-
Looking to improve the handling of your vehicle? Our ST Anti-sway Bars are the ideal solution. By upgrading the anti-sway bars you reduce the amount of body roll and ensure improved handling while providing better traction. ST Anti-sway Bars improve the driving dynamics of your vehicle and complete your suspension upgrade. Our ST Anti-sway Bars are made of cold-formed heavy duty aircraft steel. The reduction in the wheel load differential between the outer and inner wheel in a curve will be immediately noticeable. Depending on the vehicle, some of our ST Anti-sway Bars are adjustable to give you the freedom to fine tune the force and further improve your vehicle’s lateral stability and cornering grip. Our high performance ST Anti-sway Bars go through multiple quenching and tempering processes along with a final epoxy coating to maximize the protection from extreme weather and road debris. Not only do they look good, they are also built to last.
Due to the improved lateral control, reduced tendency for body roll, and the minimized load differences between the outside and inside the wheel in a turn; you will feel more direct handling when going into curves or with fast load changes.
The versatile and adjustable ST anti-sway bars effectively minimize body roll, enhancing both traction and vehicle handling.
2014-2020 BMW 4 Series F32, F33, F36; Sedan, Conv., Gran Coupe 2WD 2.0T(4cyl.), 3.0T(6 cyl.)- Greatly improve handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside tires.
- Manufactured from high quality spring steel and finished with a durable powder coating for a long lasting finish.
- High quality composite bushings reduce deflection and improve load transfer.
- Improve balance by dialing out under or oversteer.
- Multiple adjustments when possible.
- More direct steering behavior.
- Increased traction.
- Made In the USA
-
Looking to improve the handling of your vehicle? Our ST Anti-sway Bars are the ideal solution. By upgrading the anti-sway bars you reduce the amount of body roll and ensure improved handling while providing better traction. ST Anti-sway Bars improve the driving dynamics of your vehicle and complete your suspension upgrade. Our ST Anti-sway Bars are made of cold-formed heavy duty aircraft steel. The reduction in the wheel load differential between the outer and inner wheel in a curve will be immediately noticeable. Depending on the vehicle, some of our ST Anti-sway Bars are adjustable to give you the freedom to fine tune the force and further improve your vehicle’s lateral stability and cornering grip. Our high performance ST Anti-sway Bars go through multiple quenching and tempering processes along with a final epoxy coating to maximize the protection from extreme weather and road debris. Not only do they look good, they are also built to last.
Due to the improved lateral control, reduced tendency for body roll, and the minimized load differences between the outside and inside the wheel in a turn; you will feel more direct handling when going into curves or with fast load changes.
The versatile and adjustable ST anti-sway bars effectively minimize body roll, enhancing both traction and vehicle handling.
2014-2020 BMW 4 Series F32, F33, F36; Sedan, Conv., Gran Coupe 2WD 2.0T(4cyl.), 3.0T(6 cyl.)- Greatly improve handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside tires.
- Manufactured from high quality spring steel and finished with a durable powder coating for a long lasting finish.
- High quality composite bushings reduce deflection and improve load transfer.
- Improve balance by dialing out under or oversteer.
- Multiple adjustments when possible.
- More direct steering behavior.
- Increased traction.
- Made In the USA
-
The XTA plus 3 coilover kit gives your car maximum performance for the road and the tools you need for any challenge. From the factory, the XTA plus 3 coilover kit is equipped with KW dampers that are adjustable in high-speed and low- speed compression as well as adjustable rebound damping. With 24 clicks of adjustment for each, high-speed and low-speed compression damping and 18 clicks of rebound adjustment, your suspension knows no limits. It doesn’t matter if you bolt in an aftermarket roll cage, weld in a cage, upgrade to spherical bushing or changed wheel loads – the XTA plus 3 coilover has what it takes to keep your car dialed! Of course, the XTA plus 3 also includes a parts approval certificate, race springs and aluminium unibal top mounts. Easy lowering adjustment: Like all ST coilovers the ride height adjustment is made via seamless thread on the galvanized strut housing. This even allows the ride height to be adjusted even when the kit is installed by adjustubg the spring perch higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA plus 3 coilovers due to the type of construction. KW Engineering: Exclusive for ST suspension. The high-quality ST XTA plus 3 coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.
