Nitrous Systems

If you want the best, this is it. The NX EFI Race nitrous system is the top of the line EFI power booster on the market. From the highest flowing solenoids, to our patented Shark nozzle, this system screams nothing but quality. Includes jetting for 100, 150, 200 & 250HP. System comes complete with COMPOSITE nitrous bottle, stainless bottle bracket, Lightning solenoids, extra long stainless braided N2O line, and all necessary hardware to complete the installation.
DODGE EFI FULL RACE (100-150-200-300HP) DUAL NOZZLE WITH COMPOSITE BOTTLE

• Lightning 45 Bottle Valve

If you want the best, this is it. The NX EFI Race nitrous system is the top of the line EFI power booster on the market. From the highest flowing solenoids, to our patented Shark nozzle, this system screams nothing but quality. Includes jetting for 100, 150, 200 & 250HP. System comes complete with stainless bottle bracket, Lightning solenoids, extra long stainless braided N2O line, and all necessary hardware to complete the installation.
DODGE EFI FULL RACE (100-150-200-300HP) DUAL NOZZLE LESS BOTTLE

• Lightning 45 Bottle Valve

If you want the best, this is it. The NX EFI Race nitrous system is the top of the line EFI power booster on the market. From the highest flowing solenoids, to our patented Shark nozzle, this system screams nothing but quality. Includes jetting for 100, 150, 200 & 250HP. System comes complete with 10lb nitrous bottle, stainless bottle bracket, Lightning solenoids, extra long stainless braided N2O line, and all necessary hardware to complete the installation.
DODGE EFI RACE (100-150-200-250HP) SINGLE NOZZLE WITH 10LB BOTTLE

• CNC Aluminum and Carbon Fiber Tops For Weight Savings

If you want the best, this is it. The NX EFI Race nitrous system is the top of the line EFI power booster on the market. From the highest flowing solenoids, to our patented Shark nozzle, this system screams nothing but quality. Includes jetting for 100, 150, 200 & 250HP. System comes complete with 15lb nitrous bottle, stainless bottle bracket, Lightning solenoids, extra long stainless braided N2O line, and all necessary hardware to complete the installation.
DODGE EFI RACE (100-150-200-250HP) SINGLE NOZZLE WITH 15LB BOTTLE

• CNC Aluminum and Carbon Fiber Tops For Weight Savings

If you want the best, this is it. The NX EFI Race nitrous system is the top of the line EFI power booster on the market. From the highest flowing solenoids, to our patented Shark nozzle, this system screams nothing but quality. Includes jetting for 100, 150, 200 & 250HP. System comes complete with 5lb nitrous bottle, stainless bottle bracket, Lightning solenoids, extra long stainless braided N2O line, and all necessary hardware to complete the installation.
DODGE EFI RACE (100-150-200-250HP) SINGLE NOZZLE WITH 5LB BOTTLE

• CNC Aluminum and Carbon Fiber Tops For Weight Savings

If you want the best, this is it. The NX EFI Race nitrous system is the top of the line EFI power booster on the market. From the highest flowing solenoids, to our patented Shark nozzle, this system screams nothing but quality. Includes jetting for 100, 150, 200 & 250HP. System comes complete with COMPOSITE nitrous bottle, stainless bottle bracket, Lightning solenoids, extra long stainless braided N2O line, and all necessary hardware to complete the installation.
DODGE EFI RACE (100-150-200-250HP) SINGLE NOZZLE WITH COMPOSITE BOTTLE

• CNC Aluminum and Carbon Fiber Tops For Weight Savings

If you want the best, this is it. The NX EFI Race nitrous system is the top of the line EFI power booster on the market. From the highest flowing solenoids, to our patented Shark nozzle, this system screams nothing but quality. Includes jetting for 100, 150, 200 & 250HP. System comes complete with stainless bottle bracket, Lightning solenoids, extra long stainless braided N2O line, and all necessary hardware to complete the installation.
DODGE EFI RACE (100-150-200-250HP) SINGLE NOZZLE LESS BOTTLE

• CNC Aluminum and Carbon Fiber Tops For Weight Savings

The Stage 2.5 uses the progressive VC-50 controller (52mm Gauge) that proportionally injects more or less water methanol according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water methanol and allows cooling and performance improvements over a wide range for improved drivability. The Stage 2.5 Boost Cooler will make the induction charge colder, denser, and increase 91 octane fuel to 116 octane race gas levels allowing full power all the time! The VC-50 controller offers the functionality of a boost gauge and water methanol controller all in one! Highlighting a bright 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) O-LED screen displaying boost, percentage of injection, low level, secondary stage activation, prime button, and system fault codes directly on the screen. You can tailor the controller color to match your OEM gauges or mix and match up to two colors! This kit utilizes the only OEM approved water methanol injection pump on the market with proprietary heat flange, twin seals, and custom motor winding to run cooler and longer than the competition. The Extreme Environment 300 PSI UHO pump is designed to be in the elements with O-Ring connections that are then sealed and potted to ensure no moisture can enter the pump internals. The Stage 2.5 comes standard with 100% methanol resistant components using stainless steel, nickel plating, EPDM, and hard anodizing to ensure years of continued use.
Hellcat Lid With Nitrous and Water/Methanol System (100-400HP) W/No Bottle

