-
Injen’s all new Evolution series sealed cold air intake system for the 2019-2025 GM Trucks and SUVs is quite literally unmatched in the aftermarket. The EVO7104 is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. On top of that beautiful housing is our Clear-View window for easy filter inspection. This window has an eye-catching red stripe with a white Injen logo that really pops when you open your hood. The EVO7104 housing encloses an Injen SuperNano-Web dry air filter utilizing our patented Twist-Lock technology for a simple install and clean looks. Injen’s EVO7104 comes with all the necessary hardware to provide a simple and fast installation. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS straight out of the box.
EVOLUTION Cold Air Intake System, Part No. EVO7104, 2019-2025 GM 1500 Truck & SUV V8-5.3L/6.2L.- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Also available with a 8-Layer Oiled Air FIlter: Intake system P/N EVO7104C
- Aggressive under hood appearance while maintaining an OE fit
- Features Injen’s patented internal MegaRam (MR) Technology
- Utilizes our patented Twist-Lock Filter attachment system
- Dyno Proven gains of up to 13 hp and 14 lb-ft. of torque
- Injen Clear-View badge for simple air filter inspection
- Stainless steel band clamps with inner protective liner
- Durable XLPE Roto-Molded Polyethylene tube and housing
- Fully serviceable Injen SuperNano-Web dry air filter
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1107-BB
- Designed to work with the stock calibration
- Injen Technology Limited Lifetime Warranty
- Optional hydroshield part number 1119BLK
- Made in Pomona California, USA
-
Injen’s all new Evolution series sealed cold air intake system for the 2019-2025 GM Trucks and SUVs is quite literally unmatched in the aftermarket. The EVO7104C is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. On top of that beautiful housing is our Clear-View window for easy filter inspection. This window has an eye-catching red stripe with a white Injen logo that really pops when you open your hood. The EVO7104C housing encloses an Injen 8-Layer oiled cotton gauze air filter utilizing our patented Twist-Lock technology for a simple install and clean looks. Injen’s EVO7104C comes with all necessary hardware to provide a simple and fast installation. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS straight out of the box.
EVOLUTION Cold Air Intake System, Part No. EVO7104C, 2019-2025 GM 1500 Truck & SUV V8-5.3L/6.2L.- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Also available with our dry Air FIlter: Intake system P/N EVO7104
- Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
- Aggressive under hood appearance while maintaining an OE fit
- Features Injen’s patented internal MegaRam (MR) Technology
- Utilizes our patented Twist-Lock Filter attachment system
- Dyno Proven gains of up to 13 hp and 14 lb-ft. of torque
- Injen Clear-View badge for simple air filter inspection
- Stainless steel band clamps with inner protective liner
- Durable XLPE Roto-Molded Polyethylene tube and housing
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1107-BR
- Designed to work with the stock calibration
- Injen Technology Limited Lifetime Warranty
- Optional hydroshield part number 1119BLK
- Made in Pomona California, USA
-
Does your ride need some excitement added to it? Of course it does and why would that ever be a question?! Well, you’re in luck because the engineers at Injen Technology have you covered. Check out this Injen PowerFlow (PF) intake to fulfill all of your horsepower desires. The Injen PF cold air intakes have dyno proven power gains that don’t lie. The 6061-T6 aluminum tubing offers superior airflow and styling, plus it’s available with multiple finish options, allowing you to choice on the finished look inside your engine bay. Injen likes to keep things cool, so the air filter is positioned in the best possible location to keep that unwanted hot air from entering your intake. This helps drop air intake temperatures and feed cool, dense air to that hungry engine. This Injen PF intake kit includes everything that is required for a direct-fit installation. Just like all of Injen’s cold air intake systems, this PF Cold air Intake kit includes the unbeatable Injen limited Lifetime Warranty. Rest assured that all of your Injen parts are performing perfectly for as long as you own them!
