-
The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system, something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patent 7,721,669), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket.
SP Short Ram Intake System, Part No. SP2037P, 2018-2022 Toyota Camry L4-2.5L.- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes easy to follow installation instructions with clear pictures for an easy installation
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Made from 3.250in Mandrel-Bent 6061-T6 aluminum intake tubing
- Dyno Proven gains of up to 10 hp and 12 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Features Injen’s patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1063-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Made in Pomona, California, USA
- Available in multiple finishes
- No additional tuning required
- Short Ram Air Intake Design
-
The OE intake tract on the B58 engine is very restrictive from the factory and limiting power output by choking the turbo. Our new SP2300 short ram cold air intake opens up that intake tract with a large 4.0″ aluminum intake tube that allows that turbo and engine to breathe deep and produce the power that you’ve been craving. The Injen Technology Power Package provides an intake growl that will surely excite your senses as you open up your Toyota Supra and let that turbo spool. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
PK Power Package System, Part No. PK2300P, 2020-2023 BMW Z4 L6-3.0L Turbo (M40i), 2020-2023 Toyota GR Supra L6-3.0L Turbo (A90/A91).
Includes SP2300P and SES2300ICP- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Available in Polished (PK2300P), Wrinkle Black (PK2300WB), and Wrinkle Red (PK2300WR)
- Provides power gains while maintaining A/F ratios: no additional tuning required
- Oversized piping reduces restriction providing increased airflow to the engine
- Charge Pipes are from oversized 2.75? Lightweight 6061-T6 Aluminum Piping
- Intake is manufactured from massive 4.00″ 6061-T6 aluminum intake tubing
- Precision CNC machined quick connect flanges for an OE-Style attachment
- Includes custom heat shield specifically designed for this application
- Our aluminum piping replaces the brittle, failure-prone factory unit.
- System includes our SP2300 Cold Air and SES2300ICP Charge Pipes
- Aggressive under hood appearance while maintaining an OE fit
- Dyno Proven gains of up to 19 hp and 23 lb.-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional Hydroshield part number 1037BLK or 1037RED
- Charge Pipes include one 1/8? Female NPT bung
- Aggressive Engine Tone Under Full Throttle
- Injen Technology Limited Lifetime Warranty
- Replacement air filter # X-1026-BB
- Made in Pomona California, USA
-
Injen 19-20 BMW Z4 / 2020 Toyota Supra 3.0L Turbo Intake and Charge Pipe Power Package – Wrinkle Blk
The OE intake tract on the B58 engine is very restrictive from the factory and limiting power output by choking the turbo. Our new SP2300 short ram cold air intake opens up that intake tract with a large 4.0″ aluminum intake tube that allows that turbo and engine to breathe deep and produce the power that you’ve been craving. The Injen Technology Power Package provides an intake growl that will surely excite your senses as you open up your Toyota Supra and let that turbo spool. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
PK Power Package System, Part No. PK2300WB, 2020-2023 BMW Z4 L6-3.0L Turbo (M40i), 2020-2023 Toyota GR Supra L6-3.0L Turbo (A90/A91).
Includes SP2300WB and SES2300ICPWB- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Available in Polished (PK2300P), Wrinkle Black (PK2300WB), and Wrinkle Red (PK2300WR)
- Provides power gains while maintaining A/F ratios: no additional tuning required
- Oversized piping reduces restriction providing increased airflow to the engine
- Charge Pipes are from oversized 2.75? Lightweight 6061-T6 Aluminum Piping
- Intake is manufactured from massive 4.00″ 6061-T6 aluminum intake tubing
- Precision CNC machined quick connect flanges for an OE-Style attachment
- Includes custom heat shield specifically designed for this application
- Our aluminum piping replaces the brittle, failure-prone factory unit.
