-
Add some horsepower to your 2015-2017 STI with the new Mishimoto Performance Air Intake. This kit is engineered specifically for your 2015-2017 Subaru STI and includes everything needed to replace the restrictive stock airbox. Our engineers spent months fine-tuning this design in an attempt to squeak out every last bit of performance. This dyno-proven air intake provides 20 whp/18 wtq gains over the stock intake while maintaining safe air/fuel ratios, perfect for some extra punch on the street or autocross course. The Mishimoto Subaru 2015-2017 STI Performance Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the stock tune. The mandrel-bent aluminum intake pipe is available with a red or black powder-coated finish or a polished aluminum finish. This pipe utilizes the Mishimoto air straightener and CNC-machined mass airflow sensor (MAF) housing to provide accurate and consistent MAF readings, which translates into a smooth power band. To reduce air intake temperatures (IATs), the air filter has been placed outside the hot engine bay, and a powder-coated heat shield prevents any heat-soak from occurring. The Mishimoto free-flowing air filter provides a 16% greater surface area, optimal airflow, and proper filtration of dirt and debris. The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Additionally, this kit includes a silicone coupler, clamps, and all other hardware necessary to complete a quick installation for easy bolt-on power. A rubber cap is provided to place over the sound symposer housing. Along with an upgrade in power, this intake also provides an aggressive and rich intake tone that is a huge improvement over the stock intake. The Mishimoto Subaru WRX/STI Performance Air Intake is designed in Delaware, USA and includes the Mishimoto Lifetime Warranty
Performance cold air intake kit engineered to increase airflow for improved horsepower and throttle response. Includes high-quality components for enhanced filtration, efficient airflow, and a precise fit.
2015 Subaru WRX STI Base 2.5 Liter TY856, 2015 Subaru WRX STI Launch Edition 2.5 Liter TY856, 2015 Subaru WRX STI Limited 2.5 Liter TY856- Mandrel-bent aluminum pipe offered in polished, wrinkle black, and wrinkle red
- Includes heat shield to protect air intake from hot engine heat
- Maximum gain: 20 whp and 18 wtq
-
The Mishimoto silicone Ancillary Hose Kit for the 2015+ Subaru WRX is designed to improve the reliability of your vehicle and eliminate weak points found with the factory rubber hoses. We have carefully selected 13 hoses, both PCV and coolant lines, which we found can easily be replaced and benefit from the use of silicone. Mishimoto silicone hoses are crafted from four layers of silicone with heat-resistant embedded fibers to provide improved pressure and heat tolerance. PCV lines are commonly exposed to fine particles of oil which, over time, degrade the rubber and lead to eventual failure. Mishimoto silicone hoses have substantially greater resilience to these particles, providing a hose that will endure the test of time. Each hose included in this kit is designed with factory specifications in mind, resulting in a direct-fit replacement that is easy to install. This kit is available in black, blue, and red and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
Complete radiator coolant hose kit designed to maintain proper coolant flow and system pressure. Includes durable, heat-resistant hoses for leak prevention, reliable performance, and a precise, easy installation.
2015 Subaru WRX 2.0 Liter TR690, 2015 Subaru WRX 2.0 Liter TY751- Improves tolerance to heat, pressure, and oil degradation compared to stock rubber components
- Constructed from four layers of silicone with heat-resistant embedded fibers
- Improves longevity and reliability
-
Looking for a way to improve spool-up, increase power potential, and improve engine bay aesthetics? Mishimoto has you covered with their new charge pipe designed specifically for the 2015-2021 Subaru WRX. Utilizing a one-piece construction with a cast aluminum pipe outlet, this charge pipe provides a smooth transition in size from the turbocharger compressor outlet to the intercooler end tank. Installation is simple, requires no modification to any parts in the engine bay, and can be completed in under 1 hour. The kit also includes a new charge pipe to intercooler hose, and new bypass valve hoses. These components negate the need to gather supplies for installation, and their high quality construction ensures years of reliable service. This innovative charge pipe is available in either polished or wrinkle black finish and includes the Mishimoto Lifetime Warranty
Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.
