Shop

You already have the sporty 2019-2020 Hyundai Veloster N and now you’re hunting for additional power? If so, Injen has exciting news for you! The SP1343 short ram cold air intake system from Injen Technology will help that L4-2.0L turbo engine found in the Veloster N breathe easier and provide the additional performance that you’ve been craving. The Injen Technology engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow and a look that will impress every time you open your hood! Additionally, this SP1343 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen SP performance cold air intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in multiple finishes – SP1343P for a high luster polished finish or our SP1343BLK for our laser black coated finish. To top it all off, this SP1343 short ram cold air intake system includes the unbeatable Injen Technology limited Lifetime Warranty!
Short Ram Air Intake System; Incl. Tubing/SuperNano-Web Dry Filter/Hardware/Instruction; w/MR Technology; HP Gains +11 HP/Torque Gains +13 ft./lbs.; Black;

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Dyno Proven gains of up to 11 hp and 13 lb-ft. of torque
• Available with a polished or Black powder coated finish
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1037BLK or 1037RED
• Replacement air filter part number X-1021-BB
• T6-6061 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made In Pomona California; USA
• Made in Pomona, California USA

You already have the sporty 2019-2020 Hyundai Veloster N and now you’re hunting for additional power? If so, Injen has exciting news for you! The SP1343 short ram cold air intake system from Injen Technology will help that L4-2.0L turbo engine found in the Veloster N breathe easier and provide the additional performance that you’ve been craving. The Injen Technology engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow and a look that will impress every time you open your hood! Additionally, this SP1343 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen SP performance cold air intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in multiple finishes – SP1343P for a high luster polished finish or our SP1343BLK for our laser black coated finish. To top it all off, this SP1343 short ram cold air intake system includes the unbeatable Injen Technology limited Lifetime Warranty!
Short Ram Air Intake System; Incl. Tubing/SuperNano-Web Dry Filter/Hardware/Instruction; w/MR Technology; HP Gains +11 HP/Torque Gains +13 ft./lbs.; Polished;

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Dyno Proven gains of up to 11 hp and 13 lb-ft. of torque
• Available with a polished or Black powder coated finish
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1037BLK or 1037RED
• Replacement air filter part number X-1021-BB
• T6-6061 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made In Pomona California; USA
• Made in Pomona, California USA

XLPE Roto-molded Intake Tube: The EVO2300 Evolution Air Intake System uses a custom designed and dyno-tuned, intake tube to produce huge power gains while retaining an OE quality fit. The specially tapered tube starts out at a huge 5 inches and slowly tapers down to 3.5 inches to ensure massive airflow at the turbo inlet. We have also incorporated our internal MegaRam (MR) technology for safe and effective power gains. Our intake tube also incorporates a custom CNC-Machined mounting flange that imitates the stock attachment method. This positive attachment method ensures that your intake remains securely attached to the turbo without fear of it slipping off like our competitor’s rubber couplers.
Evolution Series Air Induction System; Incl. XLPE Roto-Molded Housing And Intake Tube/SuperNano-Web Dry Filter/Hardware; HP Gains +18 HP/Torque Gains +26 ft./lbs. ;

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Custom CNC machined adapter imitates how the stock tube attaches to turbo, thus preventing rubber couplers from popping off like our competition
• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Specially designed intake tube that transitions from 5in OD to 3.5in to increase airflow velocity at the turbo inlet
• Custom Heatshield in front of the turbo protects the intake from excessive heat soak
• Aggressive under hood appearance while maintaining an OE fit
• Features Injen?s patented internal MegaRam (MR) Technology
• Utilizes our patented Twist-Lock Filter attachment system
• Dyno Proven gains of up to 18 hp and 26 lb.-ft. of torque
• Stainless steel band clamps with inner protective liner
• Durable XLPE Roto-Molded Polyethylene tube and housing
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1118BLK
• Replacement air filter # X-1093-BB
• Made in Pomona California, USA

The all-new 2020 Toyota GR Supra with the L6-3.0L turbo engine is a beast from the factory, so the engineers at Injen Technology needed to design an intake that packed a serious punch to keep up with this athletic and sophisticated performer. The R&D team took the new Toyota Supra deep into the lab to extract the hidden power lurking under the hood. From start to finish, each aspect of Injen Technology’s traditional aluminum Cold Air Intake for the 2020 Toyota GR Supra was a true labor of love. The Injen SP2300 cold air intake has the cleanest installation on the market that is also available in multiple finishes for that personized look. The OE intake tract on the A90 Supra is very restrictive from the factory and limiting power output by choking the turbo. Our new SP2300 short ram cold air intake opens up that intake tract with a large 4.0″ aluminum intake tube that allows that turbo and engine to breathe deep and produce the power that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Toyota Supra and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
Cold Air Intake System; Incl. Tubing/Filter/Hardware/Instruction; w/MR Technology; Converts To Short Ram; HP Gains +15.0 HP/Torque Gains +17.0 ft. lbs.; Wrinkle Black;