- System includes our SP2300 Cold Air and SES2300ICP Charge Pipes
- Aggressive under hood appearance while maintaining an OE fit
- Dyno Proven gains of up to 19 hp and 23 lb.-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional Hydroshield part number 1037BLK or 1037RED
- Charge Pipes include one 1/8? Female NPT bung
- Aggressive Engine Tone Under Full Throttle
- Injen Technology Limited Lifetime Warranty
- Replacement air filter # X-1026-BB
- Made in Pomona California, USA
-
Injen 19-20 BMW Z4 / 2020 Toyota Supra 3.0L Turbo Intake and Charge Pipe Power Package – Wrinkle Red
The OE intake tract on the B58 engine is very restrictive from the factory and limiting power output by choking the turbo. Our new SP2300 short ram cold air intake opens up that intake tract with a large 4.0″ aluminum intake tube that allows that turbo and engine to breathe deep and produce the power that you’ve been craving. The Injen Technology Power Package provides an intake growl that will surely excite your senses as you open up your Toyota Supra and let that turbo spool. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
PK Power Package System, Part No. PK2300WR, 2020-2023 BMW Z4 L6-3.0L Turbo (M40i), 2020-2023 Toyota GR Supra L6-3.0L Turbo (A90/A91).
Includes SP2300WR and SES2300ICPWR- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Available in Polished (PK2300P), Wrinkle Black (PK2300WB), and Wrinkle Red (PK2300WR)
- Provides power gains while maintaining A/F ratios: no additional tuning required
- Oversized piping reduces restriction providing increased airflow to the engine
- Charge Pipes are from oversized 2.75? Lightweight 6061-T6 Aluminum Piping
- Intake is manufactured from massive 4.00″ 6061-T6 aluminum intake tubing
- Precision CNC machined quick connect flanges for an OE-Style attachment
- Includes custom heat shield specifically designed for this application
- Our aluminum piping replaces the brittle, failure-prone factory unit.
- System includes our SP2300 Cold Air and SES2300ICP Charge Pipes
- Aggressive under hood appearance while maintaining an OE fit
- Dyno Proven gains of up to 19 hp and 23 lb.-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional Hydroshield part number 1037BLK or 1037RED
- Charge Pipes include one 1/8? Female NPT bung
- Aggressive Engine Tone Under Full Throttle
- Injen Technology Limited Lifetime Warranty
- Replacement air filter # X-1026-BB
- Made in Pomona California, USA
-
Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen’s Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler*. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
Intercooler Pipe; 2.750 in. Lightweitght; 6061-T1 Mandrel-Bent Aluminum Piping; Incl. 1 1/8 in. Female NTP Ports; Automotive Grade Silicone Couplers; Polished;
Intercooler not included- Oversized piping reduces restriction providing increased airflow to the engine
- Precision CNC machined quick connect flanges for an OE-Style attachment
- Our aluminum piping replaces the brittle, failure-prone factory unit.
- Available in Polished, Wrinkle Black, and Wrinkle Red finishes
- Precision CNC machined, and TIG-Welded sensor flanges included
- Includes all necessary hardware for a hassle-free installation
- Manufactured from 2.75? Lightweight 6061-T6 Aluminum Piping
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Unique CNC Machined Injen Logo Plate for a Refined Style
- Stainless Steel Band Clamp with Inner Protective Liner
- Increase Throttle Response and Decreases Turbo Lag
- Injen Technology Limited Lifetime Warranty
- Seamlessly adapts with the OE Intercooler
- Mandrel-Bent Tubing For Increased Flow
- Uses all factory mounting locations
- Automotive Grade Silicone Couplers
- Includes one 1/8? Female NPT bung
- Made in Pomona California, USA
-
Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen’s Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler*. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
Intercooler Pipe; 2.750 in. Lightweitght; 6061-T1 Mandrel-Bent Aluminum Piping; Incl. 1 1/8 in. Female NTP Ports; Automotive Grade Silicone Couplers; Wrinkle Black;
Intercooler not included- Oversized piping reduces restriction providing increased airflow to the engine
- Precision CNC machined quick connect flanges for an OE-Style attachment
- Our aluminum piping replaces the brittle, failure-prone factory unit.
