Control Arms

The upper arms also have revised cross shaft geometry and shorter overall length, requiring less shim stack to achieve negative camber on lowered cars, or race and pro touring vehicles with aggressive alignments. The combination of cross shaft design and the shortened overall A-arm length gives you an improved camber curve through the front suspensions range of motion.BMR Suspension AAU401 Non-Adjustable Upper A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.
BMR AAU401 upper A-arms eliminate deflection, greatly improving steering feel and response in normal and performance driving situations.
Fits 1964-1972 GM A-Body;Delrin bushings eliminate upper A-arm deflection;Improves steering feel and response for normal and performance driving;Increased high-speed stability;Laser-cut, CNC-formed plate steel braces for extra strength;Fixture welded for precise fit;Dual-offset cross-shafts for minimizing shim stack;Requires less shim stack for negative camber than OE arms;Internally fluted, Delrin bushings;Two additional degrees of positive caster built into A-arms;Additional header clearance;Pre-assembled with new polyurethane bumpstops;Includes new upper ball joints;Durable powdercoat finish;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

The upper arms also have revised cross shaft geometry and shorter overall length, requiring less shim stack to achieve negative camber on lowered cars, or race and pro touring vehicles with aggressive alignments. The combination of cross shaft design and the shortened overall A-arm length gives you an improved camber curve through the front suspensions range of motion.BMR Suspension AAU401 Non-Adjustable Upper A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.
BMR AAU401 upper A-arms eliminate deflection, greatly improving steering feel and response in normal and performance driving situations.
Fits 1964-1972 GM A-Body;Delrin bushings eliminate upper A-arm deflection;Improves steering feel and response for normal and performance driving;Increased high-speed stability;Laser-cut, CNC-formed plate steel braces for extra strength;Fixture welded for precise fit;Dual-offset cross-shafts for minimizing shim stack;Requires less shim stack for negative camber than OE arms;Internally fluted, Delrin bushings;Two additional degrees of positive caster built into A-arms;Additional header clearance;Pre-assembled with new polyurethane bumpstops;Includes new upper ball joints;Durable powdercoat finish;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.500-inch, 0.095-inch wall and 1.525-inch, 0.095-inch wall DOM tubing with laser-cut, CNC-formed plate steel braces for extra strength, deflection is eliminated with A-arms from BMR Suspension. BMRs AA016 Lower A-arms are fitted with heavy-duty ball joints and greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMRs bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.BMRs AA016 Lower A-arms eliminate A-arm deflection, greatly improving steering feel and response in normal and performance driving situations. The polyurethane bushings add strength and reduce deflection over the stock rubber bushing, while still absorbing much of the NVH. The tubular design gives you tons of added strength and a significant reduction in weight over the stock arms. The means you get a great blend of performance and comfort. Designed for street performance, drag race, and handling, and pro-touring applications.BMR Suspension AA016 Non-Adjustable Lower A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.Control arm hardware kit RH006 (Includes upper and lower control arm hardware – Highly Recommended) also available.
BMR AA016 lower A-arms eliminate deflection, greatly improving steering feel and response in normal and performance driving situations.
Fits 1964-1972 GM A-Body;Eliminates lower A-arm deflection;Improves steering feel and response for normal and performance driving;Laser-cut, CNC-formed plate steel braces for extra strength;Fixture welded for precise fit;Internally fluted, high durometer polyurethane bushings;Pre-assembled with new polyurethane bumpstops;Includes new lower ball joints;Durable powdercoat finish;Proudly made in the U.S.A.