The most versatile ST coilover kit ever built. Seamless ride height adjustability, aluminum unibal top mounts, 24 clicks of low-speed and high-speed compression adjustability, 18 clicks of rebound adjustability put you in absolute control!
ST Coilover Kits enable you to individually adjust the ride height of your car to improve the appearance and driving behavior. Depending on your selection, ST coilover kits offer a wide range of adjustments giving you the tools needed to dial them into your requirements.
2015-2018 BMW M3 (F80) Sedan incl M3 CS- Elastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.
- Composite spring perch made from wear-resistant, friction-optimized polyamide composite with an embedded stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.
- ST coilovers are built by hand by the experts at KW in Fichtenberg, Germany. Each damper is tested on a shock dyno to verify it’s making the proper forces before being put into the ST box.
- Seamless Ride Height Adjustment – ST’s composite spring perch and unique trapezoidal thread pitch make ride height adjustability a breeze so you can dial in your preferred look.
- From the factory, the XTA plus 3 coilover kit is equipped with KW dampers that are adjustable in high- and lowspeed compression as well as adjustable rebound damping.
- Linear race spring system provides a consistent response while driving and makes it easy to swap rates to further personalize your setup.
- Aluminum unibal top mounts improve steering response and feedback while allowing you to dial in your camber when applicable.
- Galvanized steel housing for improved resistance to corrosion.
- 5 Year Limited Warranty – Unlimited Mileage
- Made in Germany
-
Our ST Adjustable Lowering Springs allow seamlessly adjustable lowering on vehicles with or without electronically adjustable dampers. They essentially turn any standard suspension into a coilover kit! Our new ST Adjustable Lowering Springs are now available for a variety of makes and models. The innovative ST threaded sleeve provides perfect fitment no matter if your car is equipped with standard shocks or an electronically adaptive damping system. With our ST Adjustable Lowering Springs, it’s easy to convert your stock suspension into a height adjustable system. Similar to coilover kits, the ST Adjustable Lowering Springs allow a seamless ride height adjustment for your vehicle in reasonable lowering ranges. We supply vehicle specific dust protection and spring components that are designed to give you the most out of your lowering. With ST Adjustable Lowering Springs you can expect a dynamic and sporty driving experience. At ST suspensions, your driving experience is the main focus when it comes to our products. That is why we select vehicle specific spring rates in each ST Adjustable Lowering Spring kit to perfectly match your original dampers. Our Adjustable Lowering Springs are made out of chrome silicon steel to guarantee a long lasting and quality driving experience. You will not only benefit from a lowered center of gravity and more direct handling but also improved steering and more stability during cornering. ST suspensions springs are constructed to OEM quality standards. They are made of high strength chrome silicon steel in a cold winding process then multi-tempered and have a final epoxy coating. This process helps resistance to different weather conditions. The high strength ST spring steel also ensures that our ST springs are block resistant and the springs do not sag.
ST Adjustable Lowering Springs provide perfect fitment whether your car is equipped with a standard or an electronic damper system. With ST Adjustable Lowering Springs, convert your stock suspension into a height adjustable system.
Our ST Adjustable Lowering Springs allow for seamless height adjustment on vehicles equipped with or without electronically adjustable dampers. Essentially, they transform any standard suspension into a coilover kit! ST Adjustable Lowering Springs benefit from KW quality, drawing from years of experience in motorsport and street suspension components.
2018+ BMW M5 (F90) Sedan; 4WD- ST adjustable lowering springs transform your standard suspension into a coilover and you can continue to use your electronic damper adjustment if the car is equipped with it.