Power-Flow Air Intake System; Incl. Tubing/Filter/Hardware/Instruction; HP Gains +14 HP/Torque Gains +13 ft./lbs.; Wrinkle Black;- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Provides power gains while maintaining A/F ratios with no additional tuning
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Available with multiple finish options (select applications)
- Dyno Proven gains of up to 14 hp and 13 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1037BLK or 1037RED
- Replacement air filter part number X-1102-BB
- Injen Technology Limited Lifetime Warranty
- Aggressive engine tone under full throttle
- 6061-T6 aluminum intake tubing
- Made in Pomona California, USA
-
Is your 2019-2020 Volkswagen Jetta 1.4L Turbo engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP3031 cold air intake from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. , , The soul of this intake is found within our 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket.
Short Ram Air Intake System; Incl. Tubing/SuperNano-Web Dry Filter/Hardware/Instruction; HP Gains +6 HP/Torque Gains +7 ft./lbs.; Polished;- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 6 hp and 7 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1013-BB
- Injen Technology Limited Lifetime Warranty
- Aggressive engine tone under full throttle
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona California, USA
- No additional tuning required
- Short Ram Air Intake Design
-
Is your 2019-2020 Volkswagen Jetta 1.4L Turbo engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP3031 cold air intake from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. , , The soul of this intake is found within our 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket.
Short Ram Air Intake System; Incl. Tubing/SuperNano-Web Dry Filter/Hardware/Instruction; HP Gains +6 HP/Torque Gains +7 ft./lbs.; Wrinkle Black;- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Includes custom heat shield specifically designed for this application
- Smooth intake piping eliminates restrictions and improves airflow
- Dyno Proven gains of up to 6 hp and 7 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Optional hydroshield part number 1033BLK or 1033RED
- Provides power gains while maintaining A/F ratios
- Replacement air filter part number X-1013-BB
- Injen Technology Limited Lifetime Warranty
- Aggressive engine tone under full throttle
- 6061-T6 aluminum intake tubing
- Available in multiple finishes
- Made in Pomona California, USA
- No additional tuning required
- Short Ram Air Intake Design
-
The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open your Genesis G70 and let those turbos spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.
SP Short Ram Air Intake System, Part No. SP1351WB, 2019-2023 Genesis G70 V6-3.3L Twin Turbo.- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Stepped from 3.00in to 2.50in to 2.25in 6061-T6 aluminum intake tubing
- Smooth intake piping eliminates restrictions and improves airflow
- Replacement air filter part number X-1020-BB (Two Required)
- Twin Fully serviceable Injen SuperNano-Web dry air filter
- Dyno Proven gains of up to 16 hp and 18 lb-ft. of torque
- Innovative Stepped Design allows for maximum airflow
- Optional Hydroshield part number 1035BLK or 1035RED
- Dual mandrel-bent 6061-T6 aluminum intake tubing
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Available in three amazing finishes:
- Made in Pomona California, USA
- No additional tuning required
- Short Ram Air Intake Design
- SP1351WR (Wrinkle Red) and
- SP1351P (Polished Finish)
- SP1351WB (Wrinkle Black)
-
Here at Injen, there is no sacrificing build quality. Each and every component included with this kit has been tried, tested, and proven over decades of refinement. The SES1342AB utilizes Investment Cast Flanges to provide an incredibly precise fit and finish, not to mention the simplest installation process available. Hand-crafted with only the finest materials, this kit utilizes 304 Stainless Steel tubing, hangers, and flanges. If the tone alone doesn’t garner enough attention, the detachable rear hangers include a cut Injen logo that’s sure to impress anyone that takes the time to look at what lies beneath. Not to mention, all of Injen’s Exhaust Systems are hand-crafted in Pomona, CA with the highest level of precision possible. Designed to fit into factory mounting locations, with no cutting or drilling required. As always, the industry-leading Injen Technology Limited Lifetime Warranty ensures that the exhaust you love will last for years to come.
Performance Axle Back Exhaust System, Part No. SES1342AB, 2019-2021 Hyundai Veloster L4-1.6L Turbo- This product utilizes Stainless Steel Investment Cast Flanges for a Precise Fit and Easy Installation
- If you’re looking to improve sound, power, and looks then this is the system for you!
