-
Adjust front camber and caster +-1.5deg on the Audi B8 and C7 platforms with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, & harshness (NVH) parameters. Audi’s unique multi-link suspension creates a ‘Virtual’ SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. This kit includes two arms to replace the front upper arms on the left hand (LH) side. For the right hand (RH) side, use part number #81362. Want to be able to adjust both sides? Use part number #81363. SPC Arms Feature: Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts included Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- OE style bushing and ball joint maintain factory feel and noise reduction
- Forged 6051-T6 aluminum for strength and weight reduction
- Adjusts camber and caster plus or minus 1.5 degrees
- Kit includes both arms for the LEFT side only
- Comes with pinch bolt hardware
-
Adjust front camber and caster +-1.5deg on the Audi B8 and C7 platforms with these forged aluminum control arms from SPC. OE syle booted ball joints and bonded rubber bushings maintain factory ride, handling, and noise, vibration, & harshness (NVH) parameters. Audi’s unique multi-link suspension creates a ‘Virtual’ SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. This kit includes two arms to replace the two front upper arms on the right hand (RH) side. For the left hand (LH) side, use part number #81361. Want to be able to adjust both sides? Use part number #81363. SPC Arms Feature: Forged 6061-T6 Aluminum construction formaximized strength at a minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts included Need to replace the ball joint boots on these arms? We have replacement kitsavailable! Part No. 81354. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- OE style bushing and ball joint maintain factory feel and noise reduction
- Forged 6051-T6 aluminum for strength and weight reduction
- Adjusts camber and caster plus or minus 1.5 degrees
- Kit includes both arms for the RIGHT side only
- Comes with pinch bolt hardware
-
Get ready for the track with this four (4) arm set of adjustable upper links for the Audi B8 and C7 platforms. This kit has four arms so you can change camber and caster +-1.5deg on both sides. xAxis sealed flex joints replace the compliant inner bushings with a free pivoting, minimum compliance joint. You will feel the difference in handling. SPC Arms feature: Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts xAxis sealed flex joints replacing overly compliant OE inner bushings with a free pivoting, minimum compliance joint Don’t need the added benefits of our performance arms? Use SPC arms with OE type bushings – part #81363 for two sets of arms to correct both sides of the vehicle, #81361 for the left side, or part #81362 for the right. Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354. Warning: You will also hear the difference, the OE bushings are designed to absorb and negate noise, vibration, and harshness (NVH). This set of arms will transmit road noise into the cabin. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented. -
Adjust camber in the rear of many popular VW and Audi models +-3deg with this fully adjustable rear camber arm from SPC. The forged steel arm and double threaded adjuster offer the strength and on-car adjustment needed for the track or simply getting tiresback to factory specifications. SPC’s arm uses bonded rubber bushings to maintain factory noise, vibration, and harshness (NVH) values. Use the included bracket to properly secure the factory ABS wire. The arm is sold each and can be used for either the right or left hand side. Be sure to order two kits if you need adjustment on both sides. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented. -
Replace the rear camber and toe links on your S550 Mustang with SPC’s forged aluminum adjustable links and be confident you will have the most change and lightest weight, with uncompromised strength and clearances. Designed, engineered, tested, and assembled in Colorado, SPC’s forged aluminum links will provide: -3 to +2 degrees of camber adjustment and +-3 degrees of additional toe compared to the OE cam. This set includes 2 each of the 72370 and 72380, see individual part descriptions for full details.This is a four (4) arm set. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- Adjusts camber plus 2.0 degrees to minus 3.0 Degrees and toe plus or minus 3 degrees
- Stronger, more robust arm than the OE arm
- Reduced weight vs the OE arm
- One kit per axle
-
Get ready for the track with this four (4) arm set of adjustable upper links for the Audi B9 platform. This kit has four arms so you can change camber and caster +-1.5deg on both sides. xAxis sealed flex joints replace the compliant inner bushings with a free pivoting, minimum compliance, joint. You will feel the difference in handling. Forged 6061-T6 Aluminum construction for maximized strength at minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjusterlinks Replacement pinch bolts included xAxis sealed flex joints replacing overly compliant OE inner bushings with a free pivoting, minimum compliance joint. Warning: You will also hear the difference, the OE bushings are designed to absorb and negate noise, vibration, and harshness (NVH). This set of arms will transmit road noise into the cabin. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- Kit includes both arms for both sides of the vehicle, order one kit per vehicle
- xAxis racing style sealed flex joints for reactive handling
- Forged 6051-T6 aluminum for strength and weight reduction
- Adjusts camber and caster plus or minus 1.5 degrees
- Comes with pinch bolt hardware
-
Designed, engineered, tested, and assembled in Colorado, SPC Performance adjustable upper control arms are loaded with impressive features. Improve suspension travel, handling, and tire wear while centering the tire in the wheel well for maximum clearance needed for oversized tires. Now equipped with maintenance-free ball joints and free-pivoting xAxis™ sealed flex joints in bonded rubber sleeves, for correction of alignment angles and restoration of factory ride quality. A Forged steel design provides the strength and durability needed for the most demanding environments. SPC adjustable control arms have improved clearance to get around the spring bucket and a full 80° of articulation in the ball joint. When trucks are lifted, caster and camber angles are affected that can lead to poor handling characteristics such as ‘wandering’. SPC control arms have positive caster built-in for lifted vehicles to restore alignment angles and drivability. The patented ball joint design gives more adjustability than any other arm on the market, use it in combination with cam adjusters on the lower arm to maximize tire clearance and minimize the need for frame mods. Use SPC #63020 to adjust thrust angle, replace OE lower cams with #86220. Sold as pairs. US Patent No. 7,513,514.
