-
Injen Technology’s new EVO9300 Cold Air Intake for the 2021-2024 Ford Bronco’s equipped with the 2.3L EcoBoost engine is here and one look at the stats of this intake system and you’ll know that it’s the right choice for your new Bronco. The EVO9300 is a true 3D designed intake system that simply drops-in without any modifications, plus it delivers on those performance gains without the need for additional and expensive engine tuners. Simply install our intake system and you’re set with no check engine lights and no drama!
EVOLUTION Cold Air Intake System, Part No. EVO9300, 2021-2024 Ford Bronco L4-2.3L Turbo- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
- Large forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grille
- Secondary Inlet for additional airflow OR to adapt to Injen’s upcoming snorkel system
- Massive intake tube that tapers down from 5in OD to 3.5in for increased airflow
- Unlike the competition, the Injen intake tube goes all the way to the turbo
- Also available with a 8-Layer Oiled Air Filter: Intake system P/N EVO9300C
- No Tune Required – Designed to work seamless with the stock calibration
- Aggressive under hood appearance while maintaining an OE fit
- Dyno Proven gains of up to 13 hp and 13 lb.-ft. of torque
- Utilizes our patented Twist-Lock Filter attachment system
- Stainless steel band clamps with inner protective liner
- Durable XLPE Roto-Molded Polyethylene tube and housing
- Fully serviceable Injen SuperNano-Web dry air filter
- Reinforced automotive grade silicone couplers
- Injen Technology Limited Lifetime Warranty
- Replacement air filter # X-1116-BB
- Made in Pomona California, USA
-
Injen Technology’s new EVO9300C Cold Air Intake for the 2021-2024 Ford Bronco’s equipped with the 2.3L EcoBoost engine is here and one look at the stats of this intake system and you’ll know that it’s the right choice for your new Bronco. The EVO9300C is a true 3D designed intake system that simply drops-in without any modifications, plus it delivers on those performance gains without the need for additional and expensive engine tuners. Simply install our intake system and you’re set with no check engine lights and no drama!
EVOLUTION Cold Air Intake System, Part No. EVO9300C, 2021-2024 Ford Bronco L4-2.3L Turbo- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
- Large forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grille
- Secondary Inlet for additional airflow OR to adapt to Injen’s upcoming snorkel system
- Massive intake tube that tapers down from 5in OD to 3.5in for increased airflow
- Unlike the competition, the Injen intake tube goes all the way to the turbo
- No Tune Required – Designed to work seamless with the stock calibration
- Also available with a Dry Air Filter: Intake system P/N EVO9300
- Fully serviceable Injen 8-Layer Oiled Cotton Gauze air filter
- Aggressive under hood appearance while maintaining an OE fit
- Dyno Proven gains of up to 13 hp and 13 lb.-ft. of torque
- Utilizes our patented Twist-Lock Filter attachment system
- Optional Injen air filter cleaning kit part number X-1030
- Stainless steel band clamps with inner protective liner
- Durable XLPE Roto-Molded Polyethylene tube and housing
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1116-BR
- Injen Technology Limited Lifetime Warranty
- Made in Pomona California, USA
-
Injen Technology’s new EVO9301 Cold Air Intake for the 2021-2022 Ford Bronco’s equipped with the 2.7L V6 EcoBoost engine is here and one look at the stats of this intake system and you’ll know that it’s the right choice for your new Bronco. The EVO9301 is a true 3D designed intake system that simply drops-in without any modifications, plus it delivers on those performance gains without the need for additional and expensive engine tuners. Simply install our intake system and you’re set with no check engine lights and no drama!