- Springs made of chrome-silicon steel guarantee a more direct driving experience thanks to their application specific spring rates
- Individually height adjustable like a traditional coilover
- Improved looks thanks to the lower ride height
- Limited Lifetime Warranty – Unlimited Mileage
- Made in Germany
-
Looking for maximum performance for your car? Our adjustable ST XTA Coilover kits are the upgrade you need. All ST XTA systems are delivered with a linear race springs system, adjustable dampers, and aluminum unibal camber adjustable top mounts. ST XTA Coilover kits deliver precise adjustment to your ride height so you control the look of your car. We manufacture the adjustable spring perch made of durable and friction-optimized polyamide composite material with a stainless steel insert. Thanks to the composite material corrosion is prevented between the strut and perch ensuring long lasting height adjustability while the stainless steel insert provides strength and confidence! ST XTA Coilovers come preset to our factory recommended damper settings, the same configuration we test them at on our KW shock dynos before they go into your box. The 16 distinct clicks of adjustable rebound damping allow you to refine the driving dynamics with a simple turn of the adjustment knob. Each kit includes a detailed damper setup manual making it easy to reset to our recommended setting at any time. Whether your preference is comfort, performance, or something in between; ST XTA puts the finer details of the driving dynamics in your hands. The top mounts included with our ST XTA Coilover kits allow you to adjust the camber at the front axle to dial in aggressive wheel and tire fitment. They also allow you to maximize the tire’s contact patch for driving in fast corners and any other driving scenario that demands maximum grip. Galvanized zinc coated steel struts optimize corrosion protection for long lasting use. We add a dust protection system to prevent unwanted dirt and particulate from coming in contact with the hardened chrome piston rod or getting into the valve packs. We reinforce the system with a multi-layered pressure resistant sealing package, mono block guide system and a low friction piston band which works inside the pressure resistant internal damper housing.
ST XTA Coilovers allow you to maximize the driving dynamics of your car if you are a sporty ambitious driver. With the linear race springs, adjustable dampers, and aluminum unibal top mounts, you can dail in the cars behavior easily.
ST Coilover Kits enable you to individually adjust the ride height of your car to improve the appearance and driving behavior. Depending on your selection, ST coilover kits offer a wide range of adjustments giving you the tools needed to dial them into your requirements.
2001-2006 BMW M3 (E46) Coupe + Convertible 3.2 (6cyl.)- Elastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.
- Composite spring perch made from wear-resistant, friction-optimized polyamide composite with an embedded stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.
- ST coilovers are built by hand by the experts at KW in Fichtenberg, Germany. Each damper is tested on a shock dyno to verify it’s making the proper forces before being put into the ST box.
- Seamless Ride Height Adjustment – ST’s composite spring perch and unique trapezoidal thread pitch make ride height adjustability a breeze so you can dial in your preferred look.
- Linear race spring system provides a consistent response while driving and makes it easy to swap rates to further personalize your setup.
- Aluminum unibal top mounts improve steering response and feedback while allowing you to dial in your camber when applicable.
- ST XTA coilovers feature adjustable rebound damping which puts you in control of how comfortable or sporty your car feels.
- Galvanized steel housing for improved resistance to corrosion.
- 5 Year Limited Warranty – Unlimited Mileage
- Made in Germany
-
For all those who want to influence more than just their ride height. ST XA Coilovers deliver the look you need through a wide range of height adjustment. With an extensively adjustable damper setup, you can precisely adjust the driving behavior of your car to achieve enhanced road control without a compromise in comfort. ST XA Coilover kits deliver precise adjustment to your ride height and look of your car. We manufacture the adjustable spring perch made of durable and friction-optimized polyamide composite material with a stainless steel insert. Thanks to the composite material corrosion is prevented between the strut and perch ensuring long lasting height adjustability while the stainless steel insert provides strength and confidence! ST XA Coilovers come preset to our factory recommended damper settings, the same configuration we test them at on our KW shock dynos before they go into your box. The 16 distinct clicks of adjustable rebound damping allow you to refine the driving dynamics with a simple turn of the adjustment knob. Each kit includes a detailed damper setup manual making it easy to reset to our recommended setting at any time. Whether your preference is comfort, sportiness, or something in between; ST XA puts the finer details of the driving dynamics in your hands. Galvanized zinc coated steel struts optimize corrosion protection for long lasting use. We add a dust protection system to prevent unwanted dirt and particulate from coming in contact with the hardened chrome piston rod or getting into the valve packs. We reinforce the system with a multi-layered pressure resistant sealing package, mono block guide system and a low friction piston band which works inside the pressure resistant internal damper housing.
