0
0
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
0 Shopping Cart 0.00 $

aFe BladeRunner 15-20 VW GTI (MKVII) L4-2.0L (t) Aluminum Hot and Cold Charge Pipe Kit Black

Smooth transitions in the mandrel-bent aluminum tubing decrease turbulence and minimize pressure loss, increasing horsepower and torque. The BladeRunner I/C tube kit provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power. This tube kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings for superior strength and durability. Finished in Wrinkle Black powder coating with a unique laser-etched aFe Power logo for a custom look.
BladeRunner 3 IN Aluminum Hot and Cold Charge Pipe Kit Black Volkswagen GTI (MKVII) 15-21 L4-2.0L (t)

  • Directly replace your VW’s restrictive plastic intercooler tubes with aFe’s BladeRunner free-flowing, heat-resistant aluminum tubes.
  • Features Premium Stainless-Steel Spring-Loaded T-Bolt Clamps And 5-Ply Silicone Couplings
  • 1/8″ NPT Ports Provided for Connecting Sensors or Water Methanol Injection
  • TIG-Welded 2-1/2″ Hot Side and 2-3/4″ Cold Side Aluminum Tubes
  • Powder Coated Wrinkle Black for Heat and Corrosion Resistance
  • Dyno-Proven Gains of +15 HP and +19 Lbs. x Ft. TQ
  • Outflows Factory Tubes by 25%
  • No modifications needed

545.00 $

SKU 46-20414-B
brand aFe
Add to wishlist Add to compare

Description

Smooth transitions in the mandrel-bent aluminum tubing decrease turbulence and minimize pressure loss, increasing horsepower and torque. The BladeRunner I/C tube kit provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power. This tube kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings for superior strength and durability. Finished in Wrinkle Black powder coating with a unique laser-etched aFe Power logo for a custom look.
BladeRunner 3 IN Aluminum Hot and Cold Charge Pipe Kit Black Volkswagen GTI (MKVII) 15-21 L4-2.0L (t)

  • Directly replace your VW’s restrictive plastic intercooler tubes with aFe’s BladeRunner free-flowing, heat-resistant aluminum tubes.
  • Features Premium Stainless-Steel Spring-Loaded T-Bolt Clamps And 5-Ply Silicone Couplings
  • 1/8″ NPT Ports Provided for Connecting Sensors or Water Methanol Injection
  • TIG-Welded 2-1/2″ Hot Side and 2-3/4″ Cold Side Aluminum Tubes
  • Powder Coated Wrinkle Black for Heat and Corrosion Resistance
  • Dyno-Proven Gains of +15 HP and +19 Lbs. x Ft. TQ
  • Outflows Factory Tubes by 25%
  • No modifications needed

Specification

Weight 10.7 kg
Dimensions 23.8 × 16 × 12.9 cm
air_freight_prohibited

false
not_carb_approved

true
carb_acknowledgement_required

true
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
regular_stock

false
units_per_sku

1
upc

802959467626
brand

aFe
part_number

46-20414-B

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 8109

    CSF 12-16 BMW M5 (F10) / 12-18 BMW M6 (F06/F12/F13) Twin Charge-Air-Cooler Set – Crinkle Black

    No Reviews

    The S63 4.4L Twin Turbo V8 in the BMW F1X M5/M6 is an absolute monster that responds incredibly well to bolt-on upgrades, larger turbos, and performance tuning. Tuners quickly found that increasing power on the S63 pushed charge air temperatures past the OEM Charge-Air-Coolers’ limits resulting in dangerously high Intake Air Temperatures (IATs). Pure turbos approached CSF to develop a Charge-Air-Cooler upgrade that would hold up to the extreme boost levels their turbos upgrades could generate and keep the car’s IATs in check. The result was the World’s 1st Cast End Tank Designed High-Performance Charge-Air-Cooler Set for the F1X M5/M6. CSF used CFD analysis and testing to create the largest charge-air-cooler that could fit in the factory location. The Top/Bottom, Cross-Flow, Dual-Pass Cores are 28% larger than the factory coolers and offer significant reductions in IATs at increased boost levels.
    The CSF Charge-Air-Coolers boast a 28% larger core size than factory per side. This greatly increases the capacity for heat transfer from the hot charge air from your F1X’s Turbos.
    The CSF #8109 Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.

    • Finished with a Professional “Crinkle Black” Powder-Coated Finish (CSF #8109), Also Available in Raw Aluminum Finish with Option for Custom Powder-Coating Available (Inquire for More Details on Lead Time and Pricing)
    • “Drop-In Fit” Design for an Easy & Quick Plug-and-Play Installation ­- Complete with OEM-Style “Quick Connect” Water Connections and Sensor Ports
    • Top/Bottom, Cross-Flow, Dual-Pass Core Configuration with 2-Stage Water Cooling for Maximum Efficiency and Intake Temperature Reduction
    • Custom Designed CSF Liquid-To-Air Intercooler Core (CFD Analysis and Testing Completed to Ensure Optimal Performance)
    • Designed with 3D Scanning/Rapid Prototype Technology to Ensure Precise Fitment and Maximum Surface Area Utilization
    • World’s 1st Cast End Tank Designed High-Performance Charge-Air-Cooler Set for the BMW F1X M5/M6
    • 28% Increase in Core Size Per Each Charge Cooler Compared to the OEM Charge Air Coolers
    • Additional E85/Methanol Injection Ports Built into the Cast End Tank Design
    • Lifetime Warranty
    1,699.00 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 46-20232-B

    aFe BladeRunner GT Series Intercooler w/ Tube 12-15 BMW 335i F30 3.0L (t)

