-
Improve the power and efficiency of your 2017-2019 Chevrolet/GMC 6.6L Duramax L5P with our Mishimoto intercooler pipe and boot kit. The factory L5P intercooler pipes are a measly 2.5in diameter that chokes the engine, while tight bends and a resonator on the hot side create even more restriction.The Mishimoto intercooler pipes are 3in in diameter throughout with smooth transitions to significantly increase airflow, resulting in more power potential. Our hot-side pipe also eliminates the stock resonator for maximum flow. Combined, the Mishimoto intercooler pipes are up to 55-percent less restrictive than stock.Both the hot-side and cold-side utilize a two-piece design for ease of install. To connect the pipes to our Duramax, this kit also includes our silicone boots with DuraCore(TM) technology. Mishimoto DuraCore(TM) technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore(TM) provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts.To add even more reliability, this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. Our cold-side intercooler pipes also feature a CNC-machined quick-disconnect fitting with new O-ring and spring clip to ensure a secure and leak-free fit. Unlike other available pipes on the market, our pipes retain the intake air temp harness mounting location for safe and secure wire routing, just as Chevy/GMC intended. Our intercooler pipes also incorporate two bungs that can be drilled and tapped for sensors, so you can easily monitor your L5P’s performance.The Mishimoto 2017-2019 Chevrolet/GMC 6.6L Duramax L5P intercooler pipe and boot kit is a direct bolt-on upgrade and is available in a polished or wrinkle black powder coated finish. Like all our Duramax products, this kit includes our Mishimoto Lifetime Warranty.
Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.- 3.0-in mandrel-bent aluminum polished pipes eliminate restrictive bends
- Includes new quick-disconnect O-ring and spring clip
- Up to 55-percent less restrictive than stock piping
-
The 2019-2023 Ford Ranger 2.3L EcoBoost is one of the most capable small trucks on the planet, and it deserves a cooling system that’s equally capable. That’s why Mishimoto has developed a performance intercooler kit that’s as capable as the Ranger itself. This Mishimoto performance intercooler kit includes our bar-and-plate intercooler and mandrel-bent aluminum intercooler pipes. The intercooler’s core is designed specifically to meet the Ranger’s needs and is TIG-welded to durable cast-aluminum end tanks. The bar-and-plate core gives our intercooler increased durability against heat, pressure, and debris on the road or trail. The Mishimoto intercooler is also 24-percent less restrictive than stock, with a 46-percent increase in core volume, and a 49-percent increase in fin surface area over for even more efficient cooling. Our performance intercooler pipes are constructed from mandrel-bent aluminum with a polished or micro-wrinkle black powder-coated finish. These pipes eliminate restrictive bends in the factory pipe, allowing for up to 25-percent better flow and more power potential. The Mishimoto intercooler pipes are also larger than stock, with a 19.86-percent increase in volume to let your turbo breathe easy. This intercooler kit produces dyno-proven gains of 13.6 whp and 13.9 lb-ft of torque, all while maintaining less pressure drop than the stock intercooler system. This Mishimoto 2019-2023 Ford Ranger 2.3L EcoBoost Performance Intercooler Kit includes Mishimoto Silicone Boots with DuraCore(TM) technology and high-torque worm gear clamps for consistent holding power. Bungs on the intercooler end tank and cold-side intercooler pipe can be drilled and tapped for a boost sensor or water-meth injection. The CNC-machined quick-disconnect inlet and outlet make installation a breeze. Like all our Ford Ranger parts, this 2019-2023 Ford Ranger Performance Intercooler kit is backed by our Mishimoto Lifetime Warranty for a lifetime of performance.
Complete intercooler kit engineered to reduce intake air temperatures for increased power and efficiency. Includes high-quality components for optimal airflow, improved throttle response, and a precise, easy installation.- Dyno-proven max gains of 13.6 wheel-horsepower and 13.9 lb-ft of torque
- 7F reduction in outlet temperature over stock intercooler
- Direct-fit for 2019-2023 Ford Ranger 2.3L EcoBoost
-
Mishimoto has developed an intercooler pipe and boot kit specifically engineered for use on the 2013+ Dodge 6.7L Cummins. After investigating the pipe routing and size, our engineers identified numerous areas where improvement was necessary. The Mishimoto Cummins performance intercooler pipes are constructed of mandrel-bent aluminum routed in a way that eliminates restrictive bends present in the factory pipes. Mishimoto engineers also increased the pipe diameter to provide substantial improvements in airflow. Mishimoto DuraCore? boots and Constant-Tension T-bolt clamps are also included in this Cummins performance kit. Mishimoto DuraCore? technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore? provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. The Mishimoto Dodge 6.7L Cummins Intercooler Pipe and Boot Kit is designed to work with the Mishimoto Dodge 6.7L Cummins Performance Intercooler and like all of our Cummins performance parts, includes the Mishimoto Lifetime Warranty.
Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.- Includes hot-side and cold-side intercooler pipes and boots
- 3-in Mandrel-bent polished aluminum piping
- Reduces turbo stress and extends life
-
Open up the flow of the charged air in your 2013-2018 Ford Focus ST with the Mishimoto hot-side intercooler pipe. The stock hot-side pipe in your Focus ST is plagued with bends, a restrictive inner diameter and muffling equipment which slows the airflow and causes turbulence on the way to the intercooler. Mishimoto’s hot-side intercooler kit not only reduces the amount of bends, but also increased the diameter to 2.5? giving it a 14-percent increase in volume over the stock piping meaning better flow and the added bonus of 8hp and 10ft/lbs of torque.While a majority of the stock piping is constructed from aluminum already, the couplers are made from degradation-prone rubber. Our kit includes more durable silicone couplers featuring 5-layers of heat-resistant fibers and wire reinforcement to ensure that the Mishimoto hot-side intercooler pipe can stand up to the heat. This kit is offered in a polished finish as well as a wrinkle black powder coat, and is covered under Mishimoto’s Lifetime Warranty.
Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.- 14-percent increase in volume over stock hot-side pipe
- 26-percent greater flow than stock hot-side pipe
- 2.5-in Mandrel-bent aluminum piping
-
Open up the flow of the charged air in your 2013-2018 Ford Focus ST with the Mishimoto Performance Intercooler Piping Kit. The piping equipped on the 2.0L EcoBoost engine from the factory is riddled with bends, restrictive piping diameters, and degradation-prone materials, all of which slow the air to and from your intercooler putting a strain on the FOST?s performance. We here at Mishimoto strive to free the flow of the charged air in your sporty Focus. To start we removed the turbo muffler from the design of the hot-side stock piping, and reduced the amount of bends giving the airflow a more direct flow from the turbo to the intercooler. On top of the reduction of bends, we increased the inner diameter of the piping to 2.5 inches of high-grade aluminum, allowing for a 14-percent increase in volume and 26-percent greater flow over the stock equipment. The stock rubber connections have also been replaced with sturdy silicone couplers to ensure solid connection between piping and intercooler. The improvements don’t stop with the hot-side piping. The cold-side piping received an overhaul as well, replacing the degradation-prone rubber construction with 5 layers of durable silicone complete with heat-resistant fibers, ensuring that the cold-side airflow stays cool. For added support, the single section of piping is reinforced with steel wire ensuring that it keeps its shape under heavy load. Speaking of shape, the Mishimoto Performance Cold-Side Intercooler Pipe features an elliptical shape to accommodate the increased size of the Mishimoto Performance Radiator. The result of adding the Mishimoto full Performance Intercooler and Piping kit to your 2013-2018 Focus ST in conjunction with the Mishimoto Performance intake is a 21-percent increase in flow of the charged air through the system, and an additional 8hp and 10ft/lb of torque boost on top of intake and intercooler gains on the stock tune.
Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.- 8 hp/ 10 tq gains when combined with other Mishimoto Focus ST parts
- 10-percent increase in volume over stock cold side pipe
- 14-percent increase in volume over stock hot side pipe
-
Open up the flow of the charged air in your 2013-2018 Ford Focus ST with the Mishimoto Performance Intercooler Piping Kit. The piping equipped on the 2.0L EcoBoost engine from the factory is riddled with bends, restrictive piping diameters, and degradation-prone materials, all of which slow the air to and from your intercooler putting a strain on the FOST?s performance. We here at Mishimoto’strive to free the flow of the charged air in your sporty Focus. To start we removed the turbo muffler from the design of the hot-side stock piping, and reduced the amount of bends giving the airflow a more direct flow from the turbo to the intercooler. On top of the reduction of bends, we increased the inner diameter of the piping to 2.5 inches of high-grade aluminum, allowing for a 14-percent increase in volume and 26-percent greater flow over the stock equipment. The stock rubber connections have also been replaced with sturdy silicone couplers to ensure solid connection between piping and intercooler. The improvements don?t stop with the hot-side piping. The cold-side piping received an overhaul as well, replacing the degradation-prone rubber construction with 5 layers of durable silicone complete with heat-resistant fibers, ensuring that the cold-side airflow stays cool. For added support, the single section of piping is reinforced with steel wire ensuring that it keeps its shape under heavy load. Speaking of shape, the Mishimoto Performance Cold-Side Intercooler Pipe features an elliptical shape to accommodate the increased size of the Mishimoto Performance Radiator.The result of adding the Mishimoto full Performance Intercooler and Piping kit to your 2013-2018 Focus ST in conjunction with the Mishimoto Performance intake is a 21-percent increase in flow of the charged air through the system, and an additional 8hp and 10ft/lb of torque boost on top of intake and intercooler gains on the stock tune.
Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.- 8 hp/ 10 tq gains when combined with other Mishimoto Focus ST parts
- 10-percent increase in volume over stock cold side pipe
- 14-percent increase in volume over stock hot side pipe
-
Increase the airflow to your 1.6L EcoBoost with the Mishimoto Fiesta ST cold-side intercooler pipe kit for the 2014-2019 Ford Fiesta ST. The stock cold-side Fiesta ST intercooler pipe is riddled with restrictive bends and small diameter sections that impede airflow. These Mishimoto intercooler pipes have a 2.5in diameter and are mandrel-bent to eliminate any restrictions. When you’re turning up the boost on your Fiesta, these pipes will have no problem supporting the power you throw at them. Plastic is always a material Mishimoto’strives to eliminate, and the stock cold-side Fiesta ST intercooler pipe is unacceptable. The stock pipe is constructed completely of weak plastic that is bound to leak over time. The Mishimoto cold-side intercooler pipe is comprised entirely of lightweight aluminum and features a CNC-machined sensor flange for the stock pressure sensor, a port for meth injection or a boost gauge, and a silicone hose and CNC plug to allow deletion of the stock sound symposer system. Mishimoto’s cold-side Fiesta ST intercooler piping features durable silicone couplers and stainless steel T-bolt clamps to ensure leak free connections. Installation can completed in under 30 minutes with no modifications to the engine bay, as these cold-side Fiesta ST intercooler pipes are a direct fit and work with both the stock and Mishimoto performance Fiesta ST intercoolers. Mishimoto’s Fiesta ST cold-side intercooler piping is available in either a polished or wrinkle black finish, and, like all of our Fiesta ST performance parts, includes the Mishimoto Lifetime Warranty.
Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.
2014-2016 Ford Fiesta ST 1.6 Liter- Replaces weak stock cold-side plastic intercooler pipe with 2.5-in lightweight mandrel-bent aluminum pipe
- 7 whp and 8 wtq gains over the stock cold side pipe with no tuning necessary
- Installs in under 30 minutes
-
Increase the airflow to your 1.6L EcoBoost with the Mishimoto hot-side Fiesta ST intercooler pipe kit for the 2014-2019 Ford Fiesta ST. The stock hot-side Fiesta ST intercooler pipe is riddled with restrictive bends and small diameter sections that impede airflow. These Mishimoto intercooler pipes have a 2.5in diameter and are mandrel-bent to eliminate any restrictions. When you’re turning up the boost on your Fiesta, these pipes will have no problem supporting the power you throw at them. These hot-side Fiesta ST intercooler pipes feature durable silicone couplers and stainless steel T-bolt clamps to insure leak free connections. Installation can completed in under 30 minutes with no modifications to the engine bay, as Mishimoto’s Fiesta ST intercooler piping is a direct fit and works with both the stock and Mishimoto performance Fiesta ST intercooler. The Mishimoto Fiesta ST hot-side intercooler pipe kit is available in either a polished or wrinkle black finish and, like all of our Fiesta ST parts, includes the Mishimoto Lifetime Warranty.
Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.
2014-2016 Ford Fiesta ST 1.6 Liter- Replaces the small and restrictive hot side intercooler pipe with 2.5-in lightweight mandrel-bent aluminum pipe
- 4 whp and 5 wtq gains over the stock hot side pipe with no tuning necessary
- Installs in under 30 minutes
-
Increase the airflow to your 1.6L EcoBoost with the Mishimoto hot-side Fiesta ST intercooler pipe kit for the 2014-2019 Ford Fiesta ST. The stock hot-side Fiesta ST intercooler pipe is riddled with restrictive bends and small diameter sections that impede airflow. These Mishimoto intercooler pipes have a 2.5in diameter and are mandrel-bent to eliminate any restrictions. When you’re turning up the boost on your Fiesta, these pipes will have no problem supporting the power you throw at them. These hot-side Fiesta ST intercooler pipes feature durable silicone couplers and stainless steel T-bolt clamps to insure leak free connections. Installation can completed in under 30 minutes with no modifications to the engine bay, as Mishimoto’s Fiesta ST intercooler piping is a direct fit and works with both the stock and Mishimoto performance Fiesta ST intercooler. The Mishimoto Fiesta ST hot-side intercooler pipe kit is available in either a polished or wrinkle black finish and, like all of our Fiesta ST parts, includes the Mishimoto Lifetime Warranty.
Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.
