Shop

The all-new 2020 Toyota GR Supra with the L6-3.0L turbo engine is a beast from the factory, so the engineers at Injen Technology needed to design an intake that packed a serious punch to keep up with this athletic and sophisticated performer. The R&D team took the new Toyota Supra deep into the lab to extract the hidden power lurking under the hood. From start to finish, each aspect of Injen Technology’s traditional aluminum Cold Air Intake for the 2020 Toyota GR Supra was a true labor of love. The Injen SP2300 cold air intake has the cleanest installation on the market that is also available in multiple finishes for that personized look. The OE intake tract on the A90 Supra is very restrictive from the factory and limiting power output by choking the turbo. Our new SP2300 short ram cold air intake opens up that intake tract with a large 4.0″ aluminum intake tube that allows that turbo and engine to breathe deep and produce the power that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Toyota Supra and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
Cold Air Intake System; Incl. Tubing/Filter/Hardware/Instruction; w/MR Technology; Converts To Short Ram; HP Gains +15.0 HP/Torque Gains +17.0 ft. lbs.; Wrinkle Black;

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Available in Polished (SP2300P), Wrinkle Black (SP2300WB), and Wrinkle Red (SP2300WR)
• Provides power gains while maintaining A/F ratios: no additional tuning required
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 15 hp and 17 lb.-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional Hydroshield part number 1037BLK or 1037RED
• Massive 4.00″ 6061-T6 aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Replacement air filter # X-1026-BB
• Made in Pomona California, USA
• Stainless Steel Band Clamps

The all-new 2020 Toyota GR Supra with the L6-3.0L turbo engine is a beast from the factory, so the engineers at Injen Technology needed to design an intake that packed a serious punch to keep up with this athletic and sophisticated performer. The R&D team took the new Toyota Supra deep into the lab to extract the hidden power lurking under the hood. From start to finish, each aspect of Injen Technology’s traditional aluminum Cold Air Intake for the 2020 Toyota GR Supra was a true labor of love. The Injen SP2300 cold air intake has the cleanest installation on the market that is also available in multiple finishes for that personized look. The OE intake tract on the A90 Supra is very restrictive from the factory and limiting power output by choking the turbo. Our new SP2300 short ram cold air intake opens up that intake tract with a large 4.0″ aluminum intake tube that allows that turbo and engine to breathe deep and produce the power that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Toyota Supra and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
Cold Air Intake System; Incl. Tubing/Filter/Hardware/Instruction; w/MR Technology; Converts To Short Ram; HP Gains +15.0 HP/Torque Gains +17.0 ft. lbs.; Polished;

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Available in Polished (SP2300P), Wrinkle Black (SP2300WB), and Wrinkle Red (SP2300WR)
• Provides power gains while maintaining A/F ratios: no additional tuning required
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 15 hp and 17 lb.-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional Hydroshield part number 1037BLK or 1037RED
• Massive 4.00″ 6061-T6 aluminum intake tubing
• Injen Technology Limited Lifetime Warranty
• Aggressive engine tone under full throttle
• Replacement air filter # X-1026-BB
• Made in Pomona California, USA
• Stainless Steel Band Clamps

The all-new 2020 Toyota GR Supra with the L6-3.0L turbo engine is a beast from the factory, so the engineers at Injen Technology needed to design an intake that packed a serious punch to keep up with this athletic and sophisticated performer. The R&D team took the new Toyota Supra deep into the lab to extract the hidden power lurking under the hood. From start to finish, each aspect of Injen Technology’s traditional aluminum Cold Air Intake for the 2020 Toyota GR Supra was a true labor of love. The Injen SP2300 cold air intake has the cleanest installation on the market that is also available in multiple finishes for that personized look. The OE intake tract on the A90 Supra is very restrictive from the factory and limiting power output by choking the turbo. Our new SP2300 short ram cold air intake opens up that intake tract with a large 4.0″ aluminum intake tube that allows that turbo and engine to breathe deep and produce the power that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Toyota Supra and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
Cold Air Intake System; Incl. Tubing/Filter/Hardware/Instruction; w/MR Technology; Converts To Short Ram; HP Gains +15.0 HP/Torque Gains +17.0 ft. lbs.; Wrinkle Red;