    No Reviews

    End Tanks: The unique BladeRunner end tanks are constructed out of 3/16″ thick aluminum plates and include two 1/8″ NPT ports for sensors or water-methanol injection. 5″ Bar and Plate Core Design: The use of the bar and plate core design allows for greater airflow and increased heat dissipation over the much smaller tube and fin design used by the factory. TIG-Welded: 100% TIG-Welded inside and out by a certified craftsmen for strength and durability. TIG-Welding provides the strongest welds while reducing stress cracks. Pressure Tested: The BladeRunner Intercooler is test pressure rated at 200psi. Mandrel-bent Tubing: Constructed of 2-1/2″ to 3″ mandrel-bent aluminum tubing and powder-coated wrinkle-black for heat and corrosion resistance. The smooth transition mandrel bends decrease turbulence which increases horsepower and torque. The high-temp wrinkle-black powder-coating insulates the tubes from engine heat and protects them from corrosion. aFe Badging: Unique aluminum laser-cut aFe Power logo plate is welded-on for an aggressive style. Perfect Fit: Includes stainless steel clamps for a leak-free seal and heavy-duty 5-Ply reinforced silicone coupling for strength.
    BladeRunner GT Series Intercooler Kit w/ Tubes Black BMW 335i (F30) 12-15/ M235i (F22/23) 14-16 L6-3.0L (t) N55 A/T

    • Retains Factory Style Throttle Body And Intercooler Quick Connect
    • Incorporates Factory Style Quick Conn. For Intercooler Tubes
    • 100% TIG-Welded For Strength And Durability
    • 5 Ply Silicone Coupling For Strength
    • Outflows Factory Intercooler by 21%
    • Powdercoat For Heat Resistance
    • Lowers Intake Air Temperature
    • No Cutting Or Drilling Needed
    2,036.00 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: MMINT-F30-12SL

    Mishimoto 2012-2016 BMW F22/F30 Intercooler (I/C ONLY) – Silver

    No Reviews

    Make your Ultimate Driving Machine even more ultimate with the addition of the Mishimoto BMW 2012-2016 F22/F30 Chassis Performance Intercooler! From the factory, the N20/26 and N55 engines are a prowess of German engineering, but the stock intercooler unit poses as a weak link for your turbocharged Bimmer. The tube-and-fin design coupled with plastic end tanks makes for the perfect environment for heat to set up residence and throttle the power of your 2, 3, or 4-series, especially for those running a tune. Mishimoto is here to unlock the full potential of your N20/26 and N55 engines with our Performance Intercooler specifically designed for the F22/F30 chassis. Our unique 6? thick step-core design, adds a 115? angle to the top section to allow for additional charged air cooling without fully obstructing other heat exchangers. Tubes and fins are a thing of the past with this design as we engineered our intercooler with a bar-and-plate construction optimizing this intercooler for heat dissipation with minimal pressure drop. Coupled together, our features were able to drop intercooler outlet temperatures by 45?F, and add 10 whp and 8 wtq all on the stock tune of our 2017 M2 test vehicle. The BMW F22/F30 Performance Intercooler is available in Silver or Black and also includes the Mishimoto Lifetime Warranty.
    High-efficiency intercooler engineered to reduce intake air temperatures for improved power and engine performance. Durable construction ensures optimal heat exchange, consistent boost, and a precise, reliable fit.

    • 6-in thick, angled step-core design optimized for maximum flow without fully obstructing other heat exchangers
    • Max power gains of 10 whp and 8 wtq on stock tuning
    • Patent Pending
    629.95 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 46-20237-B

    aFe BladeRunner 3in Intercooler Tube Cold Side 12-15 BMW 335i (F30) L6 3.0L (t) N55 (M/T)

    No Reviews

    Perfect Fit: Includes stainless steel clamps for a leak-free seal and heavy-duty 5-Ply polyester reinforced silicone hump coupling for strength. Mandrel-bent Tubing: Constructed of 2-1/2″ to 3″ mandrel-bent aluminum tubing then powder-coated wrinkle-black for heat and corrosion resistance. The smooth transition mandre l bends decrease turbulence which increases horsepower and torque. The high-temp wrinkle-black powder-coating insulates the tubes from engine heat and protects them from corrosion. Two 1/8″ NPT ports are provided for sensors or water-methanol injection. aFe Badging: Unique aluminum laser-cut aFe Power logo plate is welded-on for an aggressive style.
    BladeRunner 3 IN Aluminum Cold Charge Pipe Black BMW 335i (F30) 12-15/ M235i (F22/23) 14-16 L6-3.0L (t) N55 M/T

    • Retains Factory Style Throttle Body And Intercooler Quick Connect
    • Includes Premium Stainless Steel Clamps For Secure Fit
    • 5-Ply Silicone Coupling For Strength
    • Outflows Factory Charge Pipe By 18%
    • Powdercoat For Heat Resistance
    • Hassle Free Installation
    556.00 $
    Read more
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 0 Cart Garage
support@ucperformance.com