Adjustable front upper control arms for the Ford Ranger with chromoly tube steel construction, sealed modern architecture ball joints, and xAxis™ sealed flex joint joints in bonded rubber bushings
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- New ball joint has 25% larger stud cross section than OE for superior strength & E-Nickel coating for superior corrosion protection while providing 80° of articulation & extended threads make these arms compatible with knuckle gusset kits
- Arm’s adjustment range combine with OE adjusters corrects alignment angles for improved driveability and reduced tire wear & possible to move the tire forward to maximize clearance for larger tires without frame or fender modifications
- One piece polymer race Ball Joint with modern grease formula ensures quiet smooth operation & low turning torque for reduced wear and extended life that tests like OE
- New xAxis™ sealed flex joints in bonded rubber bushings allow for extended suspension travel & superior noise vibration and harshness (NVH) characteristics
- Chromoly tube and forged steel nose construction provides maximum strength & clearance with additional caster provision for lifted vehicles built-in
- New fully sealed ball joint architecture keeps grease in and contaminants out for a maintenance-free joint
- Front Adjustment Range: Camber ±2.00° / Caster -1.00° to +3.00°
- Required: 1 per axle
- Sold as a pair
-
Designed, engineered, tested, and assembled in Colorado, SPC Performance adjustable upper control arms are loaded with features. Improve suspension travel, handling, and tire wear while centering the tire in the wheel well for maximum clearance needed for oversized tires. Now equipped with maintenance-free ball joints and free-pivoting xAxis™ sealed flex joints in bonded rubber sleeves, for correction of alignment angles and restoration of factory ride quality. A Forged steel design provides the strength and durability needed for the most demanding environments. SPC adjustable control arms have improved clearance to get around the spring bucket and a full 80° of articulation in the ball joint. When trucks are lifted, caster and camber angles are affected that can lead to poor handling characteristics such as ‘wandering’. SPC control arms have positive caster built-in for lifted vehicles to restore alignment angles and drivability. The patented ball joint design allows the tire to be positioned correctly in the wheel well and additional adjustment in the OE lower arms can maximize placement for oversized tires to avoid fender trimming. If replacement lower adjustment cams are needed, see part #86250 or #86252. Sold as pairs. US Patent No. 7,513,514.