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Available in Polished (SP2300P), Wrinkle Black (SP2300WB), and Wrinkle Red (SP2300WR)
• Provides power gains while maintaining A/F ratios: no additional tuning required
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 15 hp and 17 lb.-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional Hydroshield part number 1037BLK or 1037RED
• Massive 4.00″ 6061-T6 aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque Up To 9.3 ft./lbs.
• Replacement air filter # X-1026-BB
• Made in Pomona California, USA

Injen Technology’s new EVO9300 Cold Air Intake for the 2021-2024 Ford Bronco’s equipped with the 2.3L EcoBoost engine is here and one look at the stats of this intake system and you’ll know that it’s the right choice for your new Bronco. The EVO9300 is a true 3D designed intake system that simply drops-in without any modifications, plus it delivers on those performance gains without the need for additional and expensive engine tuners. Simply install our intake system and you’re set with no check engine lights and no drama!
EVOLUTION Cold Air Intake System, Part No. EVO9300, 2021-2024 Ford Bronco L4-2.3L Turbo

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Large forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grille
• Secondary Inlet for additional airflow OR to adapt to Injen’s upcoming snorkel system
• Massive intake tube that tapers down from 5in OD to 3.5in for increased airflow
• Unlike the competition, the Injen intake tube goes all the way to the turbo
• Also available with a 8-Layer Oiled Air Filter: Intake system P/N EVO9300C
• No Tune Required – Designed to work seamless with the stock calibration
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 13 hp and 13 lb.-ft. of torque
• Utilizes our patented Twist-Lock Filter attachment system
• Stainless steel band clamps with inner protective liner
• Durable XLPE Roto-Molded Polyethylene tube and housing
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Injen Technology Limited Lifetime Warranty
• Replacement air filter # X-1116-BB
• Made in Pomona California, USA

Injen Technology’s new EVO9300C Cold Air Intake for the 2021-2024 Ford Bronco’s equipped with the 2.3L EcoBoost engine is here and one look at the stats of this intake system and you’ll know that it’s the right choice for your new Bronco. The EVO9300C is a true 3D designed intake system that simply drops-in without any modifications, plus it delivers on those performance gains without the need for additional and expensive engine tuners. Simply install our intake system and you’re set with no check engine lights and no drama!
EVOLUTION Cold Air Intake System, Part No. EVO9300C, 2021-2024 Ford Bronco L4-2.3L Turbo

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Large forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grille
• Secondary Inlet for additional airflow OR to adapt to Injen’s upcoming snorkel system
• Massive intake tube that tapers down from 5in OD to 3.5in for increased airflow
• Unlike the competition, the Injen intake tube goes all the way to the turbo
• No Tune Required – Designed to work seamless with the stock calibration
• Also available with a Dry Air Filter: Intake system P/N EVO9300
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze air filter
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 13 hp and 13 lb.-ft. of torque
• Utilizes our patented Twist-Lock Filter attachment system
• Optional Injen air filter cleaning kit part number X-1030
• Stainless steel band clamps with inner protective liner
• Durable XLPE Roto-Molded Polyethylene tube and housing
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1116-BR
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA

Injen Technology’s new EVO9301 Cold Air Intake for the 2021-2022 Ford Bronco’s equipped with the 2.7L V6 EcoBoost engine is here and one look at the stats of this intake system and you’ll know that it’s the right choice for your new Bronco. The EVO9301 is a true 3D designed intake system that simply drops-in without any modifications, plus it delivers on those performance gains without the need for additional and expensive engine tuners. Simply install our intake system and you’re set with no check engine lights and no drama!
EVOLUTION Cold Air Intake System, Part No. EVO9301, 2021-2022 Ford Bronco V6-2.7L Twin Turbo

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Large forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grille
• Secondary Inlet for additional airflow OR to adapt to Injen’s upcoming snorkel system
• Unlike the competition, the Injen intake tubes goes all the way to the turbos
• Also available with a 8-Layer Oiled Air Filter: Intake system P/N EVO9301C
• No Tune Required – Designed to work seamless with the stock calibration
• Custom tapered dual intake tube for increased airflow to both turbos
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 26 hp and 27 lb.-ft. of torque
• Utilizes our patented Twist-Lock Filter attachment system
• Stainless steel band clamps with inner protective liner
• Durable XLPE Roto-Molded Polyethylene tube and housing
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Injen Technology Limited Lifetime Warranty
• Replacement air filter # X-1116-BB
• Made in Pomona California, USA

