Shop

The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO9108 is specifically engineered for the 2011-2014 Ford F-150 with the 5.0L engine. Every EVO9108 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. The box has a forward facing ram air scoop to provide fresh, clean air to your engine. This intake system also includes stainless steel hardware and automotive grade urethane couplers. No cutting or drilling is required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO9108 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO9108 system features our 2-piece box design that incorporates our boost plenum, a massive SuperNano-Web dry air filter, a smooth 6061 aluminum induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen’s proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25″deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO9108 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can’t be stopped?.. Roto-molded Housing and Boost Plenum; The EVO9108 system features our 2-piece box design that incorporates our boost plenum. Designed 100% in 3D ensures a hassle free, drop-in installation ? this intake system attaches directly to the original factory airbox. Forward facing ram air scoop to provide cool, fresh air to your hungry turbos! , ,
Evolution Series Air Induction System; Incl. Roto-Molded Housing W/Boost Plenum And Intake Tube/SuperNano-Web Dry Filter/Hardware; HP Gains +17 HP/Torque Gains +16 ft./lbs. ;

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Attaches directly to the factory airbox for a drop-in installation
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 17 hp and 16 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1129-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
SP Short Ram Intake System, Part No. SP3009BLK, 2013-2014 Volkswagen Beetle L4-2.0L(td), 2010-2014 Volkswagen Golf L4-2.0L(td), 2010-2015 Volkswagen Jetta L4-2.0L(td).
VW 2010-14 MKVI Golf/Jetta TDI 2.0L Turbo diesel Tuned intake w/MR Tech; SuperNano-web Dry filter with heat shield

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Includes custom heat shield w/cover specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 10 hp and 24 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1033BLK or 1033RED
• Provides power gains while maintaining A/F ratios
• Replacement air filter part number X-1014-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque Up To 27 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Short Ram Air Intake Design

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
SP Short Ram Intake System, Part No. SP3009P, 2013-2014 Volkswagen Beetle L4-2.0L(td), 2010-2014 Volkswagen Golf L4-2.0L(td), 2010-2015 Volkswagen Jetta L4-2.0L(td).
VW 2010-14 MKVI Golf/Jetta TDI 2.0L Turbo diesel Tuned intake w/MR Tech; SuperNano-web Dry filter with heat shield

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Includes custom heat shield w/cover specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 10 hp and 24 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1033BLK or 1033RED
• Provides power gains while maintaining A/F ratios
• Replacement air filter part number X-1014-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque Up To 27 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Short Ram Air Intake Design

Introducing the all-new Evolution sealed air intake system Part Number EVO2202C for the Toyota 4Runner and FJ Cruiser V6 4.0L! This intake was designed using state of the art engineering tools and techniques to produce the finest quality kit that is unmatched in the aftermarket. From the one-piece sealed housing that utilizes our all new Injen Twist-Lock System to securely attach a massive 8-layer Oiled Cotton Gauze air filter in place all the way down to the premium hardware, Injen has put it all on the table to give you the best intake on the market. Here is the best part, there is no cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box!, , Roto-molded Housing; The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the 8-Layer Oiled Cotton Gauze air filter in place which eliminates the use of unnecessary parts and provides one of the simplest installations available. The EVO2202C housing also sports the all-new Injen Clear-View badge for a cleaner more aggressive under hood appearance. Integrated Ram Air Scoop; The EVO2202C comes complete with our integrated fully functional ram air scoop. The included Urethane Plug can be installed when you’re taking on the toughest terrain to ensure your engine doesn’t come into contact with harmful debris or water. This scoop feeds that hungry V6 with cool, fresh air for maximum performance!, , Roto-molded Intake Tube; The EVO2202C Evolution Air Intake System uses a custom designed and dyno-tuned, intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights., ,
EVOLUTION Cold Air Intake System, Part No. EVO2202C, 2010-2023 Toyota 4Runner V6-4.0L, 2010-2014 Toyota FJ Cruiser V6-4.0L.