ST XA Coilovers deliver the look you need through a wide range of height & damping adjustment. Precisely adjust the driving behavior of your car to achieve enhanced road control without compromising comfort.
ST Coilover Kits enable you to individually adjust the ride height of your car to improve the appearance and driving behavior. Depending on your selection, ST coilover kits offer a wide range of adjustments giving you the tools needed to dial them into your requirements.
2000-2006 Audi TT & TT Roadster (8N) Quattro 1.8T (4cyl.)- Elastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.
- Composite spring perch made from wear-resistant, friction-optimized polyamide composite with an embedded stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.
- ST coilovers are built by hand by the experts at KW in Fichtenberg, Germany. Each damper is tested on a shock dyno to verify it’s making the proper forces before being put into the ST box.
- Seamless Ride Height Adjustment – ST’s composite spring perch and unique trapezoidal thread pitch make ride height adjustability a breeze so you can dial in your preferred look.
- Linear race spring system provides a consistent response while driving and makes it easy to swap rates to further personalize your setup.
- Aluminum unibal top mounts improve steering response and feedback while allowing you to dial in your camber when applicable.
- ST XTA coilovers feature adjustable rebound damping which puts you in control of how comfortable or sporty your car feels.
- Galvanized steel housing for improved resistance to corrosion.
- 5 Year Limited Warranty – Unlimited Mileage
- Made in Germany
-
Looking for maximum performance for your car? Our adjustable ST XTA Coilover kits are the upgrade you need. All ST XTA systems are delivered with a linear race springs system, adjustable dampers, and aluminum unibal camber adjustable top mounts. ST XTA Coilover kits deliver precise adjustment to your ride height so you control the look of your car. We manufacture the adjustable spring perch made of durable and friction-optimized polyamide composite material with a stainless steel insert. Thanks to the composite material corrosion is prevented between the strut and perch ensuring long lasting height adjustability while the stainless steel insert provides strength and confidence! ST XTA Coilovers come preset to our factory recommended damper settings, the same configuration we test them at on our KW shock dynos before they go into your box. The 16 distinct clicks of adjustable rebound damping allow you to refine the driving dynamics with a simple turn of the adjustment knob. Each kit includes a detailed damper setup manual making it easy to reset to our recommended setting at any time. Whether your preference is comfort, performance, or something in between; ST XTA puts the finer details of the driving dynamics in your hands. The top mounts included with our ST XTA Coilover kits allow you to adjust the camber at the front axle to dial in aggressive wheel and tire fitment. They also allow you to maximize the tire’s contact patch for driving in fast corners and any other driving scenario that demands maximum grip. Galvanized zinc coated steel struts optimize corrosion protection for long lasting use. We add a dust protection system to prevent unwanted dirt and particulate from coming in contact with the hardened chrome piston rod or getting into the valve packs. We reinforce the system with a multi-layered pressure resistant sealing package, mono block guide system and a low friction piston band which works inside the pressure resistant internal damper housing.
ST XTA Coilovers allow you to maximize the driving dynamics of your car if you are a sporty ambitious driver. With the linear race springs, adjustable dampers, and aluminum unibal top mounts, you can dail in the cars behavior easily.
ST Coilover Kits enable you to individually adjust the ride height of your car to improve the appearance and driving behavior. Depending on your selection, ST coilover kits offer a wide range of adjustments giving you the tools needed to dial them into your requirements.
