Catback

Creates maximum performance and extreme mileage gains. The free flowing rear side exit exhaust system is constructed out of 2.25 in. mandrel bent 409 stainless steel and uses bayonet style hangers and band clamps for a hassle free installation. Fits both the slip-fit and flange-fit cats thats both on the OE cat and universal cats. Uses all factory mounting locations providing stability and a hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface eliminating leak paths. A straight through designed; free flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.
MACH Force-Xp 2-1/2 IN 409 Stainless Steel Cat-Back Exhaust System Jeep Wrangler (TJ) 97-06 L6-4.0L

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.
MACH Force-Xp 3 IN 409 Stainless Steel Cat-Back Exhaust System Ford F-150 09-10 V8-4.6/5.4L

The aFe Universal fit Aluminized or 409 Stainless Steel Performance Muffler is designed to provide a deep, throaty, powerful sound on acceleration but maintain a smooth sound at idle. This muffler is constructed of either Aluminized steel or brushed finished 409 stainless steel and uses a straight through perforated core with heat resistant packing to reduce backpressure and maximize exhaust flow. You will see increased performance and improved throttle response over the factory exhaust.
MACH Force-Xp 409 Stainless Steel Muffler 4 IN ID Center/Center x 8 IN Dia x 30 IN L

The aFe Universal fit Aluminized or 409 Stainless Steel Performance Muffler is designed to provide a deep, throaty, powerful sound on acceleration but maintain a smooth sound at idle. This muffler is constructed of either Aluminized steel or brushed finished 409 stainless steel and uses a straight through perforated core with heat resistant packing to reduce backpressure and maximize exhaust flow. You will see increased performance and improved throttle response over the factory exhaust.
MACH Force-Xp 409 Stainless Steel Muffler 5in ID Inlet & Outlet, 30in Length, 8in Diameter

Bring the maximum power out of your exhaust with the aFe Power Muffler-Delete Pipe. This pipe is constructed out of 409 stainless steel and is used to eliminate the 5 IN In/Out muffler used in most 5 IN performance exhaust systems. You will love the aggressive exhaust note your system can offer while maximizing exhaust flow, throttle response and performance.

Nothing looks cooler than a huge tip completing your exhaust system. The aFe Power tip is constructed out of high luster, polished 304 stainless steel and has a slash cut and an aFe Power logo lazer etched into the top of the tip. A drain port on the bottom keeps rust and corrosion away.
MACH Force-Xp 409 Stainless Steel Clamp-on Exhaust Tip Black Chrome 4 IN Inlet x 6 IN Outlet x 15 IN L

100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks. Paired opposite firing cylinders with equal, specifically tuned primary lengths maximizes scavenging and increases torque throughout the powerband. High grade stainless tubing with a uniform brushed finish provides a beautiful look and high resistance to corrosion. aFe has designed this system to retain all your factory sensors for a hassle free installation. Also included are extensions for a simple plug & play installation. High quality laser cut header flanges provides superior sealing at the head surface. Machined flanges and USA made stainless v-band clamps provide a simple to install leak free joint between the headers and X-pipe. A direct bolt-on system which requires no cutting or drilling to provide a hassle-free installation. This system is constructed of mandrel bent, stainless steel brushed tubing for maximum performance, corrosion resistance and strength eliminating cracking. This system includes dual, hi-flow, 200 CPSI, stainless steel catalytic converters for maximum flow and performance. aFe PFADT Series Headers & X-Pipes are engineered and manufactured in our Corona, California manufacturing facility. This system is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.
MACH Force-Xp 409 Stainless Steel Clamp-on Exhaust Tip Black 4 IN Inlet x 5 IN Outlet x 12 IN L

Aggressive Sound: A free-flowing, transverse muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The muffler is finished with a high-temp powder-coated black finish and a stamped aFe power logo. Exhaust Valve: This -catback exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Simple Installation: This MACH Force-Xp cat-back exhaust system uses factory mounting locations providing stability and a hassle-free installation. Dual 4″ Polished Tips: Finishing off this system are dual 4″ diameter, polished, 304 stainless steel tips. The tips come with a laser-etched aFe power logo for an aggressive style. Leak-Free Seal: High quality band clamps are used for a complete 360 degree sealing surface. Brushed 304 SS Construction: The performance cat-back exhaust system is constructed of 3″ to 2-1/2″ mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.
MACH Force-Xp Stainless Steel Cat-Back Exhaust System w/Polished Tips BMW 340i (F30) /440i (F32/33) 16-20 L6-3.0L (t) B58

aFe Power is proud to introduce the all new diesel exhaust tip. This tip comes with a matte-black finish and is designed to fit 5″ exhaust systems. With a 5″ inlet x 6″ outlet and 15″ inch length, this single-walled, slash cut rolled tip comes with a unique laser-cut aFe Power logo plate riveted on for an aggressive style. Leak-Free Seal: A high quality stainless steel band clamp is used for a complete 360 degree sealing surface. aFe Badging: Comes with a unique laser-cut aFe Power logo plate riveted on for an aggressive style. Drain Port: A drain port on the bottom of the tip keeps rust and corrosion away.
MACH Force-Xp 409 Stainless Steel Clamp-on Exhaust Tip Black 5 IN Inlet x 6 IN Outlet x 15 IN L

aFe Power introduces an all new Rebel Series dual middle-side exit exhaust system for the 2016-2017 Nissan Titan with V8-5.6L engine. This Rebel Series cat-back is designed with dual black exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe Power logos on the side and are constructed from stainless steel for durability. The exhaust system is constructed from 2-1/2″ MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. This kit uses a free-flowing muffler to absorb high pitch tones producing a powerful sound. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system.
Rebel Series 2-1/2″ Cat-Back Exhaust System w/ Black Tip Nissan Titan 17-24 V8-5.6L

This Rebel Series cat-back is designed with dual black exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe Power logos on the side and are constructed from stainless steel for durability. The exhaust system is constructed from 3″ MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system. 3-1/2″ Dia. Black Middle-Side Exit Tips: Finishing off the exhaust are dual 3-1/2″ diameter black 304 stainless steel clamp-on tips with a laser-etched aFe power logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look. Installation Is A Snap: This Rebel Series exhaust system uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the ha nger bushing in place for an OE-style fit that does not change with time. This makes for an easy installation with no cutting required.
Rebel Series 3 IN 409 Stainless Steel Cat-Back Exhaust System w/Black Tip Ford F-150 Raptor 17-20 V6-3.5L (tt)

This Takeda Cat-Back Exhaust System for the Honda Civic (Sedan) with the L4-1.5L turbo engine utilizes 2-1/2″ into 2-1/4″ stainless steel tubing and incorporates dual, high-flow mufflers for improved performance across the power band. To finish off the exhaust, are dual welded-on 3-1/2″ diameter 304 stainless steel polished tips. This system includes high quality clamps for a secure hassle-free installation. The dual free-flowing mufflers are used to absorb high pitch tones produce a powerful sound and unleashing all available horsepower and torque. High quality band clamps are used for a complete 360 degree sealing surface.
Takeda 2-1/4 to 2-1/2 IN 304 Stainless Steel Cat-Back Exhaust w/Polished Tips Honda Civic Sedan 16-21 L4-1.5L (t)