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.500-inch, 0.095-inch wall and 1.525-inch, 0.095-inch wall DOM tubing with laser-cut, CNC-formed plate steel braces for extra strength, deflection is eliminated with A-arms from BMR Suspension. BMRs AA016 Lower A-arms are fitted with heavy-duty ball joints and greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMRs bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.BMRs AA016 Lower A-arms eliminate A-arm deflection, greatly improving steering feel and response in normal and performance driving situations. The polyurethane bushings add strength and reduce deflection over the stock rubber bushing, while still absorbing much of the NVH. The tubular design gives you tons of added strength and a significant reduction in weight over the stock arms. The means you get a great blend of performance and comfort. Designed for street performance, drag race, and handling, and pro-touring applications.BMR Suspension AA016 Non-Adjustable Lower A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.Control arm hardware kit RH006 (Includes upper and lower control arm hardware – Highly Recommended) also available.
BMR AA016 lower A-arms eliminate deflection, greatly improving steering feel and response in normal and performance driving situations.
Fits 1964-1972 GM A-Body;Eliminates lower A-arm deflection;Improves steering feel and response for normal and performance driving;Laser-cut, CNC-formed plate steel braces for extra strength;Fixture welded for precise fit;Internally fluted, high durometer polyurethane bushings;Pre-assembled with new polyurethane bumpstops;Includes new lower ball joints;Durable powdercoat finish;Proudly made in the U.S.A.

These are the perfect upgrade for the enthusiast looking to improve performance, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!BMR Suspensions TCA034 non-adjustable polyurethane lower control arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.Control arm hardware kit RH002 (includes upper and lower control arm hardware – Highly Recommended) is also available.
BMR Suspension designed its TCA034 Lower control arms to work well in street performance, drag race, and handling applications.
Fits all 1964-1972 GM A-bodies;Non-adjustable design;Retains factory sway bar mounts;High-durometer internally fluted polyurethane greasable bushings;MIG-welded 1-inch DOM steel tubing;Dramatically reduces control arms flex;Greatly reduces bushing deflection;Improved Performance with acceptable NVH levels;Designed for street performance, drag race, and road race applications;Durable powdercoat finish;1-2 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

These are the perfect upgrade for the enthusiast looking to improve performance, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!BMR Suspensions TCA034 non-adjustable polyurethane lower control arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.Control arm hardware kit RH002 (includes upper and lower control arm hardware – Highly Recommended) is also available.
BMR Suspension designed its TCA034 Lower control arms to work well in street performance, drag race, and handling applications.
Fits all 1964-1972 GM A-bodies;Non-adjustable design;Retains factory sway bar mounts;High-durometer internally fluted polyurethane greasable bushings;MIG-welded 1?-inch DOM steel tubing;Dramatically reduces control arms flex;Greatly reduces bushing deflection;Improved Performance with acceptable NVH levels;Designed for street performance, drag race, and road race applications;Durable powdercoat finish;1-2 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

These A-arms utilize tall ball joints, drastically improving the camber curve over OE arms/ball joints. This camber gain ensures maximum tire contact while cornering. The upper arms also have revised cross shaft geometry and shorter overall length, requiring less shim stack to achieve negative camber on lowered cars, or race and pro touring vehicles with aggressive alignments. The combination of cross shaft design and the shortened overall A-arm length gives you a improved camber curve through the front suspensions range of motion.BMR Suspension AA028 Non-Adjustable Upper A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.Control arm hardware kit RH006 (Includes upper and lower control arm hardware – Highly Recommended) also available.
BMR AA028 upper A-arms eliminate deflection, greatly improving steering feel and response in normal and performance driving situations.
Fits 1964-1972 GM A-Body;Feature tall ball joints;Eliminates upper A-arm deflection;Improves steering feel and response for normal and performance driving;Increased high-speed stability;Laser-cut, CNC-formed plate steel braces for extra strength;Fixture welded for precise fit;Dual-offset cross-shafts for minimizing shim stack;Requires less shim stack for negative camber than OE arms;Internally fluted, high durometer polyurethane bushings;Two additional degrees of positive caster built into A-arms;Adds additional headers clearance;Pre-assembled with new polyurethane bumpstops;Includes new upper ball joints;Durable powdercoat finish;Proudly made in the U.S.A.

