engineered using advanced CAD and CFD technology
• Dyno Proven gains of up to 15 whp and 19 lb-ft of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1046-BB
• Designed to work with the stock calibration
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1053BLK
• Does NOT fit i-Force Max hybrid models
• Available in multiple finish options
• Made in Pomona California, USA

Step into the world of performance with Injen Technology?s brand-new Evolution Elite air intake system, designed just for the 2024-2026 Toyota Tacoma L4 2.4L Turbo. Our R&D team poured everything into the EVO2201, using advanced CAD and CFD tech to create something that stands out for style, fit, and pure performance. The kit comes with a tough, in-house roto-molded XLPE air box and intake tube, packed with patented features that push the boundaries of what an intake system can do. At the heart of it, our famous SuperNano-Web dry air filter catches even the tiniest contaminants. Everything fits together with premium, automotive-grade hardware, so you get a rock-solid install every time. Honestly, once you try this intake, you?ll never look back. This is the Evolution Elite.
EVOLUTION ELITE Cold Air Intake System, Part No. EVO2201, 2024-2026 Toyota Tacoma L4-2.4L Turbo

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Patented removable magnetic lid can transform intake into an open element system
• Provides power gains while maintaining A/F ratios with no additional tuning
• Integrated air scoop is designed to capture the largest amount of cool air
• High strength, Cross-Link Polyethylene (XLPE) roto-molded construction
• Patented built-in velocity stack for a smoother, accelerated air flow
• Patented magnetic see-through window that eases in filter monitoring
• Meticulously engineered using advanced CAD and CFD technology
• Dyno Proven gains of up to 15 whp and 19 lb-ft of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1046-BB
• Designed to work with the stock calibration
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1053BLK
• Does NOT fit i-Force Max hybrid models
• Available in multiple finish options
• Made in Pomona California, USA