-
aFe CONTROL Leveling Kits are made from 6061 billet aluminum and provide a 2.5-Inch lift in the front and a 1-Inch lift in the rear to provide better off-road performance while also eliminating the *nose-down rake* notorious on stock trucks. This kit includes two spacers for each strut, allowing for a range of lift heights. Both the shim and pre-load spring spacers together make for the maximum lift allowable without compromising the efficiency of the stock shock. Using one or the other will make for a low or moderate lift height. Installation of these leveling spacers can be done at home with the proper tools and safety precautions. Installing these spacers requires disassembly of the strut/spring. A spring compressor is required to install the pre-load spring spacer.
aFe CONTROL 2.5 IN Front & 1 IN Rear Lift Kit Toyota Tundra/Sequoia TRD Pro 22-24 -
aFe CONTROL Leveling Kits are made of billet aluminum and provide an adequate lift to the front of your vehicle to improve off-road performance while also eliminating the a**nose-down rakea*? from the factory stance.High quality hardware is used for strength and durability. New connecting rods are included to reposition the front ride height sensors so all driving modes remain available. Polyurethane spring isolators allow the top plates of the OE shocks to be switched in order to prevent the springs from bowing. Installation of these leveling spacers can be done at home with the proper tools and safety precautions. Installing these spacers does require disassembly of the strut/spring. A spring compressor is not required due to the light amount of preload on the stock coil springs and extended shaft studs.
aFe CONTROL 3.0 IN Leveling Kit Red RAM 1500 TRX 21-23 V8-6.2L (sc) -
RaceRunner front leveling coil springs raise the front of your JL approximately 2″ from factory ride height for improved ground clearance over rough terrain, overall vehicle control and offers a level ride height. These RaceRunner coil springs perform with factory or RaceRunner series shocks. Front Leveling Springs: 2″ Front Leveling Coil Springs Improve Handling and Offer More Ground Clearance Over Rough Terrain. Cold Formed Chrome Silicone Mat erials: Precision Designed and Manufactured Form Quality Materials For Durability and Longevity. Easy Installation: Factory Designed Configuration. No Modifications Required.
aFe CONTROL RaceRunner Front Coil Springs Jeep Wrangler (JL) 18-23 L4-2.0L (t)/V6-3.6L -
Installing Belltech Strut Spacers on today’s late model strut equipped trucks offer an application specific, economical and simple installation solution to effectively level the front end of your new truck or SUV. This allows the needed clearance for larger aggressive offroad wheel/tire combinations.
Belltech’s fabricated steel front leveling strut spacers offer a cost effective solution to level the front end of your truck or SUV. Does not require oem strut disassembly to install. Lifetime warranty
Ships in 1 box
2004-2015 Nissan Titan 2wd/4wd (All Cabs) 2.5″ Strut Spacer -
Installing Belltech Strut Spacers on today’s late model strut equipped trucks offer an application specific, economical and simple installation solution to effectively level the front end of your new truck or SUV. This allows the needed clearance for larger aggressive offroad wheel/tire combinations.
Belltech’s fabricated steel front leveling strut spacers offer a cost effective solution to level the front end of your truck or SUV. Does not require oem strut disassembly to install. Lifetime warranty.
Ships in 1 box
2004-2018 Ford F150 2wd/4wd (All Cabs) 2.5″ Strut Spacer -
Installing Belltech Strut Spacers on today’s late model strut equipped trucks offer an application specific, economical and simple installation solution to effectively level the front end of your new truck or SUV. This allows the needed clearance for larger aggressive offroad wheel/tire combinations.
Belltech’s fabricated steel front leveling strut spacers offer a cost effective solution to level the front end of your truck or SUV. Does not require oem strut disassembly to install. Lifetime warranty
Ships in 1 box
2005-2017 Nissan Frontier/Xterra 2wd/4wd (All Cabs) 2.5″ Strut Spacer -
Installing Belltech Strut Spacers on today’s late model strut equipped trucks offer an application specific, economical and simple installation solution to effectively level the front end of your new truck or SUV. This allows the needed clearance for larger aggressive offroad wheel/tire combinations.
Belltech’s fabricated steel front leveling strut spacers offer a cost effective solution to level the front end of your truck or SUV. Does not require oem strut disassembly to install. Lifetime warranty
Ships in 1 box
2005-2018 Ford F250/F350SD 4wd 2.5″ Spring Spacer -
Installing Belltech Strut Spacers on today’s late model strut equipped trucks offer an application specific, economical and simple installation solution to effectively level the front end of your new truck or SUV. This allows the needed clearance for larger aggressive offroad wheel/tire combinations.
Belltech’s fabricated steel front leveling strut spacers offer a cost effective solution to level the front end of your truck or SUV. Does not require oem strut disassembly to install. Lifetime warranty.
Ships in 1 box
2005-2020 Toyota Tacoma 2wd (All Cabs)(5 LUG) 2.5″ Strut Spacer -
Installing Belltech Strut Spacers on today’s late model strut equipped trucks offer an application specific, economical and simple installation solution to effectively level the front end of your new truck or SUV. This allows the needed clearance for larger aggressive offroad wheel/tire combinations.
Belltech’s fabricated steel front leveling strut spacers offer a cost effective solution to level the front end of your truck or SUV. Does not require oem strut disassembly to install. Lifetime warranty
Ships in 1 box
2005-2020 Toyota Tacoma 2wd/4wd (All Cabs) (6 Lug) 2.5″ Strut Spacer -
Installing Belltech Strut Spacers on today’s late model strut equipped trucks offer an application specific, economical and simple installation solution to effectively level the front end of your new truck or SUV. This allows the needed clearance for larger aggressive offroad wheel/tire combinations.
Belltech’s fabricated steel front leveling strut spacers offer a cost effective solution to level the front end of your truck or SUV. Does not require oem strut disassembly to install. Lifetime warranty
Ships in 1 box
2007-2017 Jeep Wrangler Rubicon (JK/JKU) 2.5″F/2″R Spring Spacer Set -
Belltech has developed the solution to correct the lackluster handling and performance of today’s factory strut equipped trucks and SUV’s, utilizing the next generation valving technology of our new Street Performance Shock line. In true Belltech style, combining our new leveling strut spacers with both front and rear Street Performance shock absorbers you receive a complete solution to level your stance and rejuvenate those worn out oem shocks and struts.
Belltech’s leveling kits offer both front struts and rear shocks as well as front spacers to give a complete solution to lift your truck and replace worn oem dampers to restore ride quality and performance.
Ships in 1 box
2007-2018 Chevrolet Silverado/Sierra 1500 2wd/4wd (All Cabs) 3″ -
Installing Belltech Strut Spacers on today’s late model strut equipped trucks offer an application specific, economical and simple installation solution to effectively level the front end of your new truck or SUV. This allows the needed clearance for larger aggressive offroad wheel/tire combinations.
Belltech’s fabricated steel front leveling strut spacers offer a cost effective solution to level the front end of your truck or SUV. Does not require oem strut disassembly to install. Lifetime warranty
Ships in 1 box
2007-2018 Chevrolet Silverado/Sierra 1500 / GM SUV / 2wd/4wd (All Cabs) 2″ Strut Spacer
Showing 1–12 of 46 results