- Includes all necessary hardware for a hassle-free installation
- Available in Polished, Wrinkle Black, and Wrinkle Red finishes
- Precision CNC machined, and TIG-Welded sensor flanges included
- Manufactured from 2.75? Lightweight 6061-T6 Aluminum Piping
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Unique CNC Machined Injen Logo Plate for a Refined Style
- Stainless Steel Band Clamp with Inner Protective Liner
- Increase Throttle Response and Decreases Turbo Lag
- Injen Technology Limited Lifetime Warranty
- Seamlessly adapts with the OE Intercooler
- Mandrel-Bent Tubing For Increased Flow
- Uses all factory mounting locations
- Automotive Grade Silicone Couplers
- Includes one 1/8? Female NPT bung
- Made in Pomona California, USA
-
Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen’s Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler*. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
Intercooler Pipe; 2.750 in. Lightweitght; 6061-T1 Mandrel-Bent Aluminum Piping; Incl. 1 1/8 in. Female NTP Ports; Automotive Grade Silicone Couplers; Wrinkle Red;
Intercooler not included- Oversized piping reduces restriction providing increased airflow to the engine
- Precision CNC machined quick connect flanges for an OE-Style attachment
- Our aluminum piping replaces the brittle, failure-prone factory unit.
- Available in Polished, Wrinkle Black, and Wrinkle Red finishes
- Precision CNC machined, and TIG-Welded sensor flanges included
- Includes all necessary hardware for a hassle-free installation
- Manufactured from 2.75? Lightweight 6061-T6 Aluminum Piping
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Unique CNC Machined Injen Logo Plate for a Refined Style
- Stainless Steel Band Clamp with Inner Protective Liner
- Increase Throttle Response and Decreases Turbo Lag
- Injen Technology Limited Lifetime Warranty
- Seamlessly adapts with the OE Intercooler
- Mandrel-Bent Tubing For Increased Flow
- Uses all factory mounting locations
- Automotive Grade Silicone Couplers
- Includes one 1/8? Female NPT bung
- Made in Pomona California, USA
-
Injen’s all new Evolution series sealed cold air intake system for the 2019-2025 GM Trucks and SUVs is quite literally unmatched in the aftermarket. The EVO7104 is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. On top of that beautiful housing is our Clear-View window for easy filter inspection. This window has an eye-catching red stripe with a white Injen logo that really pops when you open your hood. The EVO7104 housing encloses an Injen SuperNano-Web dry air filter utilizing our patented Twist-Lock technology for a simple install and clean looks. Injen’s EVO7104 comes with all the necessary hardware to provide a simple and fast installation. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS straight out of the box.
EVOLUTION Cold Air Intake System, Part No. EVO7104, 2019-2025 GM 1500 Truck & SUV V8-5.3L/6.2L.- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Also available with a 8-Layer Oiled Air FIlter: Intake system P/N EVO7104C
- Aggressive under hood appearance while maintaining an OE fit
- Features Injen’s patented internal MegaRam (MR) Technology
- Utilizes our patented Twist-Lock Filter attachment system
- Dyno Proven gains of up to 13 hp and 14 lb-ft. of torque
- Injen Clear-View badge for simple air filter inspection
- Stainless steel band clamps with inner protective liner
- Durable XLPE Roto-Molded Polyethylene tube and housing
- Fully serviceable Injen SuperNano-Web dry air filter
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1107-BB
- Designed to work with the stock calibration
- Injen Technology Limited Lifetime Warranty
- Optional hydroshield part number 1119BLK
- Made in Pomona California, USA
-
Injen’s all new Evolution series sealed cold air intake system for the 2019-2025 GM Trucks and SUVs is quite literally unmatched in the aftermarket. The EVO7104C is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. On top of that beautiful housing is our Clear-View window for easy filter inspection. This window has an eye-catching red stripe with a white Injen logo that really pops when you open your hood. The EVO7104C housing encloses an Injen 8-Layer oiled cotton gauze air filter utilizing our patented Twist-Lock technology for a simple install and clean looks. Injen’s EVO7104C comes with all necessary hardware to provide a simple and fast installation. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS straight out of the box.