2006-2012 BMW 3 Series (E91) Sports Wagon 2WD 325i+328i (6cyl.)- Elastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.
- Composite spring perch made from wear-resistant, friction-optimized polyamide composite with an embedded stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.
- ST coilovers are built by hand by the experts at KW in Fichtenberg, Germany. Each damper is tested on a shock dyno to verify it’s making the proper forces before being put into the ST box.
- Seamless Ride Height Adjustment – ST’s composite spring perch and unique trapezoidal thread pitch make ride height adjustability a breeze so you can dial in your preferred look.
- Linear race spring system provides a consistent response while driving and makes it easy to swap rates to further personalize your setup.
- Aluminum unibal top mounts improve steering response and feedback while allowing you to dial in your camber when applicable.
- ST XTA coilovers feature adjustable rebound damping which puts you in control of how comfortable or sporty your car feels.
- Galvanized steel housing for improved resistance to corrosion.
- 5 Year Limited Warranty – Unlimited Mileage
- Made in Germany
-
For all those who want to influence more than just their ride height. ST XA Coilovers deliver the look you need through a wide range of height adjustment. With an extensively adjustable damper setup, you can precisely adjust the driving behavior of your car to achieve enhanced road control without a compromise in comfort. ST XA Coilover kits deliver precise adjustment to your ride height and look of your car. We manufacture the adjustable spring perch made of durable and friction-optimized polyamide composite material with a stainless steel insert. Thanks to the composite material corrosion is prevented between the strut and perch ensuring long lasting height adjustability while the stainless steel insert provides strength and confidence! ST XA Coilovers come preset to our factory recommended damper settings, the same configuration we test them at on our KW shock dynos before they go into your box. The 16 distinct clicks of adjustable rebound damping allow you to refine the driving dynamics with a simple turn of the adjustment knob. Each kit includes a detailed damper setup manual making it easy to reset to our recommended setting at any time. Whether your preference is comfort, sportiness, or something in between; ST XA puts the finer details of the driving dynamics in your hands. Galvanized zinc coated steel struts optimize corrosion protection for long lasting use. We add a dust protection system to prevent unwanted dirt and particulate from coming in contact with the hardened chrome piston rod or getting into the valve packs. We reinforce the system with a multi-layered pressure resistant sealing package, mono block guide system and a low friction piston band which works inside the pressure resistant internal damper housing.
ST XA Coilovers deliver the look you need through a wide range of height & damping adjustment. Precisely adjust the driving behavior of your car to achieve enhanced road control without compromising comfort.
ST Coilover Kits enable you to individually adjust the ride height of your car to improve the appearance and driving behavior. Depending on your selection, ST coilover kits offer a wide range of adjustments giving you the tools needed to dial them into your requirements.
2005-2010 Volkswagen Jetta V, Sedan & Wagon 1.8-2.0(4cyl.)+2.5(5cyl.), 2.0TDI- Elastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.
- Composite spring perch made from wear-resistant, friction-optimized polyamide composite with an embedded stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.
- ST coilovers are built by hand by the experts at KW in Fichtenberg, Germany. Each damper is tested on a shock dyno to verify it’s making the proper forces before being put into the ST box.
- Seamless Ride Height Adjustment – ST’s composite spring perch and unique trapezoidal thread pitch make ride height adjustability a breeze so you can dial in your preferred look.
- Linear race spring system provides a consistent response while driving and makes it easy to swap rates to further personalize your setup.
- Aluminum unibal top mounts improve steering response and feedback while allowing you to dial in your camber when applicable.
- ST XTA coilovers feature adjustable rebound damping which puts you in control of how comfortable or sporty your car feels.
- Galvanized steel housing for improved resistance to corrosion.