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Injen Clear-Vue Window allows you to check the condition of your air filter without the need to remove it.
• Twist-Lock Technology to securely integrate the air filter to the housing
• Included Urethane Plug to seal ram air scoop in off-road wet conditions
• Ram air scoop is designed to capture the largest amount of cool air
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive under hood appearance while maintaining an OE fit
• Fits in factory mounting locations for simple installation
• Optional Injen air filter cleaning kit part number X-1030
• Dyno Proven gains of up to 13 hp and 15 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Durable Roto-Molded Polyethylene construction
• Reinforced automotive grade silicone couplers
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA

Introducing the all-new Evolution sealed air intake system Part Number EVO2202 for the Toyota 4Runner and FJ Cruiser V6 4.0L! This intake was designed using state of the art engineering tools and techniques to produce the finest quality kit that is unmatched in the aftermarket. From the one-piece sealed housing that utilizes our all new Injen Twist-Lock System (Patent Pending) to securely attach a massive SuperNano-Web Dry air filter in place all the way down to the premium hardware, Injen has put it all on the table to give you the best intake on the market. Here is the best part, there is no cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box; Roto-molded Housing; The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place which eliminates the use of unnecessary parts and provides one of the simplest installations available. The EVO2202 housing also sports the all-new Injen Clear-View badge for a cleaner more aggressive under hood appearance. Integrated Ram Air Scoop; The EVO2202 comes complete with our integrated fully functional ram air scoop. The included Urethane Plug can be installed when you’re taking on the toughest terrain to ensure your engine doesn’t come into contact with harmful debris or water. This scoop feeds that hungry V6 with cool, fresh air for maximum performance when you need it most!, , Roto-molded Intake Tube; The EVO2202 Evolution Air Intake System uses a custom designed and dyno-tuned, intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights., ,
EVOLUTION Cold Air Intake System, Part No. EVO2202, 2010-2023 Toyota 4Runner V6-4.0L, 2010-2014 Toyota FJ Cruiser V6-4.0L.

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Injen Clear-Vue Window allows you to check the condition of your air filter without the need to remove it.
• Twist-Lock Technology to securely integrate the air filter to the housing
• Included Urethane Plug to seal ram air scoop in off-road wet conditions
• Ram air scoop is designed to capture the largest amount of cool air
• Aggressive under hood appearance while maintaining an OE fit
• Fits in factory mounting locations for simple installation
• Dyno Proven gains of up to 13 hp and 15 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Durable Roto-Molded Polyethylene construction
• Reinforced automotive grade silicone couplers
• Designed and Built in Pomona California, USA
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1119BLK

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Short Ram Air Intake System; Incl. Tubing/Filter/Front Scoop/Hardware/Instruction; w/MR Technology And Air Fusion; HP Gains +15.0 HP/Torque Gains +18.0 ft. lbs.; Polished;
BMW 2011-2013 (E82/88) 135i L6-3.0L Turbo N55 Tuned intake w/MR Tech.; Air Fusion; front air scoop and nano-fiber dry filters CARB E.O. 2011-2012 Models Only

• Fully functional ram air scoop directs cool air into the air filter
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 15 hp and 18 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1037BLK or 1037RED
• Provides power gains while maintaining A/F ratios
• Features Injen’s patented Air Fusion Technology
• CARB EO # applies to 2011-2012 model years only
• Replacement air filter part number X-1021-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque Up To 18 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Short Ram Air Intake Design
• CARB EO #: D-476-8

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
Short Ram Air Intake System; Incl. Tubing/Filter/Front Scoop/Hardware/Instruction; w/MR Technology And Air Fusion; HP Gains +15.0 HP/Torque Gains +18.0 ft. lbs.; Wrinkle Black;
BMW 2011-2013 (E82/88) 135i L6-3.0L Turbo N55 Tuned intake w/MR Tech.; Air Fusion; front air scoop and nano-fiber dry filters CARB E.O. 2011-2012 Models Only

