Crossmembers

Reduce weight, increase frontend rigidity, and add clearance for large-tube headers and turbo kits with a Tubular K-members from BMR Suspension. BMR Tubular K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-1/2-inch x 0.120 wall DOM steel tubing and 3/16-inch laser cut, CNC-formed steel plate, BMRs K-members give you a lightweight, extremely strong K-member. Every BMR K-member is 100-percent bolt-in and requires no modifications for fitment. The K-members are built with provision for either factory or manual steering racks.Designed for street performance, drag race, and road race applications, BMR Suspensions Tubular K-members drop weight and add loads of structural rigidity. The unique K-member design feature integrated engine mounts that weigh significantly less than factory engine mounts. This additional weight reduction allows BMR to use larger diameter tubing and thicker mounting plates for additional strength over other companies K-members. When combined with BMRs lower A-arms, a minimum weight reduction of over 30 pounds is common. With other lightweight frontend parts, weight reduction of up to 100 pounds is easily achievable.BMR Suspensions KM006 Tubular K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 4-5 hours. Proudly made in the U.S.A.!NOTE: Not compatible with OE lower control arms.
Reduce weight, increase front end rigidity, and add clearance for large-tube headers and turbo kits with a KM006 Tubular K-members from BMR Suspension
Designed to fit 1982-1992 GM F-body;Lighter than other competitors K-members due to integrated motor mount design;Built from heavy-duty 1-1/2-inch x 0.120 wall DOM steel tubing and 3/16-inch laser cut, CNC-formed steel plate;Not compatible with stock A-arms;Designed with no engine mounts;Designed with mounts for the factory steering rack;Designed for street performance, drag race, and handling applications;Durable powdercoat finish;4-5 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

Reduce weight, increase frontend rigidity, and add clearance for large-tube headers and turbo kits with a Tubular K-members from BMR Suspension. BMR Tubular K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-1/2-inch x 0.120 wall DOM steel tubing and 3/16-inch laser cut, CNC-formed steel plate, BMRs K-members give you a lightweight, extremely strong K-member. Every BMR K-member is 100-percent bolt-in and requires no modifications for fitment. The K-members are built with provision for either factory or manual steering racks.Designed for street performance, drag race, and road race applications, BMR Suspensions Tubular K-members drop weight and add loads of structural rigidity. The unique K-member design feature integrated engine mounts that weigh significantly less than factory engine mounts. This additional weight reduction allows BMR to use larger diameter tubing and thicker mounting plates for additional strength over other companies K-members. When combined with BMRs lower A-arms, a minimum weight reduction of over 30 pounds is common. With other lightweight frontend parts, weight reduction of up to 100 pounds is easily achievable.BMR Suspensions KM006 Tubular K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 4-5 hours. Proudly made in the U.S.A.!NOTE: Not compatible with OE lower control arms.
Reduce weight, increase front end rigidity, and add clearance for large-tube headers and turbo kits with a KM006 Tubular K-members from BMR Suspension
Designed to fit 1982-1992 GM F-body;Lighter than other competitors K-members due to integrated motor mount design;Built from heavy-duty 1-1/2-inch x 0.120 wall DOM steel tubing and 3/16-inch laser cut, CNC-formed steel plate;Not compatible with stock A-arms;Designed with no engine mounts;Designed with mounts for the factory steering rack;Designed for street performance, drag race, and handling applications;Durable powdercoat finish;4-5 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