2014-2016 Ford Fiesta ST 1.6 Liter- Replaces the small and restrictive hot side intercooler pipe with 2.5-in lightweight mandrel-bent aluminum pipe
- 4 whp and 5 wtq gains over the stock hot side pipe with no tuning necessary
- Installs in under 30 minutes
-
Increase the airflow to your 1.6L EcoBoost with Mishimoto intercooler piping for the 2014-2019 Ford Fiesta ST. The stock Fiesta ST intercooler piping is riddled with restrictive bends and small diameter sections that impede airflow. These Mishimoto intercooler pipes have a 2.5in diameter and are mandrel-bent to eliminate any restrictions. When you’re turning up the boost on your hot hatch, Mishimoto’s Fiesta ST intercooler piping will have no problem supporting the power you throw at them. The Mishimoto Fiesta ST cold-side intercooler pipe features a CNC-machined sensor flange for the stock pressure sensor, a port for meth injection or a boost gauge, and a silicone hose and CNC plug to allow deletion of the stock sound symposer system. Mishimoto’s Fiesta ST intercooler piping features durable silicone couplers and stainless steel T-bolt clamps for reliable holding power when you’re hitting full boost on a long straight. Installation requires no modifications to the engine bay, as these Fiesta ST intercooler pipes are a direct fit and work with both the stock and the Mishimoto Fiesta ST intercooler. Mishimoto Fiesta ST intercooler piping is available in either a polished or wrinkle black finish, and, like all of our Fiesta ST performance parts, includes the Mishimoto Lifetime Warranty.
Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.
2014-2016 Ford Fiesta ST 1.6 Liter- 2.5-in hot-side and cold-side mandrel-bent aluminum pipes replaces restrictive stock intercooler pipes and couplers
- Full kit provides 7 whp and 8 whp gains over stock piping
- Installs in under one hour
-
Increase the airflow to your 1.6L EcoBoost with Mishimoto intercooler piping for the 2014-2019 Ford Fiesta ST. The stock Fiesta ST intercooler piping is riddled with restrictive bends and small diameter sections that impede airflow. These Mishimoto intercooler pipes have a 2.5in diameter and are mandrel-bent to eliminate any restrictions. When you’re turning up the boost on your hot hatch, Mishimoto’s Fiesta ST intercooler piping will have no problem supporting the power you throw at them. The Mishimoto Fiesta ST cold-side intercooler pipe features a CNC-machined sensor flange for the stock pressure sensor, a port for meth injection or a boost gauge, and a silicone hose and CNC plug to allow deletion of the stock sound symposer system. Mishimoto’s Fiesta ST intercooler piping features durable silicone couplers and stainless steel T-bolt clamps for reliable holding power when you’re hitting full boost on a long straight. Installation requires no modifications to the engine bay, as these Fiesta ST intercooler pipes are a direct fit and work with both the stock and the Mishimoto Fiesta ST intercooler. Mishimoto Fiesta ST intercooler piping is available in either a polished or wrinkle black finish, and, like all of our Fiesta ST performance parts, includes the Mishimoto Lifetime Warranty.
Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.
2014-2016 Ford Fiesta ST 1.6 Liter- 2.5-in hot-side and cold-side mandrel-bent aluminum pipes replaces restrictive stock intercooler pipes and couplers
- Full kit provides 7 whp and 8 whp gains over stock piping
- Installs in under one hour
-
Looking for a way to improve spool-up, increase power potential, and improve engine bay aesthetics on your EcoBoost Mustang? Mishimoto has you covered with a new intercooler pipe kit designed specifically for the 2015-2023 Ford Mustang EcoBoost. This EcoBoost Mustang kit features 2.5 hot-side and 2.75in cold-side mandrel-bent aluminum piping for smooth airflow, and four-layer silicone couplers with heat-resistant embedded fibers for improved tolerance against heat and pressure. This 2015-2023 Mustang kit also includes high-quality stainless steel T-bolt clamps for consistent and reliable holding power. Installation is simple, requires no modification to any parts in the engine bay, and can be completed in under one hour. The precision CNC-machined BPV flange allows you to retain the stock EcoBoost Mustang BPV. The Mishimoto Mustang EcoBoost Intercooler Pipe Kit is available in either polished or wrinkle black finish and lilke our entire line of Mustang parts, includes the Mishimoto Lifetime Warranty.
Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.
2015 Ford Mustang EcoBoost 2.3 Liter 6R80, 2015 Ford Mustang EcoBoost 2.3 Liter MT82, 2015 Ford Mustang EcoBoost Premium 2.3 Liter 6R80, 2015 Ford Mustang EcoBoost Premium 2.3 Liter MT82- Replaces hot-side and cold-side intercooler pipes and couplers
- Direct-fit for the 2015-2023 Ford Mustang EcoBoost
- Installs in under one hour
Showing 217–228 of 325 results