EVOLUTION Cold Air Intake System, Part No. EVO9301, 2021-2022 Ford Bronco V6-2.7L Twin Turbo- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
- Large forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grille
- Secondary Inlet for additional airflow OR to adapt to Injen’s upcoming snorkel system
- Unlike the competition, the Injen intake tubes goes all the way to the turbos
- Also available with a 8-Layer Oiled Air Filter: Intake system P/N EVO9301C
- No Tune Required – Designed to work seamless with the stock calibration
- Custom tapered dual intake tube for increased airflow to both turbos
- Aggressive under hood appearance while maintaining an OE fit
- Dyno Proven gains of up to 26 hp and 27 lb.-ft. of torque
- Utilizes our patented Twist-Lock Filter attachment system
- Stainless steel band clamps with inner protective liner
- Durable XLPE Roto-Molded Polyethylene tube and housing
- Fully serviceable Injen SuperNano-Web dry air filter
- Reinforced automotive grade silicone couplers
- Injen Technology Limited Lifetime Warranty
- Replacement air filter # X-1116-BB
- Made in Pomona California, USA
-
Injen Technology’s new EVO9301C Cold Air Intake for the 2021-2022 Ford Bronco’s equipped with the 2.7L V6 EcoBoost engine is here and one look at the stats of this intake system and you’ll know that it’s the right choice for your new Bronco. The EVO9301C is a true 3D designed intake system that simply drops-in without any modifications, plus it delivers on those performance gains without the need for additional and expensive engine tuners. Simply install our intake system and you’re set with no check engine lights and no drama!
EVOLUTION Cold Air Intake System, Part No. EVO9301C, 2021-2022 Ford Bronco V6-2.7L Twin Turbo- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
- Large forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grille
- Secondary Inlet for additional airflow OR to adapt to Injen’s upcoming snorkel system
- Unlike the competition, the Injen intake tubes goes all the way to the turbos
- Also available with a SuperNano-Web dry air Filter: Intake system P/N EVO9301
- No Tune Required – Designed to work seamless with the stock calibration
- Custom tapered dual intake tube for increased airflow to both turbos
- Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
- Aggressive under hood appearance while maintaining an OE fit
- Dyno Proven gains of up to 26 hp and 27 lb.-ft. of torque
- Utilizes our patented Twist-Lock Filter attachment system
- Optional Air Filter Cleaning Kit also Available – X-1030
- Stainless steel band clamps with inner protective liner
- Durable XLPE Roto-Molded Polyethylene tube and housing
- Reinforced automotive grade silicone couplers
- Injen Technology Limited Lifetime Warranty
- Replacement air filter # X-1116-BR
- Made in Pomona California, USA
-
The SP series of cold air intakes is Injen?s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Kia Stinger and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
SP Aluminum Series Short Ram Air Intake System, Part No. SP1352P, 2022-2023 Kia Stinger L4-2.5L Turbo- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Massive 4.0in mandrel-bent aluminum tubing for maximum power!
- Dyno Proven gains of up to 18 hp and 20 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Provides power gains while maintaining A/F ratios
- Manufactured from 6061-T6 aluminum intake tubing
- Aggressive engine tone while under full throttle
- Replacement air filter part number X-1070-BB
- Injen Technology Limited Lifetime Warranty
- Optional hydroshield part number 1076BLK
- Available in three amazing finishes
- Made in Pomona California, USA
- No additional tuning required
- Short Ram Air Intake Design
- SP1352WB (Wrinkle Black)
- SP1352WR (Wrinkle Red)
- SP1352P (Polished)
-
The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides our signature intake growl that will surely excite your senses as you open your Volkswagen GTI and let that turbo spool. The soul of this intake is found within our 3.500in air intake tubing that is manufactured from premium grade 6061-T6 aluminum. That massive intake tube provides a smooth uninterrupted path for highly efficient airflow and maximum power gains. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
