Retainers

Ford Coyote and Boss 5.0L engines

Max Lift
Seat Load
Open Load
Rate
Coil Bind
Outer Diameter
Inner Diameter

.600″
120 lbs @ 1.57″
275 lbs @ 1.02″
258 lbs/in
.970″
Top 1.013″ / Bottom 1.101″
Top .650″ / Bottom .738″

Please note the above image does not show full spring kit.
Designed for ’11-’14 and ’15+ 5.0L Coyote and Boss engines, this beehive spring kit offers increased valve control at high RPM while allowing for higher valve lift from performance cams. Includes titanium retainers, seals and seats.
Available with Tool Steel retainers under 26125CTS-KIT.
Ford: Mustang 11 – 17 5 L Engine, Lincoln: Mark LT 11 – 14 5 L Engine, Ford: Lobo 11 – 17 5 L Engine, Ford: F-150 11 – 17 5 L Engine

• Designed for both 2011 – 2014 and 2015+ Ford Coyote and Boss 5.0L engines.
• higher RPM and more lift capacity than stock.
• Increased valve control at high RPM.
• Create higher load
• .600″ Maximum Lift

The COMP Cams .660″ Lift Conical Valve Spring Kits for Dodge Gen IV HEMIs features:

Max Lift: .660″
Increased High RPM Stability
Excellent spring upgrade for high performance and Race Applications
Includes valve springs, locks, Seals, seats, and Chromemoly retainers

Designed for ’09-’18 Dodge 5.7L HEMI, this Conical Spring Kit includes steel retainers, valve locks, seals and seats that require no machine work. Capable of 0.660″ valve lift, this kit removes the guesswork for your HEMI engine.
Available w/ Titanium Retainers under 7230TC-KIT.
09-’18 Dodge 5.7L HEMI

The COMP Cams .600″ Lift Beehive Valve Spring Kits for Ford 2018+ Coyote Applications features:_x000D_
_x000D_
Max Lift: .600″_x000D_
Increased Lift and High RPM Stability_x000D_
Excellent spring upgrade for high performance and boosted Applications_x000D_
Includes valve springs, locks, Seals, seats, and Chromemoly retainers_x000D_

A drop-in upgrade for Ford ’18+ Ford 5.0L Coyote engines, this Beehive spring kit includes Beehive valve springs, steel retainers, seats and seals: everything needed to make your Coyote capable of 0.600″ valve lift.
Available with Titanium Retainers under 26001TI-KIT.
2018+ Ford 5.0L Coyote

The COMP Cams .600″ Lift Beehive Valve Spring Kits for 2018+ Ford Coyote Applications features:_x000D_
_x000D_
Max Lift: .600″_x000D_
Increased High RPM Stability_x000D_
Excellent spring upgrade for high performance and boosted Applications_x000D_
Includes valve springs, locks, Seals, seats, and Titanium retainers_x000D_

A drop-in upgrade for Ford ’18+ Ford 5.0L Coyote engines, this Beehive spring kit includes Beehive valve springs, titanium retainers, seats and seals: everything needed to make your Coyote capable of 0.600″ valve lift.
Available with Chromemoly Steel Retainers under 26001CS-KIT.
2018+ Ford 5.0L Coyote

The COMP Cams .660″ Lift Conical Valve Spring Kits for Dodge Gen IV HEMIs features:

Max Lift: .660″
Increased High RPM Stability
Excellent spring upgrade for high performance and Race Applications
Includes valve springs, locks, Seals, seats, and Titanium retainers

Designed for ’09-’18 Dodge 5.7L HEMI, this Conical Spring Kit includes titanium retainers, valve locks, seals and seats that require no machine work. Capable of 0.660″ valve lift, this kit removes the guesswork for your HEMI engine.
Available w/ Chromemoly Steel Retainers under 7230CC-KIT.
09-’18 Dodge 5.7L HEMI

The springs conical design features a smaller diameter in the upper half to reduce active mass. This reduction in mass, along with the progressive frequency created by the conical shape, dampens coil oscillations better than any other spring design. These improvements allow for the use of more aggressive Camshafts and an increase in RPM limit speed. Finally, Superfinish processing of the springs results in increased durability and spring life.
Kit includes:

#7230-16 Conical Valve Springs
#1774-16 +.100 Tool Steel Retainers
#623-16 Valve Locks
#511-16 Valve Seals
#4680-16 Spring Seats

The .675″ Lift Conical Spring Kit with Tool Steel Retainers for GM LS1/LS3 allows users to easily install revolutionary Conical Valve Springs on any high performance GM LS1/LS3 engine.
LS1, LS2, LS3, LS6, 4.8, 5.3, 5.7, 6.0 and 6.2 engines

The .675″ Lift Conical Spring Kit with Tool Steel Retainers for GM LT1/LS7 Applications features a smaller diameter in the upper half to reduce active mass. This reduction in mass, along with the progressive frequency created by the conical shape, dampens coil oscillations better than any other spring design. These improvements in dynamic stability allow for the use of more aggressive Camshafts and an increase in RPM limit speed. Finally, Superfinish processing of the springs results in increased durability and spring life.
Kit includes:

#7230-16 Conical valve Springs
#1772-16 Tool Steel Retainers
#623-16 Valve Locks
#511-16 Valve Seals
#4680-16 Spring Seats

The .675″ Lift Conical Spring Kit with Tool Steel Retainers for GM LT1/LS7 Applications allows users to easily install revolutionary Conical Valve Springs on any high performance GM LT1/LS7 engine.
See 7230TI-KIT for Kit with Titanium Retainers, See 7230TI-KIT for Kit with Titanium Retainers
L83/L86/LT1/LS7 GM engines

The .675″ Lift Conical Spring Kit with Titanium Retainers for GM LT1/LS7 Applications features a smaller diameter in the upper half to reduce active mass. This reduction in mass, along with the progressive frequency created by the conical shape, dampens coil oscillations better than any other spring design. These improvements in dynamic stability allow for the use of more aggressive Camshafts and an increase in RPM limit speed. Finally, Superfinish processing of the springs results in increased durability and spring life.
Kit includes:

#7230-16 Conical valve Springs
#772-16 Titanium Retainers
#623-16 Valve Locks
#511-16 Valve Seals
#4680-16 Spring Seats

The .675″ Lift Conical Spring Kit with Titanium Retainers for GM LT1/LS7 Applications allows users to easily install revolutionary Conical Valve Springs on any high performance GM LT1/LS7 engine.
See 7230TS-KIT for Kit with Tool Steel Retainers
L83/L86/LT1/LS7 GM engines

Revolutionary Advancement In High Performance Spring Technology.

7256-16
Outer Diameter and
Inner Diameter and
Seat Load
Open Load
Coil Bind
Rate and

Top
1.060″
.660″
160 @ 1.900″
495 @ 1.210″
1.165″
485

Bottom
1.390″
.990″

Conical Valve Springs 160 @ 1.900″ / 495 @ 1.210″
Available individually under 7256-1

The COMP Cams .600″ Lift Beehive Valve Spring Kits for Dodge Gen III 6.1 HEMI’s features:

Max Lift: .600″
Increased High RPM Stability
Excellent spring upgrade for high performance and Race Applications
Includes valve springs, locks, Seals, seats, and Titanium retainers

Designed for Dodge 6.1L HEMI, this Beehive Spring Kit includes titanium retainers, valve locks, seals and seats that require no machine work. Capable of handling 0.600″ valve lift, this spring kit removes the guesswork for your HEMI engine.
Available w/ Chromemoly Steel Retainers under 26918CB-KIT.
Dodge 6.1L HEMI