These A-arms utilize tall ball joints, drastically improving the camber curve over OE arms/ball joints. This camber gain ensures maximum tire contact while cornering. The upper arms also have revised cross shaft geometry and shorter overall length, requiring less shim stack to achieve negative camber on lowered cars, or race and pro touring vehicles with aggressive alignments. The combination of cross shaft design and the shortened overall A-arm length gives you a improved camber curve through the front suspensions range of motion.BMR Suspension AA028 Non-Adjustable Upper A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.Control arm hardware kit RH006 (Includes upper and lower control arm hardware – Highly Recommended) also available.
BMR AA028 upper A-arms eliminate deflection, greatly improving steering feel and response in normal and performance driving situations.
Fits 1964-1972 GM A-Body;Feature tall ball joints;Eliminates upper A-arm deflection;Improves steering feel and response for normal and performance driving;Increased high-speed stability;Laser-cut, CNC-formed plate steel braces for extra strength;Fixture welded for precise fit;Dual-offset cross-shafts for minimizing shim stack;Requires less shim stack for negative camber than OE arms;Internally fluted, high durometer polyurethane bushings;Two additional degrees of positive caster built into A-arms;Adds additional headers clearance;Pre-assembled with new polyurethane bumpstops;Includes new upper ball joints;Durable powdercoat finish;Proudly made in the U.S.A.

Added to the factory 2 degrees of caster, this allows you to achieve up to 6 degrees of total positive caster. This gives you improved geometry and increased lateral grip during cornering situations. The upper arms also have revised cross shaft geometry and shorter overall length, requiring less shim stack to achieve negative camber on lowered cars, or race and pro touring vehicles with aggressive alignments. The combination of cross shaft design and the shortened overall A-arm length gives you a improved camber curve through the front suspensions range of motion.BMR Suspension AA033 Non-Adjustable Upper and Lower A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 4-5 hours. Proudly made in the U.S.A.Control arm hardware kit RH006 (Includes upper and lower control arm hardware – Highly Recommended) also available.
BMR AA033 A-arm kit eliminates deflection, greatly improving steering feel and response in normal and performance driving situations.
Fits 1964-1972 GM A-Body;Eliminates upper and lower A-arm deflection;Improves steering feel and response for normal and performance driving;Increased high-speed stability;Laser-cut, CNC-formed plate steel braces for extra strength;Fixture welded for precise fit;Dual-offset cross-shafts for minimizing shim stack;Requires less shim stack for negative camber than OE arms;Internally fluted, high durometer polyurethane bushings;Two additional degrees of positive caster built into A-arms;Adds additional headers clearance;Pre-assembled with new polyurethane bumpstops;Includes new upper and lower ball joints;Durable powdercoat finish;Proudly made in the U.S.A.

BMR Suspension AA017 Non-Adjustable Upper A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.Control arm hardware kit RH006 (Includes upper and lower control arm hardware – Highly Recommended) also available.
BMR AA017 upper A-arms eliminate deflection, greatly improving steering feel and response in normal and performance driving situations.
Fits 1964-1972 GM A-Body;Eliminates upper A-arm deflection;Improves steering feel and response for normal and performance driving;Increased high-speed stability;Laser-cut, CNC-formed plate steel braces for extra strength;Fixture welded for precise fit;Dual-offset cross-shafts for minimizing shim stack;Requires less shim stack for negative camber than OE arms;Internally fluted, high durometer polyurethane bushings;Two additional degrees of positive caster built into A-arms;Adds additional headers clearance;Pre-assembled with new polyurethane bumpstops;Includes new upper ball joints;Durable powdercoat finish;Proudly made in the U.S.A.

The upper arms also have revised cross shaft geometry and shorter overall length, requiring less shim stack to achieve negative camber on lowered cars, or race and pro touring vehicles with aggressive alignments. The combination of cross shaft design and the shortened overall A-arm length gives you a improved camber curve through the front suspensions range of motion.BMR Suspension AA017 Non-Adjustable Upper A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.Control arm hardware kit RH006 (Includes upper and lower control arm hardware – Highly Recommended) also available.
BMR AA017 upper A-arms eliminate deflection, greatly improving steering feel and response in normal and performance driving situations.
Fits 1964-1972 GM A-Body;Eliminates upper A-arm deflection;Improves steering feel and response for normal and performance driving;Increased high-speed stability;Laser-cut, CNC-formed plate steel braces for extra strength;Fixture welded for precise fit;Dual-offset cross-shafts for minimizing shim stack;Requires less shim stack for negative camber than OE arms;Internally fluted, high durometer polyurethane bushings;Two additional degrees of positive caster built into A-arms;Adds additional headers clearance;Pre-assembled with new polyurethane bumpstops;Includes new upper ball joints;Durable powdercoat finish;Proudly made in the U.S.A.