SP Aluminum Series Short Ram Air Intake System, Part No. SP3000P, 2022-2024 Volkswagen GTI L4-2.0L (t)- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Available in multiple finishes- Polished, Wrinkle Black, and Wrinkle Red
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 12 hp and 22 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1079-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Optional hydroshield part number 1121BLK
- 6061-T6 aluminum intake tubing
- Made in Pomona California, USA
- No additional tuning required
- Short Ram Air Intake Design
-
The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides our signature intake growl that will surely excite your senses as you open your Volkswagen GTI and let that turbo spool. The soul of this intake is found within our 3.500in air intake tubing that is manufactured from premium grade 6061-T6 aluminum. That massive intake tube provides a smooth uninterrupted path for highly efficient airflow and maximum power gains. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
SP Aluminum Series Short Ram Air Intake System, Part No. SP3000WB, 2022-2024 Volkswagen GTI L4-2.0L (t)- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Available in multiple finishes- Polished, Wrinkle Black, and Wrinkle Red
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 12 hp and 22 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1079-BB
- Injen Technology Limited Lifetime Warranty
- Aggressive engine tone under full throttle
- Optional hydroshield part number 1121BLK
- Made in Pomona California, USA
- 6061-T6 aluminum intake tubing
- No additional tuning required
- Short Ram Air Intake Design
-
The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides our signature intake growl that will surely excite your senses as you open your Volkswagen GTI and let that turbo spool. The soul of this intake is found within our 3.500in air intake tubing that is manufactured from premium grade 6061-T6 aluminum. That massive intake tube provides a smooth uninterrupted path for highly efficient airflow and maximum power gains. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
SP Aluminum Series Short Ram Air Intake System, Part No. SP3000WR, 2022-2024 Volkswagen GTI L4-2.0L (t)- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Available in multiple finishes- Polished, Wrinkle Black, and Wrinkle Red
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 12 hp and 22 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1079-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Optional hydroshield part number 1121BLK
- 6061-T6 aluminum intake tubing
- Made in Pomona California, USA
- No additional tuning required
- Short Ram Air Intake Design
-
The SP series line of air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. SP series air intakes are Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system, something no other manufacturer can claim. SP series air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patent 7,721,669), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket.
SP Aluminum Series Short Ram Air Intake System, Part No. SP2082P, 2023-2025 Toyota GR Corolla L3-1.6L Turbo- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes easy to follow installation instructions with clear pictures for an easy installation
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Made from 3.50in Mandrel-Bent 6061-T6 aluminum intake tubing
- Dyno Proven gains of up to 20 hp and 25 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Features Injen?s patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1079-BB
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Made in Pomona, California, USA
- Available in multiple finishes
- No additional tuning required
- Short Ram Air Intake Design
-
Being able to have increased clearance is nice, but let’s face it, we all buy exhaust systems to improve the sound of our vehicle and Injen Technology doesn’t disappoint! The Injen Technology engineers designed a custom dual muffler system that would provide great sound with the both the L4-2.7 Turbo and also the V6-2.7L Twin Turbo, which is no easy feat. The SES9300AB exhaust system is also made from mandrel-bent 304 stainless steel and not the lesser quality 409 Stainless like our competition uses. This provides you with an exhaust that not only looks great, but will last you a lifetime.