Adjustable front upper control arms for the Ford F-150 with forged steel construction, sealed modern architecture ball joints, and xAxis™ sealed flex joint joints in bonded rubber bushings
Product appearance and features may vary in the market as design changes improvements and modifications are implemented.- Arm’s adjustment range combine with OE adjusters corrects alignment angles for improved drivability and reduced tire wear & allows the tire to move forward to maximize clearance for larger tires without frame or fender modifications
- New ball joint has 25% larger stud cross section than OE for superior strength & E-Nickel coating for superior corrosion protection while providing 80° of articulation
- One piece polymer race Ball Joint with modern grease formula ensures quiet smooth operation & low turning torque for reduced wear and extended life that tests like OE
- New xAxis™ sealed flex joints in bonded rubber bushings allow for extended suspension travel & superior noise vibration and harshness (NVH) characteristics
- Forged steel arm construction provides maximum strength & clearance with additional caster provision for lifted vehicles built-in
- New fully sealed ball joint architecture keeps grease in and contaminants out for a maintenance-free joint
- Front Adjustment Range: Camber ±2.0° / Caster 0° to +4.0 °
- Required: 1 per axle
- Sold as a pair
-
Modern radial tires require alignment specifications that differ from the original factory specs developed for bias ply tires. For caster, SPC recommends +3.00° of caster to promote improved return-to-center and more responsive performance. Stock strut rods on the 1st generation Mustangs and FoMoCo vehicles are non-adjustable and often have worn out bushings that can cause excessive movement of the lower rod assembly, resulting in poor handling. A must for ‘68 -’73 Mustangs on modern rubber, this adjustable caster rod features high durometer OE-style bushings to protect the chassis mount from damage and has easy caster adjustment. It will provide the positive caster needed for improved tracking and modern geometry. If adjustable camber is desired, look to the SPC complete control arm kit # 94219.
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- High Durometer Rubber & Easy Adjustment
- Front Adjustment Range: Caster ±2.00°
- Required: 1 per axle
- Sold as a pair
-
This pair of rear lower control arms are direct replacements for weak or bent factory units on the 80 series Landcruiser. Made of 3/16″ wall DOM tube, they are more than 2x stronger than the OEM arms! They are equipped with a rubber bushing in one end for isolation of axle noise, with a xAxis sealed flex joint in the other end for superior flexibility off road. Whether you are replacing damaged OE parts or upgrading for off road use, these are the arms for you. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- Increasesarticulationwith xAxis sealed flex joint.
- 3/16′ wall DOM steel tube construction
- Direct replacement for OE arms
- 2x stronger than the OEM arms
-
These billet aluminum arms fit the 3-Series (E36/E46/E85) along with the new Z4, giving you -1.0 to +3.0 degrees of rear camber change. Great for these popular tuner vehicles, these machined parts are in a stand-out silver anodized finish with SPC “Red”nuts. Our standard EZ Arm (#67110) for BMWs is also available. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented. -
SPC Performance 98-07 Lexus LX470/Toyota Landcruiser(100 Series) AWD/4WD Adjustable Front Upper Arms
Designed, engineered, tested, and assembled in Colorado, SPC Performance adjustable upper control arms are loaded with impressive features. Improve suspension travel, handling, and tire wear while centering the tire in the wheel well for maximum clearance needed for oversized tires. Now equipped with maintenance-free ball joints and free-pivoting xAxis™ sealed flex joints in bonded rubber sleeves, for correction of alignment angles and restoration of factory ride quality. A Forged steel design provides the strength and durability needed for the most demanding environments. SPC adjustable control arms have improved clearance to get around the spring bucket and a full 80° of articulation in the ball joint. When trucks are lifted, caster and camber angles are affected that can lead to poor handling characteristics such as ‘wandering’. SPC control arms have positive caster built-in for lifted vehicles to restore alignment angles and drivability. The patented ball joint design gives more adjustability than any other arm on the market. Looking for rear lower control arms for your LC 100, consider #25955. Sold as pairs. US Patent No. 7,513,514.
Adjustable front upper control arms for the LX 470 AND LC 100 with chromoly tube steel construction, sealed modern architecture ball joints, and xAxis™ sealed flex joint joints in bonded rubber bushings
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- New ball joint has 25% larger stud cross section than OE for superior strength & E-Nickel coating for superior corrosion protection while providing 80° of articulation & extended threads make these arms compatible with knuckle gusset kits
- Arm’s adjustment range, combine with OE adjusters corrects alignment angles for improved driveability and reduced tire wear & possible to move the tire forward to maximize clearance for larger tires without frame or fender modifications
- One piece polymer race Ball Joint with modern grease formula ensures quiet smooth operation & low turning torque for reduced wear and extended life that tests like OE
- New xAxis™ sealed flex joints in bonded rubber bushings allow for extended suspension travel & superior noise vibration and harshness (NVH) characteristics
- Chromoly tube and forged steel nose construction provides maximum strength & clearance with additional caster provision for lifted vehicles built-in
- New fully sealed ball joint architecture keeps grease in and contaminants out for a maintenance-free joint
- Front Adjustment Range: Camber ±2.00° / Caster 0.00° to +4.00°
- Required: 1 per axle
- Sold as a pair
Showing 19417–19428 of 21632 results