- 5 Year Limited Warranty – Unlimited Mileage
- Made in Germany
-
Looking for maximum performance for your car? Our adjustable ST XTA Coilover kits are the upgrade you need. All ST XTA systems are delivered with a linear race springs system, adjustable dampers, and aluminum unibal camber adjustable top mounts. ST XTA Coilover kits deliver precise adjustment to your ride height so you control the look of your car. We manufacture the adjustable spring perch made of durable and friction-optimized polyamide composite material with a stainless steel insert. Thanks to the composite material corrosion is prevented between the strut and perch ensuring long lasting height adjustability while the stainless steel insert provides strength and confidence! ST XTA Coilovers come preset to our factory recommended damper settings, the same configuration we test them at on our KW shock dynos before they go into your box. The 16 distinct clicks of adjustable rebound damping allow you to refine the driving dynamics with a simple turn of the adjustment knob. Each kit includes a detailed damper setup manual making it easy to reset to our recommended setting at any time. Whether your preference is comfort, performance, or something in between; ST XTA puts the finer details of the driving dynamics in your hands. The top mounts included with our ST XTA Coilover kits allow you to adjust the camber at the front axle to dial in aggressive wheel and tire fitment. They also allow you to maximize the tire’s contact patch for driving in fast corners and any other driving scenario that demands maximum grip. Galvanized zinc coated steel struts optimize corrosion protection for long lasting use. We add a dust protection system to prevent unwanted dirt and particulate from coming in contact with the hardened chrome piston rod or getting into the valve packs. We reinforce the system with a multi-layered pressure resistant sealing package, mono block guide system and a low friction piston band which works inside the pressure resistant internal damper housing.
ST XTA Coilovers allow you to maximize the driving dynamics of your car if you are a sporty ambitious driver. With the linear race springs, adjustable dampers, and aluminum unibal top mounts, you can dail in the cars behavior easily.
ST Coilover Kits enable you to individually adjust the ride height of your car to improve the appearance and driving behavior. Depending on your selection, ST coilover kits offer a wide range of adjustments giving you the tools needed to dial them into your requirements.
2009-2014 Volkswagen Golf VI 2.5 (5cyl.)- Elastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.
- Composite spring perch made from wear-resistant, friction-optimized polyamide composite with an embedded stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.
- ST coilovers are built by hand by the experts at KW in Fichtenberg, Germany. Each damper is tested on a shock dyno to verify it’s making the proper forces before being put into the ST box.
- Seamless Ride Height Adjustment – ST’s composite spring perch and unique trapezoidal thread pitch make ride height adjustability a breeze so you can dial in your preferred look.
- Linear race spring system provides a consistent response while driving and makes it easy to swap rates to further personalize your setup.
- Aluminum unibal top mounts improve steering response and feedback while allowing you to dial in your camber when applicable.
- ST XTA coilovers feature adjustable rebound damping which puts you in control of how comfortable or sporty your car feels.
- Galvanized steel housing for improved resistance to corrosion.
- 5 Year Limited Warranty – Unlimited Mileage
- Made in Germany
-
Looking for maximum performance for your car? Our adjustable ST XTA Coilover kits are the upgrade you need. All ST XTA systems are delivered with a linear race springs system, adjustable dampers, and aluminum unibal camber adjustable top mounts. ST XTA Coilover kits deliver precise adjustment to your ride height so you control the look of your car. We manufacture the adjustable spring perch made of durable and friction-optimized polyamide composite material with a stainless steel insert. Thanks to the composite material corrosion is prevented between the strut and perch ensuring long lasting height adjustability while the stainless steel insert provides strength and confidence! ST XTA Coilovers come preset to our factory recommended damper settings, the same configuration we test them at on our KW shock dynos before they go into your box. The 16 distinct clicks of adjustable rebound damping allow you to refine the driving dynamics with a simple turn of the adjustment knob. Each kit includes a detailed damper setup manual making it easy to reset to our recommended setting at any time. Whether your preference is comfort, performance, or something in between; ST XTA puts the finer details of the driving dynamics in your hands. The top mounts included with our ST XTA Coilover kits allow you to adjust the camber at the front axle to dial in aggressive wheel and tire fitment. They also allow you to maximize the tire’s contact patch for driving in fast corners and any other driving scenario that demands maximum grip. Galvanized zinc coated steel struts optimize corrosion protection for long lasting use. We add a dust protection system to prevent unwanted dirt and particulate from coming in contact with the hardened chrome piston rod or getting into the valve packs. We reinforce the system with a multi-layered pressure resistant sealing package, mono block guide system and a low friction piston band which works inside the pressure resistant internal damper housing.
