Carburetor Rebuild Components

One pair of valve cover PCV grommets. Fits standard 1-1/4″ diameter valve cover holes. The i.d. is .75″ to fit many common PCV valves. The rubber durometer was chosen to give a firm snug leak free fit.
PCV Grommet: 1-1/4″ Valve Cover Hole to .75″ Diameter Valve (qty 2)

The Edelbrock Carburetor Spacer #8718 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance. The Edelbrock #8718 cloverleaf, aluminum, open spacer is 1″ thick and works with Edelbrock 4500 Series cloverleaf manifolds.
Carburetor Spacer-4500-Style 1in. Open Spacer; Aluminum

The Edelbrock Carburetor Spacer #8719 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance. The Edelbrock #8719 is 3/4″ thick and made of wood fiber laminate. The superior heat insulating properties of wood fiber laminate are ideal for reducing heat transfer to the carb.
Carburetor Spacer-4500-Style 1in. Open Cloverleaf Spacer for Holley; Aluminum

The Edelbrock Q-Jet Carburetor Spacer #8726 4-hole design enhances low-rpm torque and throttle response and dampen reversion effects on the carb. The Edelbrock #8726 spacer is 3/4″ thick and made of wood fiber laminate. The superior heat insulating properties of wood fiber laminate are ideal for reducing heat transfer to the carb.
Carburetor Spacer-4150-Style 1/2in. Divided Spacer; Wood Fiber Laminate

The Edelbrock Carburetor Spacer #8724 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance. The Edelbrock #8724 is 1/2″ thick and made of wood fiber laminate. The superior heat insulating properties of wood fiber laminate are ideal for reducing heat transfer to the carb.
Carburetor Spacer-4150-Style 1/2in. Open Spacer; Wood Fiber Laminate

The Edelbrock #1990 Q-Jet rebuild kit is a complete set of gaskets and seals needed to rebuild Edelbrock Quadra jet carburetors part #1910 and M4M Q-Jets (1975 and Older)
Edelbrock Q-Jet rebuild kit for part #1910 quadrajet carburetors

The Edelbrock Carburetor Spacer #8719 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance. The Edelbrock #8719 is 3/4″ thick and made of wood fiber laminate. The superior heat insulating properties of wood fiber laminate are ideal for reducing heat transfer to the carb.
Carburetor Spacer-4150-Style 3/4in. Open Spacer; Wood Fiber Laminate

The Edelbrock #8971?Choke Block-Off Small Block Ford 351M/ 400M for #2171, #3711 Intake Manifold
The Edelbrock Choke Block-Off Small Block Ford 351M/ 400M for #2171, #3711 Intake Manifold
Ford:-:351M (5.8L)-400 (6.6L)

The Edelbrock?Choke Block-Off for Small Block Ford 351W/ 351C ?Intake Manifolds
The Edelbrock Choke Block-Off for Small Block Ford 351W/ 351C Intake Manifolds
Ford:-:351W (5.8L);Ford:-:351C (5.8L)

Edelbrock Marine Series 1409 carburetor calibration kit when installed on a 4.3L 90 Deg V6
Chevrolet:Small-Block Gen I 90 Deg V6:262 (4.3L)

Edelbrock part #9290 A/B epoxy is a two part epoxy that is great for cylinder head and intake modifications. Simply mix the two parts, apply and let cure. Once cured, it can be sanded to shape, drilled and tapped. Wash hands well after handling.
Edelbrock part #9290 A/B epoxy is a two part epoxy that is great for cylinder head and intake modifications. Simply mix the two parts, apply and let cure. Once cured, it can be sanded to shape, drilled and tapped.

Uni-Syn A Carburetor Balancing Instrument for 1 and 2-bbl with Round Top