2015 Subaru WRX Base 2.0 Liter TY751, 2015 Subaru WRX Limited 2.0 Liter TR690, 2015 Subaru WRX Limited 2.0 Liter TY751, 2015 Subaru WRX Premium 2.0 Liter TR690, 2015 Subaru WRX Premium 2.0 Liter TY751- Maximum airflow results from the larger-diameter Mishimoto charge-pipe versus the smaller plastic stock pipe
- Compatible with the stock top-mount intercooler or Mishimoto top-mount intercooler
- Replaces the weak, plastic stock charge-pipe for maximum durability
-
Looking for a way to improve spool-up, increase power potential, and improve engine bay aesthetics? Mishimoto has you covered with their new charge pipe designed specifically for the 2015+ Subaru WRX. Utilizing a one-piece construction with a cast aluminum pipe outlet, this charge pipe provides a smooth transition in size from the turbocharger compressor outlet to the interooler end tank. Installation is simple, requires no modification to any parts in the engine bay, and can be completed in under 1 hour. The kit also includes a new charge pipe to intercooler hose, and new bypass valve hoses. These components negate the need to gather supplies for installation, and their high quality construction ensures years of reliable service. This innovative charge pipe is available in polished, wrinkle black, or wrinkle red finish and includes the Mishimoto Lifetime Warranty
Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.
2015 Subaru WRX Base 2.0 Liter TY751, 2015 Subaru WRX Limited 2.0 Liter TR690, 2015 Subaru WRX Limited 2.0 Liter TY751, 2015 Subaru WRX Premium 2.0 Liter TR690, 2015 Subaru WRX Premium 2.0 Liter TY751- Maximum airflow results from the larger-diameter Mishimoto charge-pipe versus the smaller plastic stock pipe
- Compatible with the stock top-mount intercooler or Mishimoto top-mount intercooler
- Replaces the weak, plastic stock charge-pipe for maximum durability
-
Looking for a way to improve spool-up, increase power potential, and improve engine bay aesthetics? Mishimoto has you covered with their new charge pipe designed specifically for the 2015+ Subaru WRX. Utilizing a one-piece construction with a cast aluminum pipe outlet, this charge pipe provides a smooth transition in size from the turbocharger compressor outlet to the interooler end tank. Installation is simple, requires no modification to any parts in the engine bay, and can be completed in under 1 hour. The kit also includes a new charge pipe to intercooler hose, and new bypass valve hoses. These components negate the need to gather supplies for installation, and their high quality construction ensures years of reliable service. This innovative charge pipe is available in polished, wrinkle black, or wrinkle red finish and includes the Mishimoto Lifetime Warranty
Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.
2015 Subaru WRX Base 2.0 Liter TY751, 2015 Subaru WRX Limited 2.0 Liter TR690, 2015 Subaru WRX Limited 2.0 Liter TY751, 2015 Subaru WRX Premium 2.0 Liter TR690, 2015 Subaru WRX Premium 2.0 Liter TY751- Maximum airflow results from the larger-diameter Mishimoto charge-pipe versus the smaller plastic stock pipe
- Compatible with the stock top-mount intercooler or Mishimoto top-mount intercooler
- Replaces the weak, plastic stock charge-pipe for maximum durability
-
High oil temperatures can wreak havoc on your high-performance FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. This kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. Mishimoto’s direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. This kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your WRX can achieve a +25 degree Fahrenheit (13.9 degree Celsius) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty.
High-performance engine oil cooler designed to regulate oil temperature and protect critical engine components. Efficient heat dissipation improves durability, maintains lubrication, and ensures reliable performance.
2015 Subaru WRX 2.0 Liter TR690, 2015 Subaru WRX 2.0 Liter TY751- Full bolt-on oil cooling solution for street and track vehicles
- Proven 20 F (11.1 C) drop in oil temperature
- No modification necessary for installation
-
The Mishimoto silicone Ancillary Hose Kit for the 2015+ Subaru WRX is designed to improve the reliability of your vehicle and eliminate weak points found with the factory rubber hoses. We have carefully selected 13 hoses, both PCV and coolant lines, which we found can easily be replaced and benefit from the use of silicone. Mishimoto silicone hoses are crafted from four layers of silicone with heat-resistant embedded fibers to provide improved pressure and heat tolerance. PCV lines are commonly exposed to fine particles of oil which, over time, degrade the rubber and lead to eventual failure. Mishimoto silicone hoses have substantially greater resilience to these particles, providing a hose that will endure the test of time. Each hose included in this kit is designed with factory specifications in mind, resulting in a direct-fit replacement that is easy to install. This kit is available in black, blue, and red and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
Complete radiator coolant hose kit designed to maintain proper coolant flow and system pressure. Includes durable, heat-resistant hoses for leak prevention, reliable performance, and a precise, easy installation.