EVOLUTION Cold Air Intake System, Part No. EVO7104C, 2019-2025 GM 1500 Truck & SUV V8-5.3L/6.2L.- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Also available with our dry Air FIlter: Intake system P/N EVO7104
- Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
- Aggressive under hood appearance while maintaining an OE fit
- Features Injen’s patented internal MegaRam (MR) Technology
- Utilizes our patented Twist-Lock Filter attachment system
- Dyno Proven gains of up to 13 hp and 14 lb-ft. of torque
- Injen Clear-View badge for simple air filter inspection
- Stainless steel band clamps with inner protective liner
- Durable XLPE Roto-Molded Polyethylene tube and housing
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1107-BR
- Designed to work with the stock calibration
- Injen Technology Limited Lifetime Warranty
- Optional hydroshield part number 1119BLK
- Made in Pomona California, USA
-
Does your ride need some excitement added to it? Of course it does and why would that ever be a question?! Well, you’re in luck because the engineers at Injen Technology have you covered. Check out this Injen PowerFlow (PF) intake to fulfill all of your horsepower desires. The Injen PF cold air intakes have dyno proven power gains that don’t lie. The 6061-T6 aluminum tubing offers superior airflow and styling, plus it’s available with multiple finish options, allowing you to choice on the finished look inside your engine bay. Injen likes to keep things cool, so the air filter is positioned in the best possible location to keep that unwanted hot air from entering your intake. This helps drop air intake temperatures and feed cool, dense air to that hungry engine. This Injen PF intake kit includes everything that is required for a direct-fit installation. Just like all of Injen’s cold air intake systems, this PF Cold air Intake kit includes the unbeatable Injen limited Lifetime Warranty. Rest assured that all of your Injen parts are performing perfectly for as long as you own them!
Power-Flow Air Intake System; Incl. Tubing/Filter/Hardware/Instruction; HP Gains +14 HP/Torque Gains +13 ft./lbs.; Wrinkle Black;- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Provides power gains while maintaining A/F ratios with no additional tuning
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Available with multiple finish options (select applications)
- Dyno Proven gains of up to 14 hp and 13 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1037BLK or 1037RED
- Replacement air filter part number X-1102-BB
- Injen Technology Limited Lifetime Warranty
- Aggressive engine tone under full throttle
- 6061-T6 aluminum intake tubing
- Made in Pomona California, USA
-
Is your 2019-2020 Volkswagen Jetta 1.4L Turbo engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP3031 cold air intake from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. , , The soul of this intake is found within our 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket.
Short Ram Air Intake System; Incl. Tubing/SuperNano-Web Dry Filter/Hardware/Instruction; HP Gains +6 HP/Torque Gains +7 ft./lbs.; Polished;- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 6 hp and 7 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1013-BB
- Injen Technology Limited Lifetime Warranty
- Aggressive engine tone under full throttle
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona California, USA
- No additional tuning required
- Short Ram Air Intake Design
-
Is your 2019-2020 Volkswagen Jetta 1.4L Turbo engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP3031 cold air intake from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. , , The soul of this intake is found within our 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket.
Short Ram Air Intake System; Incl. Tubing/SuperNano-Web Dry Filter/Hardware/Instruction; HP Gains +6 HP/Torque Gains +7 ft./lbs.; Wrinkle Black;- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 6 hp and 7 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1013-BB
- Injen Technology Limited Lifetime Warranty
- Aggressive engine tone under full throttle
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona California, USA
- No additional tuning required
- Short Ram Air Intake Design
Showing 20269–20280 of 31031 results