-
Edelbrock part #7516-BP RPM Air-Gap intake manifold is based on the powerful Performer RPM Vortec #7116. This single four-barrel intake is designed for 262-400 c.i.d. Chevy V8’s with 1996 and later Vortec (L31) cast iron or Edelbrock E-Tec aluminum heads. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. An external water bypass boss is machined into the front of the water crossover for use on 1996 and later Vortec production engines. Includes rear water outlets, nitrous bosses, a temp sensor boss that clears all waternecks, two distributor clamp locations and a heater outlet boss that’s angled for proper fit over the valve cover. Accepts 1976 and later alternator and air-conditioning brackets for street installations. For square-bore carbs. The PN 7516-BP version comes with a brilliant Black plasma finish that is durable and easy to maintain. No provision for exhaust-heated chokes and no exhaust crossover. Will not fit under stock Corvette hood.
Edelbrock Part #7516-BP RPM Air-Gap intake manifold is designed for Small-Block Chevy with Vortec or E-tec style cylinder heads. Perfect for any builder looking for optimum 1500-6500 rpm performance with a beautiful Black Plasma finish. -
Edelbrock part #7516-CP RPM Air-Gap intake manifold is based on the powerful Performer RPM Vortec #7116. This single four-barrel intake is designed for 262-400 c.i.d. Chevy V8’s with 1996 and later Vortec (L31) cast iron or Edelbrock E-Tec aluminum heads. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. An external water bypass boss is machined into the front of the water crossover for use on 1996 and later Vortec production engines. Includes rear water outlets, nitrous bosses, a temp sensor boss that clears all waternecks, two distributor clamp locations and a heater outlet boss that’s angled for proper fit over the valve cover. Accepts 1976 and later alternator and air-conditioning brackets for street installations. For square-bore carbs. The PN 7516-CP version comes with a brilliant Chrome plasma finish that is durable and easy to maintain. No provision for exhaust-heated chokes and no exhaust crossover. Will not fit under stock Corvette hood.
Edelbrock Part #7516-CP RPM Air-Gap intake manifold is designed for Small-Block Chevy with Vortec or E-tec style cylinder heads. Perfect for any builder looking for optimum 1500-6500 rpm performance with a beautiful Chrome Plasma finish. -
Edelbrock part #7581-BP RPM Air-Gap 351W intake manifold is designed for street and high performance 351-427 c.i.d. 351W Ford V8 applications. The RPM Air-Gap incorporates the same race-winning design that’s been used on our Victor Series competition intakes for decades. The Air-Gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Larger cross sectional area and a taller carb flange than #7181 for compatibility with large displacement, stroker 351W based engines. Includes bosses for nitrous and rear water crossover. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.
Edelbrock Performer RPM Air-Gap Intake Manifold for 351W Ford Small Block Windsor engines, Black Plasma -
Edelbrock part #7581-CP RPM Air-Gap 351W intake manifold is designed for street and high performance 351-427 c.i.d. 351W Ford V8 applications. The RPM Air-Gap incorporates the same race-winning design that’s been used on our Victor Series competition intakes for decades. The Air-Gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Larger cross sectional area and a taller carb flange than #7181 for compatibility with large displacement, stroker 351W based engines. Includes bosses for nitrous and rear water crossover. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.
Edelbrock Performer RPM Air-Gap Intake Manifold for 351W Ford Small Block Windsor engines, Chrome Plasma -
Edelbrock part #7501 RPM Air-Gap #7501 intake manifold is designed for 1955-86 262-400 c.i.d. Chevrolet V8 applications. The award-winning RPM Air-Gap intake manifold incorporates the same race-winning technology that’s used on our Victor Series competition intakes. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power.
Edelbrock Performer RPM AIR-GAP Intake Manifold For Chevrolet 262-400 Small-Block V8
Chevrolet:Small-Block Gen I:262 (4.3L)-400 (6.6L)- For Square Bore Carburetors Only
-
Edelbrock Part PN 2121-BP Performer intake manifold is designed for street Small-Block Ford 260-289-302 CID V8’s without EGR. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. This PN 2121-BP version comes with a beautiful reflective Black Plasma finish that is durable and easy to maintain. The Plasma finishes are applied by a fully automated 7 stage prewash and 4 stage finish. A durable clear powder coat finises the process. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000. For more info go to www.lokar.com. Will not fit Boss 302 or 255 c.i.d. V8’s.
Edelbrock PN 2121-BP Performer intake manifold is designed for SB 289-302 Ford V8. Perfect for Mustangs, Ranchero’s, Bronco’s etc or anyone looking for great torque and HP from idle to 5500 rpm with a beautiful Black Plasma finish. -
Edelbrock Part PN 2121-CP Performer intake manifold is designed for street Small-Block Ford 260-289-302 CID V8’s without EGR. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. The PN 2121-CP version comes with a brilliant Chrome plasma finish that is durable and easy to maintain. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000. For more info go to www.lokar.com. Will not fit Boss 302 or 255 c.i.d. V8’s.
Edelbrock PN 2121-CP Performer intake manifold is designed for SB 289-302 Ford V8. Perfect for Mustangs, Ranchero’s, Bronco’s etc or anyone looking for great torque and HP from idle to 5500 rpm with a beautiful Chrome Plasma finish. -
Edelbrock part #2701 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. With that the Edelbrock Performer EPS intake manifold has a runner design that’s “tuned” for peak torque at 3500 rpm on a 350-inch engine making it ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the power increases averaged 5+ ft-lbs. of torque for more performance where you need it most.