• Quick And Clean Install

The Stage 2.5 uses the progressive VC-50 controller (52mm Gauge) that proportionally injects more or less water methanol according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water methanol and allows cooling and performance improvements over a wide range for improved drivability. The Stage 2.5 Boost Cooler will make the induction charge colder, denser, and increase 91 octane fuel to 116 octane race gas levels allowing full power all the time! The VC-50 controller offers the functionality of a boost gauge and water methanol controller all in one! Highlighting a bright 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) O-LED screen displaying boost, percentage of injection, low level, secondary stage activation, prime button, and system fault codes directly on the screen. You can tailor the controller color to match your OEM gauges or mix and match up to two colors! This kit utilizes the only OEM approved water methanol injection pump on the market with proprietary heat flange, twin seals, and custom motor winding to run cooler and longer than the competition. The Extreme Environment 300 PSI UHO pump is designed to be in the elements with O-Ring connections that are then sealed and potted to ensure no moisture can enter the pump internals. The Stage 2.5 comes standard with 100% methanol resistant components using stainless steel, nickel plating, EPDM, and hard anodizing to ensure years of continued use.
Hellcat Lid With Nitrous and Water/Methanol System (100-400HP) W/10LB Bottle

• Quick And Clean Install

This is the upgrade your Hellcat wants! The Billet Supercharger Lid for Hellcat/Demon applications replaces the factory supercharger lid for a quick and clean install. The improved airflow design of the lid ensures maximum flow and the placement of nitrous and water methanol passages provides huge increases in horsepower and torque. The spraybar-less nitrous system injects nitrous and fuel in line with the supercharger air discharge so the fuel / nitrous mixture is swept evenly to each runner. Injecting nitrous into this pre intercooled hot air discharge super-cools the air charge resulting in increased flow across the factory intercoolers for maximum power gains. As mentioned, this system is a ‘spraybar-less’ design, which means that the nitrous/fuel passages are CNC machined into the lid itself so the spray pattern is in the perfect location every time.
Hellcat Lid With Nitrous and Water/Methanol System (100-400HP) W/12LB Bottle

• Quick And Clean Install

This is the upgrade your Hellcat wants! The Billet Supercharger Lid for Hellcat/Demon applications replaces the factory supercharger lid for a quick and clean install. The improved airflow design of the lid ensures maximum flow and the placement of nitrous and water methanol passages provides huge increases in horsepower and torque. The spraybar-less nitrous system injects nitrous and fuel in line with the supercharger air discharge so the fuel / nitrous mixture is swept evenly to each runner. Injecting nitrous into this pre intercooled hot air discharge super-cools the air charge resulting in increased flow across the factory intercoolers for maximum power gains. As mentioned, this system is a ‘spraybar-less’ design, which means that the nitrous/fuel passages are CNC machined into the lid itself so the spray pattern is in the perfect location every time.
Hellcat Lid With Nitrous and Water/Methanol System (100-400HP) W/15LB Bottle

• Quick And Clean Install

The Stage 2.5 uses the progressive VC-50 controller (52mm Gauge) that proportionally injects more or less water methanol according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water methanol and allows cooling and performance improvements over a wide range for improved drivability. The Stage 2.5 Boost Cooler will make the induction charge colder, denser, and increase 91 octane fuel to 116 octane race gas levels allowing full power all the time! The VC-50 controller offers the functionality of a boost gauge and water methanol controller all in one! Highlighting a bright 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) O-LED screen displaying boost, percentage of injection, low level, secondary stage activation, prime button, and system fault codes directly on the screen. You can tailor the controller color to match your OEM gauges or mix and match up to two colors! This kit utilizes the only OEM approved water methanol injection pump on the market with proprietary heat flange, twin seals, and custom motor winding to run cooler and longer than the competition. The Extreme Environment 300 PSI UHO pump is designed to be in the elements with O-Ring connections that are then sealed and potted to ensure no moisture can enter the pump internals. The Stage 2.5 comes standard with 100% methanol resistant components using stainless steel, nickel plating, EPDM, and hard anodizing to ensure years of continued use.
Hellcat Lid With Nitrous and Water/Methanol System (100-400HP) W/5LB Bottle

• Quick And Clean Install