Reduce weight and increase frontend rigidity in your 3rd gen F-body with a K-member from BMR Suspension. BMR K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-members. Manufactured from 1-1/2-inch x 0.120 wall DOM steel tubing and 3/16-inch laser cut, CNC-formed steel plate, BMR Suspension gives you a lightweight, extremely strong K-member. Every BMR K-member is 100-percent bolt-in and requires no modifications for fitment. The KM007 K-member is designed to be used with the factory steering links.Designed for street performance, drag race, and road race applications, BMR K-members drop weight and add loads of structural rigidity. BMRs unique K-member design features integrated engine mount that replace the heavy factory engine mounts. This additional weight reduction allows BMR to use larger diameter tubing and thicker mounting plates for additional strength over other available K-members. When combined with BMRs upper and lower A-arms, a weight reduction of 42 pounds is common. With other lightweight frontend parts, weight reduction of up to 100 pounds is easily achievable. This K-member works with your stock engine or you can easily swap to a traditional SBC or BBC engine with no fabrication.BMR Suspensions KM007 K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 4-5 hours. Proudly made in the U.S.A.!NOTE: Not compatible with OE A-arms.
Reduce weight, increase front end rigidity, and add clearance for large-tube headers and turbo kits with a KM007 Tubular K-members from BMR Suspension
Designed to fit 1982-1992 GM F-body;Lighter than other competitors K-members due to integrated motor mount design;Built from heavy-duty 1-1/2-inch x 0.120 wall DOM steel tubing and 3/16-inch laser cut, CNC-formed steel plate;Not compatible with stock A-arms;Designed with engine mounts for SBC/BBC;Designed with mounts for the factory steering rack;Designed for street performance, drag race, and handling applications;Durable powdercoat finish;4-5 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

Reduce weight and increase frontend rigidity in your 3rd gen F-body with a K-member from BMR Suspension. BMR K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-members. Manufactured from 1-1/2-inch x 0.120 wall DOM steel tubing and 3/16-inch laser cut, CNC-formed steel plate, BMR Suspension gives you a lightweight, extremely strong K-member. Every BMR K-member is 100-percent bolt-in and requires no modifications for fitment. The KM007 K-member is designed to be used with the factory steering links.Designed for street performance, drag race, and road race applications, BMR K-members drop weight and add loads of structural rigidity. BMRs unique K-member design features integrated engine mount that replace the heavy factory engine mounts. This additional weight reduction allows BMR to use larger diameter tubing and thicker mounting plates for additional strength over other available K-members. When combined with BMRs upper and lower A-arms, a weight reduction of 42 pounds is common. With other lightweight frontend parts, weight reduction of up to 100 pounds is easily achievable. This K-member works with your stock engine or you can easily swap to a traditional SBC or BBC engine with no fabrication.BMR Suspensions KM007 K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 4-5 hours. Proudly made in the U.S.A.!NOTE: Not compatible with OE A-arms.
Reduce weight, increase front end rigidity, and add clearance for large-tube headers and turbo kits with a KM007 Tubular K-members from BMR Suspension
Designed to fit 1982-1992 GM F-body;Lighter than other competitors K-members due to integrated motor mount design;Built from heavy-duty 1-1/2-inch x 0.120 wall DOM steel tubing and 3/16-inch laser cut, CNC-formed steel plate;Not compatible with stock A-arms;Designed with engine mounts for SBC/BBC;Designed with mounts for the factory steering rack;Designed for street performance, drag race, and handling applications;Durable powdercoat finish;4-5 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

Reduce weight and increase frontend rigidity in your 3rd gen F-body with a K-member from BMR Suspension. BMR K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-1/2-inch x 0.120 wall DOM steel tubing and 3/16-inch laser cut, CNC-formed steel plate, BMR Suspension gives you a lightweight, extremely strong K-member. Every BMR K-member is 100-percent bolt-in and requires no modifications for fitment. The KM007-1 K-member is designed to be used with a manual steering rack.Designed for street performance, drag race, and road race applications, BMR K-members drop weight and add loads of structural rigidity. BMRs unique K-member design features integrated engine mount that replace the heavy factory engine mounts. This additional weight reduction allows BMR to use larger diameter tubing and thicker mounting plates for additional strength over other available K-members. When combined with BMRs upper and lower A-arms, a weight reduction of 42 pounds is common. With other lightweight frontend parts, weight reduction of up to 100 pounds is easily achievable. This K-member works with your stock engine or you can easily swap to a traditional SBC or BBC engine with no fabrication.BMR Suspensions KM007-1 K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 4-5 hours. Proudly made in the U.S.A.!NOTE: Not compatible with OE A-arms.
Reduce weight, increase front end rigidity, and add clearance for large-tube headers and turbo kits with a KM007-1 Tubular K-members from BMR Suspension
Designed to fit 1982-1992 GM F-body;Lighter than other competitors K-members due to integrated motor mount design;Built from heavy-duty 1-1/2-inch x 0.120 wall DOM steel tubing and 3/16-inch laser cut, CNC-formed steel plate;Not compatible with stock A-arms;Designed with SBC/BBC engine mounts;Designed with mounts for Pinto steering rack;Designed for street performance, drag race, and handling applications;Durable powdercoat finish;4-5 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

Reduce weight and increase frontend rigidity in your 3rd gen F-body with a K-member from BMR Suspension. BMR K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-1/2-inch x 0.120 wall DOM steel tubing and 3/16-inch laser cut, CNC-formed steel plate, BMR Suspension gives you a lightweight, extremely strong K-member. Every BMR K-member is 100-percent bolt-in and requires no modifications for fitment. The KM007-1 K-member is designed to be used with a manual steering rack.Designed for street performance, drag race, and road race applications, BMR K-members drop weight and add loads of structural rigidity. BMRs unique K-member design features integrated engine mount that replace the heavy factory engine mounts. This additional weight reduction allows BMR to use larger diameter tubing and thicker mounting plates for additional strength over other available K-members. When combined with BMRs upper and lower A-arms, a weight reduction of 42 pounds is common. With other lightweight frontend parts, weight reduction of up to 100 pounds is easily achievable. This K-member works with your stock engine or you can easily swap to a traditional SBC or BBC engine with no fabrication.BMR Suspensions KM007-1 K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 4-5 hours. Proudly made in the U.S.A.!NOTE: Not compatible with OE A-arms.
Reduce weight, increase front end rigidity, and add clearance for large-tube headers and turbo kits with a KM007-1 Tubular K-members from BMR Suspension
Designed to fit 1982-1992 GM F-body;Lighter than other competitors K-members due to integrated motor mount design;Built from heavy-duty 1-1/2-inch x 0.120 wall DOM steel tubing and 3/16-inch laser cut, CNC-formed steel plate;Not compatible with stock A-arms;Designed with SBC/BBC engine mounts;Designed with mounts for Pinto steering rack;Designed for street performance, drag race, and handling applications;Durable powdercoat finish;4-5 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

Reduce weight, increase frontend rigidity, and add clearance for large-tube headers and turbo kits with a Tubular K-members from BMR Suspension. BMR Tubular K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-5/8-inch x 0.120 wall and 1-1/4-inch x 0.095 wall DOM tubing, BMRs K-members give you a lightweight, extremely strong K-member. Every BMR K-member is 100-percent bolt-in and requires no modifications for fitment. The K-members are built with provision for either factory or manual steering racks.Designed for street performance, drag race, and road race applications, BMR Suspensions Tubular K-members drop weight and add loads of structural rigidity. The unique K-member design feature integrated frame stands that replace the factory cast iron frame stands. This additional weight reduction allows BMR to use larger diameter tubing and thicker mounting plates for additional strength over other companies K-members. When combined with BMRs upper and lower A-arms, a minimum weight reduction of 42 pounds is common. With other lightweight frontend parts, weight reduction of up to 100 pounds is easily achievable.BMR Suspensions KM349 Tubular K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 4-5 hours. Proudly made in the U.S.A.!
Reduce weight, increase front end rigidity, and add clearance for large-tube headers and turbo kits with a KM349 Tubular K-members from BMR Suspension
Designed to fit 1998-2002 LS1 GM F-body;Designed with extra room for low mounted turbo applications;Lighter than other competitors K-members due to integrated motor mount design;Built from heavy-duty 1-5/8-inch x 0.120 wall and 1-1/4-inch x 0.095 wall DOM tubing;Additional ?-inch of A-arm adjustability provides up to 4 degrees of additional camber adjustment;Works with stock A-arms or any aftermarket A-arms;Designed with LS1 engine mounts;Designed to use a pinto manual rack;Designed for street performance, drag race, and handling applications;Durable powdercoat finish;4-5 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

Reduce weight, increase frontend rigidity, and add clearance for large-tube headers and turbo kits with a Tubular K-members from BMR Suspension. BMR Tubular K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-5/8-inch x 0.120 wall and 1-1/4-inch x 0.095 wall DOM tubing, BMRs K-members give you a lightweight, extremely strong K-member. Every BMR K-member is 100-percent bolt-in and requires no modifications for fitment. The K-members are built with provision for either factory or manual steering racks.Designed for street performance, drag race, and road race applications, BMR Suspensions Tubular K-members drop weight and add loads of structural rigidity. The unique K-member design feature integrated frame stands that replace the factory cast iron frame stands. This additional weight reduction allows BMR to use larger diameter tubing and thicker mounting plates for additional strength over other companies K-members. When combined with BMRs upper and lower A-arms, a minimum weight reduction of 42 pounds is common. With other lightweight frontend parts, weight reduction of up to 100 pounds is easily achievable.BMR Suspensions KM349 Tubular K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 4-5 hours. Proudly made in the U.S.A.!
Reduce weight, increase front end rigidity, and add clearance for large-tube headers and turbo kits with a KM349 Tubular K-members from BMR Suspension
Designed to fit 1998-2002 LS1 GM F-body;Designed with extra room for low mounted turbo applications;Lighter than other competitors K-members due to integrated motor mount design;Built from heavy-duty 1-5/8-inch x 0.120 wall and 1-1/4-inch x 0.095 wall DOM tubing;Additional ?-inch of A-arm adjustability provides up to 4 degrees of additional camber adjustment;Works with stock A-arms or any aftermarket A-arms;Designed with LS1 engine mounts;Designed to use a pinto manual rack;Designed for street performance, drag race, and handling applications;Durable powdercoat finish;4-5 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

Reduce weight, increase frontend rigidity, and add clearance for large-tube headers and turbo kits with a Tubular K-members from BMR Suspension. BMR Tubular K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-5/8-inch x 0.120 wall and 1-1/4-inch x 0.095 wall DOM tubing, BMRs K-members give you a lightweight, extremely strong K-member. Every BMR K-member is 100-percent bolt-in and requires no modifications for fitment. The K-members are built with provision for either factory or manual steering racks.Designed for street performance, drag race, and road race applications, BMR Tubular K-members drop weight and add loads of structural rigidity. BMRs unique K-member design feature integrated frame stands that replace the factory cast iron frame stands. This additional weight reduction allows us to use larger diameter tubing and thicker mounting plates for additional strength over other companies K-members. When combined with BMRs upper and lower A-arms, a minimum weight reduction of 42 pounds is common. With other lightweight frontend parts, weight reduction of up to 100 pounds is easily achievable.BMR Suspensions KM344 Tubular K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 4-5 hours. Proudly made in the U.S.A.!
Reduce weight, increase front end rigidity, and add clearance for large-tube headers and turbo kits with a KM344 Tubular K-members from BMR Suspension
Designed to fit 1998-2002 LS1 GM F-body;Designed with extra room for low mounted turbo applications;Lighter than other competitors K-members due to integrated motor mount design;Built from heavy-duty 1-5/8-inch x 0.120 wall and 1-1/4-inch x 0.095 wall DOM tubing;Additional ?-inch of A-arm adjustability provides up to 4 degrees of additional camber adjustment;Works with stock A-arms or any aftermarket A-arms;Designed with LS1 engine mounts;Designed for stock steering rack;Designed for street performance, drag race, and handling applications;Durable powdercoat finish;4-5 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.