ST XTA Coilovers allow you to maximize the driving dynamics of your car if you are a sporty ambitious driver. With the linear race springs, adjustable dampers, and aluminum unibal top mounts, you can dail in the cars behavior easily.
ST Coilover Kits enable you to individually adjust the ride height of your car to improve the appearance and driving behavior. Depending on your selection, ST coilover kits offer a wide range of adjustments giving you the tools needed to dial them into your requirements.
2015-2020 Audi A3 (8V), 2WD 1.8T+2.0T(4cyl.) 50mm ?- Elastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.
- Composite spring perch made from wear-resistant, friction-optimized polyamide composite with an embedded stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.
- ST coilovers are built by hand by the experts at KW in Fichtenberg, Germany. Each damper is tested on a shock dyno to verify it’s making the proper forces before being put into the ST box.
- Seamless Ride Height Adjustment – ST’s composite spring perch and unique trapezoidal thread pitch make ride height adjustability a breeze so you can dial in your preferred look.
- Linear race spring system provides a consistent response while driving and makes it easy to swap rates to further personalize your setup.
- Aluminum unibal top mounts improve steering response and feedback while allowing you to dial in your camber when applicable.
- ST XTA coilovers feature adjustable rebound damping which puts you in control of how comfortable or sporty your car feels.
- Galvanized steel housing for improved resistance to corrosion.
- 5 Year Limited Warranty – Unlimited Mileage
- Made in Germany
-
Looking for maximum performance for your car? Our adjustable ST XTA Coilover kits are the upgrade you need. All ST XTA systems are delivered with a linear race springs system, adjustable dampers, and aluminum unibal camber adjustable top mounts. ST XTA Coilover kits deliver precise adjustment to your ride height so you control the look of your car. We manufacture the adjustable spring perch made of durable and friction-optimized polyamide composite material with a stainless steel insert. Thanks to the composite material corrosion is prevented between the strut and perch ensuring long lasting height adjustability while the stainless steel insert provides strength and confidence! ST XTA Coilovers come preset to our factory recommended damper settings, the same configuration we test them at on our KW shock dynos before they go into your box. The 16 distinct clicks of adjustable rebound damping allow you to refine the driving dynamics with a simple turn of the adjustment knob. Each kit includes a detailed damper setup manual making it easy to reset to our recommended setting at any time. Whether your preference is comfort, performance, or something in between; ST XTA puts the finer details of the driving dynamics in your hands. The top mounts included with our ST XTA Coilover kits allow you to adjust the camber at the front axle to dial in aggressive wheel and tire fitment. They also allow you to maximize the tire’s contact patch for driving in fast corners and any other driving scenario that demands maximum grip. Galvanized zinc coated steel struts optimize corrosion protection for long lasting use. We add a dust protection system to prevent unwanted dirt and particulate from coming in contact with the hardened chrome piston rod or getting into the valve packs. We reinforce the system with a multi-layered pressure resistant sealing package, mono block guide system and a low friction piston band which works inside the pressure resistant internal damper housing.
ST XTA Coilovers allow you to maximize the driving dynamics of your car if you are a sporty ambitious driver. With the linear race springs, adjustable dampers, and aluminum unibal top mounts, you can dail in the cars behavior easily.
ST Coilover Kits enable you to individually adjust the ride height of your car to improve the appearance and driving behavior. Depending on your selection, ST coilover kits offer a wide range of adjustments giving you the tools needed to dial them into your requirements.