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Available in Polished (SP2300P), Wrinkle Black (SP2300WB), and Wrinkle Red (SP2300WR)
• Provides power gains while maintaining A/F ratios: no additional tuning required
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 15 hp and 17 lb.-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional Hydroshield part number 1037BLK or 1037RED
• Massive 4.00″ 6061-T6 aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Replacement air filter # X-1026-BB
• Made in Pomona California, USA
• Stainless Steel Band Clamps

The all-new 2020 Toyota GR Supra with the L6-3.0L turbo engine is a beast from the factory, so the engineers at Injen Technology needed to design an intake that packed a serious punch to keep up with this athletic and sophisticated performer. The R&D team took the new Toyota Supra deep into the lab to extract the hidden power lurking under the hood. From start to finish, each aspect of Injen Technology’s traditional aluminum Cold Air Intake for the 2020 Toyota GR Supra was a true labor of love. The Injen SP2300 cold air intake has the cleanest installation on the market that is also available in multiple finishes for that personized look. The OE intake tract on the A90 Supra is very restrictive from the factory and limiting power output by choking the turbo. Our new SP2300 short ram cold air intake opens up that intake tract with a large 4.0″ aluminum intake tube that allows that turbo and engine to breathe deep and produce the power that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Toyota Supra and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
Cold Air Intake System; Incl. Tubing/Filter/Hardware/Instruction; w/MR Technology; Converts To Short Ram; HP Gains +15.0 HP/Torque Gains +17.0 ft. lbs.; Polished;

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Available in Polished (SP2300P), Wrinkle Black (SP2300WB), and Wrinkle Red (SP2300WR)
• Provides power gains while maintaining A/F ratios: no additional tuning required
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 15 hp and 17 lb.-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional Hydroshield part number 1037BLK or 1037RED
• Massive 4.00″ 6061-T6 aluminum intake tubing
• Injen Technology Limited Lifetime Warranty
• Aggressive engine tone under full throttle
• Replacement air filter # X-1026-BB
• Made in Pomona California, USA
• Stainless Steel Band Clamps

The all-new 2020 Toyota GR Supra with the L6-3.0L turbo engine is a beast from the factory, so the engineers at Injen Technology needed to design an intake that packed a serious punch to keep up with this athletic and sophisticated performer. The R&D team took the new Toyota Supra deep into the lab to extract the hidden power lurking under the hood. From start to finish, each aspect of Injen Technology’s traditional aluminum Cold Air Intake for the 2020 Toyota GR Supra was a true labor of love. The Injen SP2300 cold air intake has the cleanest installation on the market that is also available in multiple finishes for that personized look. The OE intake tract on the A90 Supra is very restrictive from the factory and limiting power output by choking the turbo. Our new SP2300 short ram cold air intake opens up that intake tract with a large 4.0″ aluminum intake tube that allows that turbo and engine to breathe deep and produce the power that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Toyota Supra and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
Cold Air Intake System; Incl. Tubing/Filter/Hardware/Instruction; w/MR Technology; Converts To Short Ram; HP Gains +15.0 HP/Torque Gains +17.0 ft. lbs.; Wrinkle Red;

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Available in Polished (SP2300P), Wrinkle Black (SP2300WB), and Wrinkle Red (SP2300WR)
• Provides power gains while maintaining A/F ratios: no additional tuning required
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 15 hp and 17 lb.-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional Hydroshield part number 1037BLK or 1037RED
• Massive 4.00″ 6061-T6 aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque Up To 9.3 ft./lbs.
• Replacement air filter # X-1026-BB
• Made in Pomona California, USA

Injen Technology’s new EVO9300 Cold Air Intake for the 2021-2024 Ford Bronco’s equipped with the 2.3L EcoBoost engine is here and one look at the stats of this intake system and you’ll know that it’s the right choice for your new Bronco. The EVO9300 is a true 3D designed intake system that simply drops-in without any modifications, plus it delivers on those performance gains without the need for additional and expensive engine tuners. Simply install our intake system and you’re set with no check engine lights and no drama!
EVOLUTION Cold Air Intake System, Part No. EVO9300, 2021-2024 Ford Bronco L4-2.3L Turbo

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Large forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grille
• Secondary Inlet for additional airflow OR to adapt to Injen’s upcoming snorkel system
• Massive intake tube that tapers down from 5in OD to 3.5in for increased airflow
• Unlike the competition, the Injen intake tube goes all the way to the turbo
• Also available with a 8-Layer Oiled Air Filter: Intake system P/N EVO9300C
• No Tune Required – Designed to work seamless with the stock calibration
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 13 hp and 13 lb.-ft. of torque
• Utilizes our patented Twist-Lock Filter attachment system
• Stainless steel band clamps with inner protective liner
• Durable XLPE Roto-Molded Polyethylene tube and housing
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Injen Technology Limited Lifetime Warranty
• Replacement air filter # X-1116-BB
• Made in Pomona California, USA

Injen Technology’s new EVO9300C Cold Air Intake for the 2021-2024 Ford Bronco’s equipped with the 2.3L EcoBoost engine is here and one look at the stats of this intake system and you’ll know that it’s the right choice for your new Bronco. The EVO9300C is a true 3D designed intake system that simply drops-in without any modifications, plus it delivers on those performance gains without the need for additional and expensive engine tuners. Simply install our intake system and you’re set with no check engine lights and no drama!
EVOLUTION Cold Air Intake System, Part No. EVO9300C, 2021-2024 Ford Bronco L4-2.3L Turbo

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Large forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grille
• Secondary Inlet for additional airflow OR to adapt to Injen’s upcoming snorkel system
• Massive intake tube that tapers down from 5in OD to 3.5in for increased airflow
• Unlike the competition, the Injen intake tube goes all the way to the turbo
• No Tune Required – Designed to work seamless with the stock calibration
• Also available with a Dry Air Filter: Intake system P/N EVO9300
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze air filter
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 13 hp and 13 lb.-ft. of torque
• Utilizes our patented Twist-Lock Filter attachment system
• Optional Injen air filter cleaning kit part number X-1030
• Stainless steel band clamps with inner protective liner
• Durable XLPE Roto-Molded Polyethylene tube and housing
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1116-BR
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA

Injen Technology’s new EVO9301 Cold Air Intake for the 2021-2022 Ford Bronco’s equipped with the 2.7L V6 EcoBoost engine is here and one look at the stats of this intake system and you’ll know that it’s the right choice for your new Bronco. The EVO9301 is a true 3D designed intake system that simply drops-in without any modifications, plus it delivers on those performance gains without the need for additional and expensive engine tuners. Simply install our intake system and you’re set with no check engine lights and no drama!
EVOLUTION Cold Air Intake System, Part No. EVO9301, 2021-2022 Ford Bronco V6-2.7L Twin Turbo

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Large forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grille
• Secondary Inlet for additional airflow OR to adapt to Injen’s upcoming snorkel system
• Unlike the competition, the Injen intake tubes goes all the way to the turbos
• Also available with a 8-Layer Oiled Air Filter: Intake system P/N EVO9301C
• No Tune Required – Designed to work seamless with the stock calibration
• Custom tapered dual intake tube for increased airflow to both turbos
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 26 hp and 27 lb.-ft. of torque
• Utilizes our patented Twist-Lock Filter attachment system
• Stainless steel band clamps with inner protective liner
• Durable XLPE Roto-Molded Polyethylene tube and housing
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Injen Technology Limited Lifetime Warranty
• Replacement air filter # X-1116-BB
• Made in Pomona California, USA

Injen Technology’s new EVO9301C Cold Air Intake for the 2021-2022 Ford Bronco’s equipped with the 2.7L V6 EcoBoost engine is here and one look at the stats of this intake system and you’ll know that it’s the right choice for your new Bronco. The EVO9301C is a true 3D designed intake system that simply drops-in without any modifications, plus it delivers on those performance gains without the need for additional and expensive engine tuners. Simply install our intake system and you’re set with no check engine lights and no drama!
EVOLUTION Cold Air Intake System, Part No. EVO9301C, 2021-2022 Ford Bronco V6-2.7L Twin Turbo

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Large forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grille
• Secondary Inlet for additional airflow OR to adapt to Injen’s upcoming snorkel system
• Unlike the competition, the Injen intake tubes goes all the way to the turbos
• Also available with a SuperNano-Web dry air Filter: Intake system P/N EVO9301
• No Tune Required – Designed to work seamless with the stock calibration
• Custom tapered dual intake tube for increased airflow to both turbos
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 26 hp and 27 lb.-ft. of torque
• Utilizes our patented Twist-Lock Filter attachment system
• Optional Air Filter Cleaning Kit also Available – X-1030
• Stainless steel band clamps with inner protective liner
• Durable XLPE Roto-Molded Polyethylene tube and housing
• Reinforced automotive grade silicone couplers
• Injen Technology Limited Lifetime Warranty
• Replacement air filter # X-1116-BR
• Made in Pomona California, USA

The SP series of cold air intakes is Injen?s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Kia Stinger and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
SP Aluminum Series Short Ram Air Intake System, Part No. SP1352P, 2022-2023 Kia Stinger L4-2.5L Turbo

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Massive 4.0in mandrel-bent aluminum tubing for maximum power!
• Dyno Proven gains of up to 18 hp and 20 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Provides power gains while maintaining A/F ratios
• Manufactured from 6061-T6 aluminum intake tubing
• Aggressive engine tone while under full throttle
• Replacement air filter part number X-1070-BB
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1076BLK
• Available in three amazing finishes
• Made in Pomona California, USA
• No additional tuning required
• Short Ram Air Intake Design
• SP1352WB (Wrinkle Black)
• SP1352WR (Wrinkle Red)
• SP1352P (Polished)