Control Arms

This eliminates almost all lower control arm movement, reducing wheelhop and increases handling stability, while giving you a much improved overall feel in any performance driving situation.BMR Suspensions CBK774 Lower Control Arm Spherical Bearings are available in a durable silver zinc finish. Installation time is about 2-3 hours. Proudly made in the U.S.A.!
BMR Suspension CBK774 Lower Control Arm Spherical Bushing Kit is the perfect wheelhop solution for any S650 Mustang being used for performance driving.
Fits 2024 S650 Mustangs;Designed for street performance, drag race, and handling applications;Replaces the factory lower control arm bushings;Heavy-duty 1-inch spherical bearings;Machined bearing cups;Zinc coated for corrosion protection;CNC-machined 6061-T6 billet aluminum spacers;Eliminates rear lower control arm bushings deflection;Decreases wheelhop;Increases throttle response;Increases traction;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

When performance is a must, rely on BMR Suspension!BMR Suspensions UTCA043 on-car adjustable polyurethane upper control arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.
BMR Suspension designed the UTCA043 to excel in street performance, drag race, and road race applications.
Fits 1964-1967 GM A-Body;On-car adjustable design;CNC-machined chromoly center adjuster;95-Durometer polyurethane bushing;MIG-welded 1 1/4-inch DOM steel tubing;Dramatically reduces control arms flex;Reduces bushing deflection;Designed for street performance, drag race, and road race applications;Durable powdercoat finish;2-3 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

The adjustable design allows for fine-tuning of the pinion angle for proper driveline alignment. These are the perfect upgrade for the enthusiast looking to improve performance, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!BMR Suspensions UTCA011 on-car adjustable polyurethane upper control arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.Control arm hardware kit RH002 (includes upper and lower control arm hardware – Highly Recommended) is also available.
BMR Suspension designed the UTCA011 to excel in street performance, drag race, and road race applications.
Fits 1964-1967 GM A-body;On-car adjustable design;High-durometer internally fluted polyurethane greasable bushings;CNC-machined chrome-moly center adjuster;TIG-welded chrome-moly tube adapters;MIG-welded 1 5/8-inch DOM steel tubing;Dramatically reduces control arms flex;Greatly reduces bushing deflection;Improved Performance with OEM-like NVH levels;Designed for street performance, drag race, and road race applications;Durable powdercoat finish;1-2 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

When performance is a must, rely on BMR Suspension!BMR Suspensions UTCA043 on-car adjustable polyurethane upper control arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.
BMR Suspension designed the UTCA043 to excel in street performance, drag race, and road race applications.
Fits 1964-1967 GM A-Body;On-car adjustable design;CNC-machined chromoly center adjuster;95-Durometer polyurethane bushing;MIG-welded 1 1/4-inch DOM steel tubing;Dramatically reduces control arms flex;Reduces bushing deflection;Designed for street performance, drag race, and road race applications;Durable powdercoat finish;2-3 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

The adjustable design allows for fine-tuning of the pinion angle for proper driveline alignment. These are the perfect upgrade for the enthusiast looking to improve performance, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!BMR Suspensions UTCA011 on-car adjustable polyurethane upper control arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.Control arm hardware kit RH002 (includes upper and lower control arm hardware – Highly Recommended) is also available.
BMR Suspension designed the UTCA011 to excel in street performance, drag race, and road race applications.
Fits 1964-1967 GM A-body;On-car adjustable design;High-durometer internally fluted polyurethane greasable bushings;CNC-machined chrome-moly center adjuster;TIG-welded chrome-moly tube adapters;MIG-welded 1 5/8-inch DOM steel tubing;Dramatically reduces control arms flex;Greatly reduces bushing deflection;Improved Performance with OEM-like NVH levels;Designed for street performance, drag race, and road race applications;Durable powdercoat finish;1-2 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

Proudly made in the U.S.A.
BMR Suspension designed the UTCA044 to excel in street performance, drag race, and road race applications.
Fits 1964-1967 GM A-Body;On-car adjustable design;CNC-machined chromoly center adjuster;Heavy-duty Teflon-lined rod ends ;CNC-machined 7075 billet aluminum rod end spacers;MIG-welded 1 1/4-inch DOM steel tubing;Dramatically reduces control arms flex;Eliminates bushing deflection;Designed for street performance, drag race, and road race applications;Durable powdercoat finish;2-3 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

Launching harder, reducing wheel hop, and adding cornering consistency to your 1964-1972 GM A-body is easy with lower control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMRs rod end, double-adjustable tubular control arms for GM A-bodies (TCA038) are TIG-welded using heavy-duty DOM steel tubing. This design gives you a strong control arm that greatly improves performance.BMR Suspension designed the TCA038 to excel in street performance, drag race, and road race applications. The stock control arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and youre left with poor performance. The TCA038s heavy-duty construction eliminates control arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMRs heavy-duty rod ends are designed to solidly link the rearend to the body, eliminate deflection and wasted power. Our rod ends will stand up to high loads of any performance environment, offering all of the bind-free suspension articulation needed for great handling. These are the perfect upgrade for the enthusiast looking to greatly improve performance without NVH levels being a concern. When performance is a must, rely on BMR Suspension!BMR Suspensions TCA038 double-adjustable rod end lower control arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.
BMR Suspension designed its TCA038 Lower control arms to work well in street performance, drag race, and handling applications.
Fits all 1964-1972 GM A-bodies;Double adjustable;Heavy-duty Viking Performance Teflon-lines rod ends;All 304 stainless steel rod end spacers;TIG-welded DOM steel tubing;Dramatically reduces control arms flex;Eliminates bushing deflection;Massive increase is suspension articulation;Offset for increased tire clearance;Designed for street performance, drag race, and road race applications;Durable powdercoat finish;1-2 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

Launching harder, reducing wheel hop, and adding cornering consistency to your 1964-1972 GM A-body is easy with lower control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMRs rod end, double-adjustable tubular control arms for GM A-bodies (TCA038) are TIG-welded using heavy-duty DOM steel tubing. This design gives you a strong control arm that greatly improves performance.BMR Suspension designed the TCA038 to excel in street performance, drag race, and road race applications. The stock control arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and youre left with poor performance. The TCA038s heavy-duty construction eliminates control arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMRs heavy-duty rod ends are designed to solidly link the rearend to the body, eliminate deflection and wasted power. Our rod ends will stand up to high loads of any performance environment, offering all of the bind-free suspension articulation needed for great handling. These are the perfect upgrade for the enthusiast looking to greatly improve performance without NVH levels being a concern. When performance is a must, rely on BMR Suspension!BMR Suspensions TCA038 double-adjustable rod end lower control arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.
BMR Suspension designed its TCA038 Lower control arms to work well in street performance, drag race, and handling applications.
Fits all 1964-1972 GM A-bodies;Double adjustable;Heavy-duty Viking Performance Teflon-lines rod ends;All 304 stainless steel rod end spacers;TIG-welded DOM steel tubing;Dramatically reduces control arms flex;Eliminates bushing deflection;Massive increase is suspension articulation;Offset for increased tire clearance;Designed for street performance, drag race, and road race applications;Durable powdercoat finish;1-2 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.500-inch, 0.095-inch wall and 1.525-inch, 0.095-inch wall DOM tubing with laser-cut, CNC-formed plate steel braces for extra strength, deflection is eliminated with A-arms from BMR Suspension. BMRs AAL401 Lower A-arms are fitted with heavy-duty ball joints and greaseable, Delrin bushings add a solid, more responsive feel over the stock rubber bushings. BMRs bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures reliable operation over the life of the bushings.BMRs AAL401 Lower A-arms eliminate A-arm deflection, greatly improving steering feel and response in normal and performance driving situations. The Delrin bushings add strength and eliminate deflection compared to stock rubber bushings. The tubular design gives you tons of added strength and a significant reduction in weight over the stock arms. The means you get a great blend of performance and comfort. Designed for street performance, drag race, and road course applications.BMR Suspension AAL401 Non-Adjustable Lower A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.
BMR AAL401 lower A-arms eliminate deflection, greatly improving steering feel and response in normal and performance driving situations.
Fits 1964-1972 GM A-Body;Eliminates lower A-arm deflection;Improves steering feel and response for normal and performance driving;Laser-cut, CNC-formed plate steel braces for extra strength;Fixture welded for precise fit;Internally fluted, Delrin bushings;Pre-assembled with new polyurethane bumpstops;Includes new lower ball joints;Durable powdercoat finish;Proudly made in the U.S.A.

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.500-inch, 0.095-inch wall and 1.525-inch, 0.095-inch wall DOM tubing with laser-cut, CNC-formed plate steel braces for extra strength, deflection is eliminated with A-arms from BMR Suspension. BMRs AAL401 Lower A-arms are fitted with heavy-duty ball joints and greaseable, Delrin bushings add a solid, more responsive feel over the stock rubber bushings. BMRs bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures reliable operation over the life of the bushings.BMRs AAL401 Lower A-arms eliminate A-arm deflection, greatly improving steering feel and response in normal and performance driving situations. The Delrin bushings add strength and eliminate deflection compared to stock rubber bushings. The tubular design gives you tons of added strength and a significant reduction in weight over the stock arms. The means you get a great blend of performance and comfort. Designed for street performance, drag race, and road course applications.BMR Suspension AAL401 Non-Adjustable Lower A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.
BMR AAL401 lower A-arms eliminate deflection, greatly improving steering feel and response in normal and performance driving situations.
Fits 1964-1972 GM A-Body;Eliminates lower A-arm deflection;Improves steering feel and response for normal and performance driving;Laser-cut, CNC-formed plate steel braces for extra strength;Fixture welded for precise fit;Internally fluted, Delrin bushings;Pre-assembled with new polyurethane bumpstops;Includes new lower ball joints;Durable powdercoat finish;Proudly made in the U.S.A.