Injen Technology’s new EVO9301C Cold Air Intake for the 2021-2022 Ford Bronco’s equipped with the 2.7L V6 EcoBoost engine is here and one look at the stats of this intake system and you’ll know that it’s the right choice for your new Bronco. The EVO9301C is a true 3D designed intake system that simply drops-in without any modifications, plus it delivers on those performance gains without the need for additional and expensive engine tuners. Simply install our intake system and you’re set with no check engine lights and no drama!
EVOLUTION Cold Air Intake System, Part No. EVO9301C, 2021-2022 Ford Bronco V6-2.7L Twin Turbo

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Large forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grille
• Secondary Inlet for additional airflow OR to adapt to Injen’s upcoming snorkel system
• Unlike the competition, the Injen intake tubes goes all the way to the turbos
• Also available with a SuperNano-Web dry air Filter: Intake system P/N EVO9301
• No Tune Required – Designed to work seamless with the stock calibration
• Custom tapered dual intake tube for increased airflow to both turbos
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 26 hp and 27 lb.-ft. of torque
• Utilizes our patented Twist-Lock Filter attachment system
• Optional Air Filter Cleaning Kit also Available – X-1030
• Stainless steel band clamps with inner protective liner
• Durable XLPE Roto-Molded Polyethylene tube and housing
• Reinforced automotive grade silicone couplers
• Injen Technology Limited Lifetime Warranty
• Replacement air filter # X-1116-BR
• Made in Pomona California, USA

The SP series of cold air intakes is Injen?s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Kia Stinger and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
SP Aluminum Series Short Ram Air Intake System, Part No. SP1352P, 2022-2023 Kia Stinger L4-2.5L Turbo

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Massive 4.0in mandrel-bent aluminum tubing for maximum power!
• Dyno Proven gains of up to 18 hp and 20 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Provides power gains while maintaining A/F ratios
• Manufactured from 6061-T6 aluminum intake tubing
• Aggressive engine tone while under full throttle
• Replacement air filter part number X-1070-BB
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1076BLK
• Available in three amazing finishes
• Made in Pomona California, USA
• No additional tuning required
• Short Ram Air Intake Design
• SP1352WB (Wrinkle Black)
• SP1352WR (Wrinkle Red)
• SP1352P (Polished)

The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides our signature intake growl that will surely excite your senses as you open your Volkswagen GTI and let that turbo spool. The soul of this intake is found within our 3.500in air intake tubing that is manufactured from premium grade 6061-T6 aluminum. That massive intake tube provides a smooth uninterrupted path for highly efficient airflow and maximum power gains. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
SP Aluminum Series Short Ram Air Intake System, Part No. SP3000WB, 2022-2024 Volkswagen GTI L4-2.0L (t)

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Available in multiple finishes- Polished, Wrinkle Black, and Wrinkle Red
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 12 hp and 22 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Provides power gains while maintaining A/F ratios
• Replacement air filter part number X-1079-BB
• Injen Technology Limited Lifetime Warranty
• Aggressive engine tone under full throttle
• Optional hydroshield part number 1121BLK
• Made in Pomona California, USA
• 6061-T6 aluminum intake tubing
• No additional tuning required
• Short Ram Air Intake Design

The SP series line of air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. SP series air intakes are Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system, something no other manufacturer can claim. SP series air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patent 7,721,669), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket.
SP Aluminum Series Short Ram Air Intake System, Part No. SP2082P, 2023-2025 Toyota GR Corolla L3-1.6L Turbo

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Includes easy to follow installation instructions with clear pictures for an easy installation
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Made from 3.50in Mandrel-Bent 6061-T6 aluminum intake tubing
• Dyno Proven gains of up to 20 hp and 25 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Features Injen?s patented MegaRam (MR) Technology
• Provides power gains while maintaining A/F ratios
• Replacement air filter part number X-1079-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California, USA
• Available in multiple finishes
• No additional tuning required
• Short Ram Air Intake Design