High Tuck Axle Back Exhaust System, Part No. SES9300AB, 2021-2024 Ford Bronco L4-2.3L Turbo / V6-2.7L Twin Turbo- Note: This part is not an emissions-related part and therefore can be used on Emission Controlled Vehicles without a CARB EO#
- High Tuck design for increased ground clearance on approach and departure angles
- Oversized tubing reduces restriction providing increased airflow and performance
- Custom investment cast Y-Pipe equalizes flow for improved performance and sound
- Includes Injen’s dual oval, straight-through mufflers for our signature sound
- Manufactured from huge 3.0in (76mm) mandrel-bent 304 stainless-steel tubing
- Can be used with the stock exhaust OR with Injen’s Mid-Pipe P/N: SES9300MP
- Hand Crafted and TIG Welded to Perfection for Strength and Durability
- Uses all factory mounting locations with factory-style hangers
- Includes all necessary hardware for a hassle-free installation
- Tip extensions can be removed for improved departure angle
- Fits both 2-door and 4-door models without modifications
- Dyno Proven gains of up to 9 hp and 10 lb-ft. of torque
- Dual 4.0in (101.6mm) bolt-on black ceramic exhaust tips
- Increase Throttle Response and Decreases Turbo Lag
- High-tuck design for increased ground clearance
- Injen Technology Limited Lifetime Warranty
- Designed and manufactured in Pomona, CA
- Axle-Back design
- EMISSIONS
-
Injen Technology designs every performance product with ease of installation in mind and this exhaust is no different. On the SES9300 we’ve included V-Band clamps and flanges for the simplest, quickest installation possible. No need for any cutting, drilling, or modification of the vehicle to complete installation. The system uses all factory mounting points for simple and convenient placement and compatibility. To increase performance, we opted for a single 3.00in (76mm) pipe size from flange to tips to keep flow rates consistent. Keeping the flow rate consistent not only adds performance but also helps keep the tone of the exhaust where we designed it to be throughout the RPM range.
Performance Exhaust System, Part No. SES9300, 2021-2024 Ford Bronco L4-2.3L Turbo / V6-2.7L Twin Turbo- This part is not an emissions-related part and therefore can be used on Emission Controlled Vehicles without a CARB EO#.
- Oversized tubing reduces restriction providing increased airflow and performance
- Custom investment cast Y-Pipe equalizes flow for improved performance and sound
- Includes Injen’s dual oval, straight-through mufflers for our signature sound
- Manufactured from huge 3.0in (76mm) mandrel-bent 304 stainless-steel tubing
- Dyno Proven power increase of 10 HP and 11 Lb.-Ft. of torque at the wheels
- Hand Crafted and TIG Welded to Perfection for Strength and Durability
- Beautiful V-Band clamps used for a simple, leak-free installation
- Uses all factory mounting locations with factory-style hangers
- Includes all necessary hardware for a hassle-free installation
- Tip extensions can be removed for improved departure angle
- Fits both 2-door and 4-door models without modifications
- Dual 4.0in (101.6mm) bolt-on black ceramic exhaust tips
- Increase Throttle Response and Decreases Turbo Lag
- High-tuck design for increased ground clearance
- Designed and manufactured in Pomona, CA
- Full Cat-Back Exxhaust System
- Emissions
-
The all-new 6th Generation Ford Bronco is an amazing vehicle that comes from the factory ready to tackle the world. That said, there are a few design flaws that limit the amazing ability the Bronco has to offer. One of those flaws is the reduced approach and departure angle from the oversize stock muffler and low hanging exhaust tip. Injen has recognized this issue and has an affordable solution that allow you not only improve your approach and departure angles, but also improve performance and completely change the sound of your Bronco!
SES Muffler Delete Kit, Part No. SES9300MD, 2021-2024 Ford Bronco L4-2.3L Turbo / V6-2.7L Twin Turbo- Note: This part is not an emissions-related part and therefore can be used on Emission Controlled Vehicles without a CARB EO#
- Oversized tubing reduces restriction providing increased airflow and performance
- Fast and simple bolt-on that provides increased approach and departure angles
- Manufactured from huge 3.0in (76mm) mandrel-bent 304 stainless-steel tubing
- Straight through, single exit design developed for maximum exhaust flow
- Includes high quality band clamps for a simple, leak-free installation
- Hand Crafted and TIG Welded to Perfection for Strength and Durability
- Injen’s Muffler Delete Kit replaces the restrictive factory muffler.
- Uses all factory mounting locations with factory-style hangers
- Fits both 2-door and 4-door models without modifications
- Dyno Proven gains of up to 8 hp and 10 lb-ft. of torque
- Increase Throttle Response and Decreases Turbo Lag
- High-tuck design for increased ground clearance
- Designed and manufactured in Pomona, CA
- EMISSIONS
Showing 20245–20256 of 30904 results