Edelbrock Performer EPS Intake Manifold for 1955-86 262-400 Small-Block Chevrolet V8, Accepts a 4150-Style Square-Bore Carburetor. Non-EGR.
Chevrolet:Small-Block Gen I:265 (4.3L)/267 (4.4L)/283 (4.6L)/302 (4.9L)/305 (5.0L)/307 (5.0L)/327 (5.4L)/350 (5.7L)/400 (6.6L)- Prod. +5 HP and +9 ft./lbs. of Torque Over PN[2101]
-
The Edelbrock Supercharger System #1528 for your 2015-18 Wrangler delivers 317 RWHP and 277 RWTQ for a manual and 303 RWHP and 262 RWTQ for an automatic. This Supercharger is exclusively for the Pentastar 3.6L V6 Engine featuring a unique design with minimal components make it possible to fit under the stock hood. The core of each system is the Eaton Gen VI 1320 TVS rotating assembly with a four-lobe design and 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path that for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger. Part #1528 will require the ECM and TCM to be sent into Edelbrock for modification, no handheld programmer is included with these systems. This is an 8-10 day process/waiting period from the time they are received.
Edelbrock part #1528 Jeep Wrangler 3.6L V6 2015-18 Pentastar Supercharger, delivers 317 RWHP and 277 RWTQ for a MANUAL and 303 RWHP and 262 RWTQ for an auto.
Jeep:Pentastar V6:220 (3.6L)- Little To No Decrease In Fuel Economy
-
The Edelbrock #22715 Max-Fire Ultra-Spark 50 Performance’s Spark plug wires are manufactured from highest quality materials to help deliver maximum voltage ? ensuring the ultimate performance. These wires have an extremely high EMI/RFI suppression along with a very low resistance to help deliver the most spark possible. They feature a heavy duty 8.5mm diameter silicone jacket to protect the Kevlar spiral wound core from heat, moisture and chemicals. They are engineered for high performance engines that need all of the voltage they can get for maximum power output. Made with wire leads that deliver a low 40 ohms of resistance per-foot for maximum EMI/RFI noise suppression. This makes them ideal for engines with aftermarket high performance upgrades that require maximum voltage. See application chart for engine or vehicle specific kits.
Max-Fire Engine Specific (Ultra-Spark 50) High Performance Spark Plug Wire Set
Chevrolet:Small-Block Gen III LS1:346 (5.7L)- Kevlar Core
-
The Edelbrock #22716 Max-Fire Ultra-Spark 50 Performance’s Spark plug wires are manufactured from highest quality materials to help deliver maximum voltage ? ensuring the ultimate performance. These wires have an extremely high EMI/RFI suppression along with a very low resistance to help deliver the most spark possible. They feature a heavy duty 8.5mm diameter silicone jacket to protect the Kevlar spiral wound core from heat, moisture and chemicals. They are engineered for high performance engines that need all of the voltage they can get for maximum power output. Made with wire leads that deliver a low 40 ohms of resistance per-foot for maximum EMI/RFI noise suppression. This makes them ideal for engines with aftermarket high performance upgrades that require maximum voltage. See application chart for engine or vehicle specific kits.
Max-Fire Engine Specific (Ultra-Spark 50) High Performance Spark Plug Wire Set
Chevrolet:Small-Block LC9:325 (5.3L);Chevrolet:Small-Block LH8:325 (5.3L);Chevrolet:Small-Block LMF:325 (5.3L);Chevrolet:Small-Block LMG:325 (5.3L);Chevrolet:Small-Block LY5:325 (5.3L);Chevrolet:Small-Block Gen III LM7:325 (5.3L);Chevrolet:Small-Block Gen- Kevlar Core
-
The Edelbrock Stage 1 Street Supercharger system #15540 (No Tuner) for 2016-18 Mazda MX-5 Miata increases the performance of your SKYACTIV -G 2.0L engine to 198 horsepower and 182 ft-lbs of torque at the rear wheels. Its unique design allows for maximum flow, while retaining great daily driving characteristics. It has been designed from the ground-up and utilizes the Eaton R900 TVS rotor assembly for maximum efficiency in a compact package. To cool the incoming air, is an air-to-water intercooler and heat exchanger. All these features help the Edelbrock deliver dramatically improved performance with a smooth linear power curve. Lastly, the supercharger assembly is finished with a durable black powder coating for a unique look that will let everybody know your car is Edelbrock powered! Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock program. For safety, the Edelbrock-supplied program will retain the factory vehicle speed limiter setting. Increases horsepower by 41% and torque by 36% over stock. Unique compact design fits under the stock hood. Supplied with preformed hoses for ease of installation – no trimming needed. Bolt-on installation – everything fits right out of the box with no cutting or welding needed. Features Eaton Gen VI R900 TVS rotor assembly; the same high-quality rotors used by many OEM manufacturers. Self-contained oil system with 100,000 mile service interval (no drilling or plumbing required). Integrated bypass valve for minimal decrease in fuel economy. Available with a FREE 3-year 36,000 mile powertrain warranty. Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock program.
Edelbrock Stage 1 Street Supercharger system part #15540 (No Tuner) for 2016-18 Mazda MX-5 Miata
Mazda:Skyactive I4:122 (2.0L)- Integrated Bypass Valve For Little To No Decrease In Fuel Economy
Showing 19609–19620 of 43050 results