2015-2020 Audi A3 (8V) Quattro 2.0T (4cyl.)- Elastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.
- Composite spring perch made from wear-resistant, friction-optimized polyamide composite with an embedded stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.
- ST coilovers are built by hand by the experts at KW in Fichtenberg, Germany. Each damper is tested on a shock dyno to verify it’s making the proper forces before being put into the ST box.
- Seamless Ride Height Adjustment – ST’s composite spring perch and unique trapezoidal thread pitch make ride height adjustability a breeze so you can dial in your preferred look.
- Linear race spring system provides a consistent response while driving and makes it easy to swap rates to further personalize your setup.
- Aluminum unibal top mounts improve steering response and feedback while allowing you to dial in your camber when applicable.
- ST XTA coilovers feature adjustable rebound damping which puts you in control of how comfortable or sporty your car feels.
- Galvanized steel housing for improved resistance to corrosion.
- 5 Year Limited Warranty – Unlimited Mileage
- Made in Germany
-
Looking for maximum performance for your car? Our adjustable ST XTA Coilover kits are the upgrade you need. All ST XTA systems are delivered with a linear race springs system, adjustable dampers, and aluminum unibal camber adjustable top mounts. ST XTA Coilover kits deliver precise adjustment to your ride height so you control the look of your car. We manufacture the adjustable spring perch made of durable and friction-optimized polyamide composite material with a stainless steel insert. Thanks to the composite material corrosion is prevented between the strut and perch ensuring long lasting height adjustability while the stainless steel insert provides strength and confidence! ST XTA Coilovers come preset to our factory recommended damper settings, the same configuration we test them at on our KW shock dynos before they go into your box. The 16 distinct clicks of adjustable rebound damping allow you to refine the driving dynamics with a simple turn of the adjustment knob. Each kit includes a detailed damper setup manual making it easy to reset to our recommended setting at any time. Whether your preference is comfort, performance, or something in between; ST XTA puts the finer details of the driving dynamics in your hands. The top mounts included with our ST XTA Coilover kits allow you to adjust the camber at the front axle to dial in aggressive wheel and tire fitment. They also allow you to maximize the tire’s contact patch for driving in fast corners and any other driving scenario that demands maximum grip. Galvanized zinc coated steel struts optimize corrosion protection for long lasting use. We add a dust protection system to prevent unwanted dirt and particulate from coming in contact with the hardened chrome piston rod or getting into the valve packs. We reinforce the system with a multi-layered pressure resistant sealing package, mono block guide system and a low friction piston band which works inside the pressure resistant internal damper housing.
ST XTA Coilovers allow you to maximize the driving dynamics of your car if you are a sporty ambitious driver. With the linear race springs, adjustable dampers, and aluminum unibal top mounts, you can dail in the cars behavior easily.
ST Coilover Kits enable you to individually adjust the ride height of your car to improve the appearance and driving behavior. Depending on your selection, ST coilover kits offer a wide range of adjustments giving you the tools needed to dial them into your requirements.
2015-2021 Volkswagen Golf VII 1.8T- Elastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.
- Composite spring perch made from wear-resistant, friction-optimized polyamide composite with an embedded stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.
- ST coilovers are built by hand by the experts at KW in Fichtenberg, Germany. Each damper is tested on a shock dyno to verify it’s making the proper forces before being put into the ST box.
- Seamless Ride Height Adjustment – ST’s composite spring perch and unique trapezoidal thread pitch make ride height adjustability a breeze so you can dial in your preferred look.
- Linear race spring system provides a consistent response while driving and makes it easy to swap rates to further personalize your setup.
- Aluminum unibal top mounts improve steering response and feedback while allowing you to dial in your camber when applicable.
- ST XTA coilovers feature adjustable rebound damping which puts you in control of how comfortable or sporty your car feels.
- Galvanized steel housing for improved resistance to corrosion.
- 5 Year Limited Warranty – Unlimited Mileage
- Made in Germany
Showing 18817–18828 of 20400 results