- Bolt-on Exhaust Tip design for infinite adjustability and a perfect fit, every time
- Hand Crafted and TIG Welded to Perfection for Strength and Durability
- 76mm inlet to dual 60mm outlet muffler for that signature Injen sound
- Sexy dual center-exit design with custom polished hangers
- Stainless Steel Hardware and Hangers for a simple install
- Manufactured from premium 304 SS Mandrel-Bent Tubing
- Designed and Manufactured in Pomona, CA
- No Cutting or Welding Required
- Elegant Axle-Back design
-
SuperNano-Web Dry Air Filter: ‘That’s massive!’ is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO1301 cold air intake system. This filter has been uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock technology has allowed our engineers to use the largest filter possible for this application, which increases the available air volume, resulting in added power while keeping the installation process quick and simple.
EVOLUTION Cold Air Intake System, Part No. EVO1301, 2019-2021 Hyundai Veloster N L4-1.6L Turbo- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Intake scoop integration is designed to capture the largest amount of cool air for max performance
- Replacement air filter part number X-1108-BB (Dry) or X-1108-BR (Oiled Cotton)
- Simple drop-in installation can normally be completed within 20 minutes
- Air Filter attaches to the airbox using our patented TwistLok method
- Box seamlessly adapts to the OE inlet scoop without modification
- Fully serviceable 4.00″ I.D. Injen SuperNano-Web dry air filter
- Manufactured from high-strength XLPE Roto-Molded Polyethylene
- Aggressive under hood appearance while maintaining an OE fit
- Dyno Proven gains of up to 10 hp and 9 lb-ft. of torque
- Stainless steel band clamps with inner protective liner
- Reinforced automotive grade silicone couplers
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Injen Technology Limited Lifetime Warranty
- Made in Pomona California, USA
-
SuperNano-Web Dry Air Filter: ‘That’s massive!’ is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO1300 cold air intake system. This filter has been uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock technology has allowed our engineers to use the largest filter possible for this application, which increases the available air volume, resulting in added power while keeping the installation process quick and simple.
EVOLUTION Cold Air Intake System, Part No. EVO1300, 2019-2022 Hyundai Veloster N L4-2.0L Turbo- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Intake scoop integration is designed to capture the largest amount of cool air for max performance
- Replacement air filter part number X-1108-BB (Dry) or X-1108-BR (Oiled Cotton)
- Simple drop-in installation can normally be completed within 20 minutes
- Air Filter attaches to the airbox using our patented TwistLok method
- Box seamlessly adapts to the OE inlet scoop without modification
- Fully serviceable 4.00″ I.D. Injen SuperNano-Web dry air filter
- Manufactured from high-strength XLPE Roto-Molded Polyethylene
- Aggressive under hood appearance while maintaining an OE fit
- Dyno Proven gains of up to 10 hp and 9 lb-ft. of torque
- Stainless steel band clamps with inner protective liner
- Reinforced automotive grade silicone couplers
- Designed to work with the stock calibration
- Injen Technology Limited Lifetime Warranty
- Aggressive intake growl under acceleration
- Made in Pomona California, USA
-
Injen 19-22 Hyundai Veloster N L4 2.0L Turbo Performance SS Axle Back Exhaust System – Burnt Ti Tips
Here at Injen, there is no sacrificing build quality. Each and every component included with this kit has been tried, tested, and proven over decades of refinement. The SES1343ABTT utilizes Investment Cast Flanges to provide an incredibly precise fit and finish, not to mention the simplest installation process available. Hand-crafted with only the finest materials, this kit utilizes 76mm 304 Stainless Steel tubing, hangers, and flanges. If the tone alone doesn’t garner enough attention, the twin titanium-look exhaust tips are sure to impress anyone that takes the time to look at what lies beneath. Not to mention, all of Injen’s Exhaust Systems are hand-crafted in Pomona, CA with the highest level of precision possible. Designed to fit into factory mounting locations, with no cutting or drilling required.