2015 Subaru WRX 2.0 Liter TR690, 2015 Subaru WRX 2.0 Liter TY751- Improves tolerance to heat, pressure, and oil degradation compared to stock rubber components
- Constructed from four layers of silicone with heat-resistant embedded fibers
- Improves longevity and reliability
-
High oil temperatures can wreak havoc on your high-performance FA20 DIT. Protect your investment with the Mishimoto direct-fit thermostatic oil cooler kit designed specifically for the 2015+ Subaru WRX. The WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. This kit is designed to replace the stock liquid-to-liquid with a Mishimoto’sandwich Plate with Rear-Mounted Thermostat, which includes a built-in thermostat with a 185 Degrees Fahrenheit / 85 Degrees Celsius activation temperature. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. Mishimoto’s direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific silicone liquid-to-liquid heat exchanger bypass hose provides a clean look in the engine bay. This kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your WRX can achieve a XX Degrees Fahrenheit (XX.X Degrees Celsius) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Thermostatic Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty.
High-performance engine oil cooler designed to regulate oil temperature and protect critical engine components. Efficient heat dissipation improves durability, maintains lubrication, and ensures reliable performance.
2015 Subaru WRX Base 2.0 Liter TY751, 2015 Subaru WRX Limited 2.0 Liter TR690, 2015 Subaru WRX Limited 2.0 Liter TY751, 2015 Subaru WRX Premium 2.0 Liter TR690, 2015 Subaru WRX Premium 2.0 Liter TY751- Full bolt-on oil cooling solution for street and track vehicles
- Proven 20 F (11.1 C) drop in oil temperature
- No modification necessary for installation
-
High oil temperatures can wreak havoc on your high-performance FA20 DIT. Protect your investment with the Mishimoto direct-fit thermostatic oil cooler kit designed specifically for the 2015+ Subaru WRX. The WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. This kit is designed to replace the stock liquid-to-liquid with a Mishimoto’sandwich Plate with Rear-Mounted Thermostat, which includes a built-in thermostat with a 185 Degrees Fahrenheit / 85 Degrees Celsius activation temperature. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. Mishimoto’s direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific silicone liquid-to-liquid heat exchanger bypass hose provides a clean look in the engine bay. This kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your WRX can achieve a XX Degrees Fahrenheit (XX.X Degrees Celsius) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Thermostatic Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty.
High-performance engine oil cooler designed to regulate oil temperature and protect critical engine components. Efficient heat dissipation improves durability, maintains lubrication, and ensures reliable performance.
2015 Subaru WRX Base 2.0 Liter TY751, 2015 Subaru WRX Limited 2.0 Liter TR690, 2015 Subaru WRX Limited 2.0 Liter TY751, 2015 Subaru WRX Premium 2.0 Liter TR690, 2015 Subaru WRX Premium 2.0 Liter TY751- Full bolt-on oil cooling solution for street and track vehicles
- Proven 20 F (11.1 C) drop in oil temperature
- No modification necessary for installation
-
Already installed the Mishimoto charge pipe kit onto your WRX? Now you need to go all the way to ensure that your WRX is seeing maximum charge temp drops! The stock top-mount intercooler is prone to head soak during repeated wide open throttle pulls and during track use. Mishimoto engineers spent months designing and testing this new intercooler to ensure optimum performance on both the street and track. This intercooler utilizes durable cast aluminum end tanks TIG-welded to a highly efficient, dense bar-and-plate core. The Mishimoto intercooler has a 4″ thick core and a total volume of 625 in3, making it one of the largest topmount intercoolers you can buy. Thanks to this volume and a very dense offset fin pitch, we are able to optimize heat transfer and support vehicles from stock up to 500 whp. This intercooler endured rigorous testing, showing a 35 F temperature drop as well as a +15 whp and +8 wtq bolt-on power increase for our test vehicle equipped with a Mishimoto downpipe and stage 2 EcuTek tune. Installation is simple, requires no modification to any parts in the engine bay, and can be completed in under 1 hour. This intercooler bolts right up to the Mishimoto or some other aftermarket charge pipes with the supplied hot side silicone coupler. The awesome, 4 piece Mishimoto air splitter is included with this intercooler as well, this will help divert the maximum amount of air into your intercooler. The kit also includes a silicone intercooler to throttle-body hose for maximum durability under high boost. These components negate the need to gather supplies for installation, and they ensure years of reliable service. This intercooler is available in a durable powder-coated finish of Stealth Black or Sleek Silver, and is backed by the Mishimoto Lifetime Warranty.