• Fully functional ram air scoop directs cool air into the air filter
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 15 hp and 18 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1037BLK or 1037RED
• Provides power gains while maintaining A/F ratios
• Features Injen’s patented Air Fusion Technology
• CARB EO # applies to 2011-2012 model years only
• Replacement air filter part number X-1021-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque Up To 18 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Short Ram Air Intake Design
• CARB EO #: D-476-8

Injen likes to keep things cool, so the air filter is positioned in the best possible location to keep that unwanted hot air from entering your intake. This helps drop air intake temperatures and feed cool, dense air to that hungry engine. This Injen PF intake kit includes everything that is required for a direct-fit installation. Just like all of Injen’s cold air intake systems, this PF Cold air Intake kit includes the unbeatable Injen limited Lifetime Warranty. Rest assured that all of your Injen parts are performing perfectly for as long as you own them!
Power-Flow Air Intake System; Incl. Tubing/Filter w/Inertia Top/Hardware/Instruction; w/MR Technology; HP Gains +14.0 HP/Torque Gains +18.0 ft. lbs.; Polished;
Chrysler 2011-2017 300 3.6L V6 Pentastar Tuned short ram air intake system with MR Technology; Super NanoWeb dry filter with Inertia Top

• Provides power gains while maintaining A/F ratios with no additional tuning
• Smooth intake piping eliminates restrictions and improves airflow
• Available with multiple finish options (select applications)
• Dyno Proven gains of up to 14 hp and 18 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1037BLK or 1037RED
• Replacement air filter part number X-1021-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque Up To 18ft./lbs.
• 6061-T6 aluminum intake tubing
• Made in Pomona California, USA
• CARB EO# D-476-11

Injen likes to keep things cool, so the air filter is positioned in the best possible location to keep that unwanted hot air from entering your intake. This helps drop air intake temperatures and feed cool, dense air to that hungry engine. This Injen PF intake kit includes everything that is required for a direct-fit installation. Just like all of Injen’s cold air intake systems, this PF Cold air Intake kit includes the unbeatable Injen limited Lifetime Warranty. Rest assured that all of your Injen parts are performing perfectly for as long as you own them!
Power-Flow Air Intake System; Incl. Tubing/Filter w/Inertia Top/Hardware/Instruction; w/MR Technology; HP Gains +14.0 HP/Torque Gains +18.0 ft. lbs.; Wrinkle Black;
Chrysler 2011-2017 300 3.6L V6 Pentastar Tuned short ram air intake system with MR Technology; Super NanoWeb dry filter with Inertia Top

• Provides power gains while maintaining A/F ratios with no additional tuning
• Smooth intake piping eliminates restrictions and improves airflow
• Available with multiple finish options (select applications)
• Dyno Proven gains of up to 14 hp and 18 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1037BLK or 1037RED
• Replacement air filter part number X-1021-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque Up To 18ft./lbs.
• 6061-T6 aluminum intake tubing
• Made in Pomona California, USA
• CARB EO# D-476-11

The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO9105 is specifically engineered for the 2011-2014 Ford F-150 with the 3.5L EcoBoost engine. Every EVO9105 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. The box has a forward facing ram air scoop to provide fresh, clean air to your engine. This intake system also includes stainless steel hardware and automotive grade urethane couplers. No cutting or drilling is required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO9105 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO9105 system features our 2-piece box design that incorporates our boost plenum, a massive SuperNano-Web dry air filter, a smooth Rotomolded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen’s proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25″deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO9105 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can’t be stopped?.. Roto-molded Housing and Boost Plenum; The EVO9105 system features our 2-piece box design that incorporates our boost plenum. Designed 100% in 3D ensures a hassle free, drop-in installation. Forward facing ram air scoop to provide cool, fresh air to your hungry turbos! , ,
Evolution Series Air Induction System; Incl. Roto-Molded Housing W/Boost Plenum And Intake Tube/SuperNano-Web Dry Filter/Hardware; HP Gains +18 HP/Torque Gains +21 ft./lbs. ;

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Attaches directly to the factory airbox for a drop-in installation
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 18 hp and 21 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1129-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA