Fuel Filters

AEM’s High Volume Fuel Filter is capable of supporting fuel flow for vehicles up to 500 horsepower. Double O-ring seals deliver superior leak protection and the filter’s 6061 aluminum body provides excellent durability. The standard high-flow filter element is replaceable and available at most auto parts stores so you aren’t stuck if you need to replace it during a race. This unit is a direct-fit replacement for most Honda/Acura applications or used as a floating application on most vehicles.
High Volume Fuel Filter, Black Anodized, Fits Acura & Honda, Inlet: 14mm X 1.5, Outlet: 12mm X 1.25

• Thread sizes for filter are 12×1.25 top and 14×1.50 bottom for fittings (universal applications)
• Uses standard high flow replacement filter (NAPA Gold Part #PN4950 or FRAM part #CH6069)
• Fits in stock Honda/Acura location or as a floating application on any vehicle
• Supports flow for racing and Motorsports vehicles up to 500 horsepower
• No additional parts required for installation (Honda/Acura Only)
• Large hexes machined into top and bottom for easy disassembly

AEM’s Universal High Flow -10 AN Inline Filter is specifically engineered for maximizing flow without sacrificing filtration, and is designed for ease of installation. The end caps are machined with -10AN female fittings that allow the filter to flow up to 12.32 gpm @ 45 PSI and 2.63 gpm @ 6 PSI. Machined O-ring receiver grooves on the end caps ensure against leaks, and all sealing o-rings and gaskets are made of Viton for outstanding performance when using gasoline, alcohol or gasoline/alcohol blended fuels. The commonly available replacement filter cartridges filter particles as small as 7 microns. The filter’s standard 2″ OD allows for easy mounting virtually anywhere in the vehicle for easy access.
Universal High Volume Fuel Filter, Inlet -10AN, Outlet -10AN, 2 inch diameter

• Viton o-rings and gaskets ensure outstanding performance when using gasoline, alcohol or gasoline/alcohol blended fuels
• Laser etched with AEM logo, flow and comes with filter replacement information
• End caps are machined with -10 AN female fittings with o-ring receiver groove
• End caps have pressure intensifiers for greater sealing of end gaskets
• Machined from 6061-T6 aluminum with a black hard anodized finish
• Flows up to 12.32 gpm @ 45 PSI and 2.63 gpm @ 6 PSI
• Commonly available replacement filter cartridges
• Filters particles as small as 7 microns
• 2″ OD x 10″ length for easy mounting

Can be used with the following Fuel Filters:?12301, 12304, 12306, 12307, 12321, 12324, 12330, 12335, 12340, 12345, 12346, 12347, 12348, 12349, 12350, 12351, 12354, 12375, 12377, 12378, 12379, 12385, 12387, 12388, 12389.
Filter Mounting Bracket, Billet Clear-Coat, for 2301/12304, 12321/12324, Fits All 2″ OD Filter Housings.
fuel filter/pump billet bracket; 2″ bracket that can be used with filter P/N 12301, 12304, 12306, 12307, 12321, 12324, 12351, 12354, 12331.

Ever take a fuel bath when changing your filter? We have a solution! Cleaning and replacing you filter elements used to mean draining your gas tank. The new Aeromotive Shutoff Valve Fuel Filters allow you to shutoff fuel flow and replace your filter elements with little or no fuel loss. Both feature 100 micron stainless steel elements and are recommended for use between the fuel cell or sumped tank and the fuel pump inlet. ORB-12 ports. 100 micron stainless steel (coarse) cleanable element. Dimensions: 8.82? long x 2.5? diameter. Proprietary stainless steel shutoff valve design. Type II bright dip black anodized assembly and red anodized billet aluminum shutoff valve handle. Perfect for pre-pump filtration.
Filter w/ Shutoff Valve, 100-m Stainless Mesh element, In-Line, ORB-12 Port, Bright-Dip Black, 2-12″ OD.
shutoff valve fuel filter; proprietary stainless steel shutoff valve design; 100-micron stainless steel element; Type II bright dip black anodized assembly and red anodized billet aluminum shutoff valve handle; 8.875″ long x 2.5″ diameter

AN-08, 100 micron stainless steel element, black anodize finish An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For 200 ? 3,000 plus HP applications, our filter assemblies offer unmatched flow, ease of installation and maintenance, along with the impeccable machining and finish you?ve come to expect from all Aeromotive components. High-flow, 100-micron Stainless steel?replaceable element. Flows 2,000 lb/hr with a pressure drop of less than 1 PSI. Males AN-08. All filter assemblies feature an O-ring for positive sealing in high pressure applications. CNC-machined from 6061-T6 aircraft aluminum. Bright dip black anodized finish for a corrosion resistant, show car quality appearance.
Filter, In-Line, 100-m Stainless Mesh Element, AN-08 Male, Bright-Dip Black, 2″ OD.
In-Line filter; In-Line Filter, AN-08 size with a 100 micron stainless steel element and black anodize finish

Aeromotive Inc. is a true high performance aftermarket manufacturer specializing in fuel delivery and fuel delivery components. Utilizing aerospace tolerances and procedures, three generations oftrack experience, and a meticulous approach to engineering, Aeromotive Fuel Systems has become the absolute pinnacle of performance fuel delivery.
Filter, In-Line, 10-m Fabric Element, AN-08 Male, Bright-Dip Black, 2″ OD.
In-Line filter; In-Line Filter, AN-08 size with a 10 micron cellulose element and black anodize finish

AN-08, 40 micron stainless steel element, black anodize finish An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For 200 ? 3,000 plus HP applications, our filter assemblies offer unmatched flow, ease of installation and maintenance, along with the impeccable machining and finish you?ve come to expect from all Aeromotive components. High-flow, 40-micron stainless steel cleanable element. Flows 2,000 lb/hr with a pressure drop of less than 1 PSI. Males AN-08. All filter assemblies feature an O-ring for positive sealing in high pressure applications. CNC-machined from 6061-T6 aircraft aluminum. Bright dip black anodized finish for a corrosion resistant, show car quality appearance.
Filter, In-Line, 40-m Stainless Mesh Element, AN-08 Male, Bright-Dip Black, 2″ OD.
In-Line filter; In-Line Filter, AN-08 size with a 40 micron stainless steel element and black anodize finish

AN-06, 100 micron stainless steel element, black anodize finish An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For 200 ? 3,000 plus HP applications, our filter assemblies offer unmatched flow, ease of installation and maintenance, along with the impeccable machining and finish you?ve come to expect from all Aeromotive components. High-flow, 100-micron stainless mesh replaceable element. Flows 2,000 lb/hr with a pressure drop of less than 1 PSI. Male AN-06. All filter assemblies feature an O-ring for positive sealing in high pressure applications. CNC-machined from 6061-T6 aircraft aluminum. Bright dip black anodized finish for a corrosion resistant, show car quality appearance.
Filter, In-Line, 100-m Stainless Mesh Element, AN-06 Male, Bright-Dip Black, 2″ OD.
In-Line filter; In-Line Filter, AN-06 size with a 100 micron stainless steel element and black anodize finish

An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For 200 ? 3,000 plus HP applications, our filter assemblies offer unmatched flow, ease of installation and maintenance, along with the impeccable machining and finish you?ve come to expect from all Aeromotive components. High-flow, 10-micron fabric (fine) replaceable element. Flows 2,000 lb/hr with a pressure drop of less than 1 PSI. Compact size: 5.5″ long x 2″ diameter. ORB-10 ports. Fittings available to adapt these filters to AN-10, -08 and -06 line sizes.? All filter assemblies feature an O-ring for positive sealing in high pressure applications. CNC-machined from 6061-T6 aircraft aluminum. Bright dip red anodized finish for a corrosion resistant, show car quality appearance.
Filter, In-Line, 10-m Fabric Element, ORB-10 Port, Bright-Dip Red, 2″ OD.
In-line, high-flow fuel filter; red anodized; 10-micron fabric element; compact size: 5.5″ long x 2″ diameter.

AN-10 10-micron microglass element, red anodize finish. Designed for use with gas and alcohol fuels. An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For 200 ? 3,000 plus horsepower applications, our filter assemblies offer unmatched flow, ease of installation and maintenance, and the impeccable machining and finish you?ve come to expect from all Aeromotive components.
Filter, In-Line, 10-m Microglass Element, ORB-10 Port, Bright-Dip Red, 2″ OD.
In-Line filter; In-Line Filter, AN-10 size with a 10 micron microglass element and red anodize finish

An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For 200 ? 3,000 plus HP applications, our filter assemblies offer unmatched flow, ease of installation and maintenance, along with the impeccable machining and finish you?ve come to expect from all Aeromotive components. High-flow, 100-micron stainless steel (coarse) cleanable element. Flows 2,000 lb/hr with a pressure drop of less than 1 PSI. Compact size: 5.5″ long x 2″ diameter. ORB-10 ports. Fittings available to adapt these filters to AN-10, -08 and -06 line sizes. All filter assemblies feature an O-ring for positive sealing in high pressure applications. CNC-machined from 6061-T6 aircraft aluminum. Bright dip red anodized finish for a corrosion resistant, show car quality appearance.?100-micron filters are designed for use between the fuel tank and the fuel pump to protect the pump.
Filter, In-Line, 100-m Stainless Mesh Element, ORB-10 Port, Bright-Dip Red, 2″ OD.
In-line, high-flow fuel filter; red anodized; 100-micron stainless steel element; compact size: 5.5″ long x 2″ diameter.

Aeromotive Inc. is a true high performance aftermarket manufacturer specializing in fuel delivery and fuel delivery components. Utilizing aerospace tolerances and procedures, three generations oftrack experience, and a meticulous approach to engineering, Aeromotive Fuel Systems has become the absolute pinnacle of performance fuel delivery.
Filter, In-Line, 100-m Stainless Mesh Element, AN-10 Male, Bright-Dip Black, 2″ OD.
In-Line filter; In-Line Filter, AN-10 size with a 100 micron stainless steel element and black anodize finish