Mishimoto Subaru WRX Topmount Intercooler MMTMIC-WRX-15BK
2015-2017 Subaru WRX 2.0 Liter, 2015 Subaru WRX Base 2.0 Liter, 2015 Subaru WRX Base 2.0 Liter TY751, 2015 Subaru WRX Limited 2.0 Liter, 2015 Subaru WRX Limited 2.0 Liter, 2015 Subaru WRX Limited 2.0 Liter TR690, 2015 Subaru WRX Limited 2.0 Liter TY751, 2015 Subaru WRX Premium 2.0 Liter, 2015 Subaru WRX Premium 2.0 Liter, 2015 Subaru WRX Premium 2.0 Liter TR690, 2015 Subaru WRX Premium 2.0 Liter TY751- TIG-welded to a highly efficient bar-and-plate core
-
Looking for a way to reduce high intake temperatures on your stock or modified WRX? The solution is the Mishimoto Top-Mount Intercooler and Charge Pipe System engineered specifically for the 2015+ Subaru WRX. The stock top-mount intercooler is prone to heat soak during repeated wide open throttle pulls and during track use. Mishimoto engineers spent months designing and testing this new intercooler to ensure optimum performance on both the street and track. This intercooler utilizes durable cast aluminum end tanks TIG-welded to a highly efficient, dense bar-and-plate core. The Mishimoto Top-Mount Intercooler has a 4″ thick core and a total volume of 625 in3, making it one of the largest topmount intercoolers you can buy. Thanks to this volume and a very dense offset fin pitch, we are able to optimize heat transfer and support vehicles from stock up to 500 whp. The Mishimoto Top-Mount Intercooler endured rigorous testing, showing a 35 F temperature drop as well as a +15 whp and +8 wtq bolt-on power increase for our test vehicle equipped with a Mishimoto downpipe and Stage 2 EcuTek tune. Installation is simple, requires no modification to any parts in the engine bay, and can be completed in under 1 hour. Included with this intercooler is Mishimoto’s innovative charge pipe, utilizing a one-piece construction without the need for several couplers and clamps. An innovative, air splitter is included with the intercooler, this will help divert the maximum amount of air into your Mishimoto intercooler. The kit also includes a new charge pipe to intercooler hose, an intercooler to throttle-body hose, new bypass valve hoses, and a hot side O-ring gasket. These components negate the need to gather supplies for installation, and they ensure years of reliable service. This intercooler is available in a durable powder-coated finish of Stealth Black or Sleek Silver, with your choice of either a polished or wrinkle black charge pipe, and it includes the Mishimoto Lifetime Warranty
Complete intercooler kit engineered to reduce intake air temperatures for increased power and efficiency. Includes high-quality components for optimal airflow, improved throttle response, and a precise, easy installation.
2015 Subaru WRX Base 2.0 Liter TY751, 2015 Subaru WRX Limited 2.0 Liter TR690, 2015 Subaru WRX Limited 2.0 Liter TY751, 2015 Subaru WRX Premium 2.0 Liter TR690, 2015 Subaru WRX Premium 2.0 Liter TY751- 100-percent aluminum construction with durable cast end tanks TIG-welded to a highly efficient bar-and-plate core
- Provides 35 F temperature drop compared to stock intercooler on a stage 2 tune
- Proven 15 whp and 8 wtq bolt-on power increase on a stage 2 tune
-
Give your 2015-2020 BMW M3/M4 the protection it deserves with the Mishimoto Direct Fit Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first that the compact M’s saw turbos from the factory, but these engines brought along another long-standing tradition – Blow-by.The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports in order to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation.The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit billet aluminum mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Two aluminum, 3/4in barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty!Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what We’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.
Engine oil catch can kit designed to capture oil vapors and prevent buildup in the intake system. Helps maintain efficiency, reduce carbon deposits, and improve performance with durable components and easy installation.- Single 2-Port Compact Baffled Oil Catch Can separates oil particles using 50-micron bronze filter
- Direct-fit hoses allow for installation with no modification to engine cover
- Application-specific bracket mounts the can in a serviceable location
Showing 18709–18720 of 22942 results