Performance Exhaust System, Part No. SES1343ABTT, 2019-2020 Hyundai Veloster N L4-2.0L Turbo- This product utilizes Stainless Steel Investment Cast Flanges for a Precise Fit and Easy Installation
- If you’re looking to improve sound, power, and looks then this is the system for you!
- Bolt-on Exhaust Tip design for infinite adjustability and a perfect fit, every time
- Note: Fits Models WITHOUT Performance Package (Active Variable Exhaust)
- Hand Crafted and TIG Welded to Perfection for Strength and Durability
- Stainless Steel Hardware and Hangers for a simple install
- 76mm dual muffler design for that signature Injen sound
- Sexy dual-exit exhaust system with Titanium-look tips
- Manufactured from premium 304 SS Mandrel-Bent Tubing
- Designed and manufactured in Pomona, CA
- No Cutting or Welding Required
- Elegant Axle-Back design
-
Injen’s all new Evolution series sealed cold air intake system for the 2019-2024 RAM 1500 (DT) trucks equipped with the V8-5.7L is unmatched in the aftermarket. The EVO8101 is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. On top that of that beautiful housing is our Clear-View window for easy filter inspection. This window has an eye-catching red stripe with a white Injen logo that really pops when you open your hood. The EVO8101 housing encloses an Injen SuperNano-Web Dry air filter utilizing our patented Twist-Lock technology for a simple install and clean looks. Injen’s EVO8101 comes with all necessary hardware to provide a simple and fast installation. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS straight out of the box.
EVOLUTION Cold Air Intake System, Part No. EVO8101, 2019-2024 RAM 1500 (DT) V8-5.7L- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles
- Also available with an 8-Layer oiled Air FIlter: Intake system P/N EVO8101C
- Durable XLPE Roto-Molded Polyethylene tube and housing and air scoop
- Intake scoop is designed to capture the largest amount of cool air
- Smooth intake piping eliminates restrictions and improves airflow
- Aggressive under hood appearance while maintaining an OE fit
- Utilizes our patented Twist-Lock Filter attachment system
- Dyno Proven gains of up to 13 hp and 14 lb-ft. of torque
- Injen Clear-View badge for simple air filter inspection
- Fully serviceable Injen SuperNano-Web dry air filter
- Does not fit the classic body (DS) style RAM trucks
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1116-BB
- Designed to work with the stock calibration
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Made in Pomona California, USA
-
Injen’s all new Evolution series sealed cold air intake system for the 2019-2024 RAM 1500 (DT) trucks equipped with the V8-5.7L is unmatched in the aftermarket. The EVO8101C is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. On top that of that beautiful housing is our Clear-View window for easy filter inspection. This window has an eye-catching red stripe with a white Injen logo that really pops when you open your hood. The EVO8101C housing encloses an Injen 8-Layer oiled cotton gauze air filter utilizing our patented Twist-Lock technology for a simple install and clean looks. Injen’s EVO8101C comes with all necessary hardware to provide a simple and fast installation. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS straight out of the box.
EVOLUTION Cold Air Intake System, Part No. EVO8101C, 2019-2024 RAM 1500 (DT) V8-5.7L- Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles
- Also available with our SuperNano-Web Dry Air Filter: Intake system P/N EVO8101
- Durable XLPE Roto-Molded Polyethylene tube and housing and air scoop
- Intake scoop is designed to capture the largest amount of cool air
- Smooth intake piping eliminates restrictions and improves airflow
- Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
- Aggressive under hood appearance while maintaining an OE fit
- Utilizes our patented Twist-Lock Filter attachment system
- Optional Injen air filter cleaning kit part number X-1030
- Dyno Proven gains of up to 13 hp and 14 lb-ft. of torque
- Injen Clear-View badge for simple air filter inspection
- Does not fit the classic body style (DS) RAM trucks
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1116-BR
- Designed to work with the stock calibration
- Aggressive engine tone under full throttle
- Injen Technology Limited Lifetime Warranty
- Made in Pomona California, USA
Showing 19789–19800 of 30066 results