Water Meth Kits

Snow Performance has combined performance, quality, and ease of installation in this new water-methanol injection kit designed for all Chevy / GMC LBZ / LLY/ LMM/ LML / L5P Duramax Ford owners who demand colder EGTs while towing heavy loads. The Diesel Stage 3 Boost Cooler utilizes a 2D mapped controller that commands injection based on boost pressure and EGTs (exhaust gas temperatures) to maintain extremely cold air inlet temperatures, 100-300 EGT decreases, decreased emissions, cleaner engine components, and increased fuel economy all while giving 65+ HP to help pull large hills with easy effort while towing. A must have for the diesel enthusiast that is concerned about the longevity of his truck that sees heavy towing. None invasive, the Diesel Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no drilling/marring of the interior needs to take place or additional gauge pods need to be purchased. Functions as a boost gauge, water-meth controller and EGT monitor all in one! Concerned about warranty? The Snow Performance Stage 3 does not leave a signature on the vehicle leaving your diesel truck with its warranty intact. 7 Gal Tank included for trip ready installation. Recommended for all daily driven Chevy /GMC LBZ / LLY / LMM / LML / L5P Duramax owners that see heavy towing where EGTs become dangerously high. Need a CARB E.O.# for your state? No problem! See part# SNO-50100 for 50-State legal system (C.A.R.B E.0.# D-723)
Diesel Stage 3 Boost CoolerWater-Methanol Injection Kit Chevy/GMC LBZ/LLY/LMM/LML/L5P Duramax (Stainless Steel Braided Line; 4AN Fittings).
Kit Contents: 300 PSI Extreme Environment (Sealed) UHO Pump, 7 Gal Tank Upgrade, Adjustable Progressive Stage 3 Controller/Harness, (3) 1′, (1) 2′, (1) 20′ Stainless Steel Braided Line, EGT Probe Assembly, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Dual Nozzle Upgrade, (2) High Flow Solenoid Upgrade, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve
2001-2004 Chevy/GMC 6.6L LBZ Duramax, 2004-2007 Chevy GMC 6.6L LLY/LBZ Duramax, 2007-2010 Chevy/GMC 6.6L LMM Duramax, 2011-2016 Chevy/GMC 6.6L LML Duramax, 2017+ Chevy/GMC L5P Duramax

Lower EGTs 100-300 degrees and increase HP by 65+ with a cleaner, cooler running Dodge 5.9 Cummins! The Snow Performance Diesel Stage 2 Boost Cooler is available for all 5.9 Cummins owners looking to have the benefit of water-methanol injection through out the 5.9Ls boost range. The Stage 2 utilizes a progressive VC-50 controller (52mm gauge) that commands two water-methanol nozzles that proportionally inject more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. 7 Gal Tank included for trip ready installation. Recommended for all daily driven 5.9L Dodge Cummins that see light towing.
Diesel Stage 2 Boost Cooler Water-Methanol Injection Kit Dodge 5.9L Cummins (Stainless Steel Braided Line, 4AN Fittings)
Kit Contents: 300 PSI Extreme Environment (Sealed) UHO Pump, 7 Gal Tank Upgrade, Adjustable Progressive VC-50 Controller/Harness, (2) 1′, (1) 2′, (1) 20′ Stainless Steel Braided Line, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Dual Nozzle Upgrade, H
1994-2007 Dodge Ram 5.9L Cummins

Lower EGTs 100-300 degrees and increase HP by 65+ with a cleaner, cooler running Dodge 5.9 Cummins! The Snow Performance Diesel Stage 2 Boost Cooler is available for all 5.9 Cummins owners looking to have the benefit of water-methanol injection through out the 5.9Ls boost range. The Stage 2 utilizes a progressive VC-50 controller (52mm gauge) that commands two water-methanol nozzles that proportionally inject more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. 7 Gal Tank included for trip ready installation. Recommended for all daily driven 5.9L Dodge Cummins that see light towing.
Diesel Stage 2 Boost CoolerWater-Methanol Injection Kit Dodge 5.9L Cummins (Stainless Steel Braided Line; 4AN Fittings).

Snow Performance has combined performance, quality and easy installation in this new water-methanol injection system engineered specifically for 2015+ Ford Mustangs equipped with the 2.3L EcoBoost engine. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all 2015+ Ford Mustang equipped with the 2.3L EcoBoost engine.
Stage 2.5 Boost Cooler 2.0/2.3 Ford Eco Boost Direct Port Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings, No Tank).
2.0/2.3 Ford Eco Boost

Snow Performance has combined performance, quality, and ease of installation in this new water-methanol injection kit designed for all Ford 7.3 / 6.0 / 6.4 / 6.7 Powerstroke owners who demand colder EGTs while towing heavy loads. The Diesel Stage 3 Boost Cooler utilizes a 2D mapped controller that commands injection based on boost pressure and EGTs (exhaust gas temperatures) to maintain extremely cold air inlet temperatures, 100-300 EGT decreases, decreased emissions, cleaner engine components, and increased fuel economy all while giving 65+ HP to help pull large hills with easy effort while towing. A must have for the diesel enthusiast that is concerned about the longevity of his truck that sees heavy towing. None invasive, the Diesel Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no drilling/marring of the interior needs to take place or additional gauge pods need to be purchased. Functions as a boost gauge, water-meth controller and EGT monitor all in one! Concerned about warranty? The Snow Performance Stage 3 does not leave a signature on the vehicle leaving your diesel truck with its warranty intact. 7 Gal Tank included for trip ready installation. Recommended for all daily driven Ford 7.3 / 6.0 / 6.4 / 6.7 Powerstrokes that see heavy towing where EGTs become dangerously high. Need a CARB E.O.# for your state? No problem! See part# SNO-50100 for 50-State legal system (C.A.R.B E.0.# D-723)
Diesel Stage 3 Boost CoolerWater-Methanol Injection Kit Ford 7.3/6.0/6.4/6.7 Powerstroke (Red High Temp Nylon Tubing; Quick-Connect Fittings).

Snow Performance has combined performance, quality and easy installation in this new water-methanol injection system engineered specifically for 2015+ Ford Mustangs equipped with the 2.3L EcoBoost engine. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all 2015+ Ford Mustang equipped with the 2.3L EcoBoost engine.
Stage 2.5 Boost Cooler 2.0/2.3 Ford Eco Boost Direct Port Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings).
2.0/2.3 Ford Eco Boost

Lower EGTs 100-300 degrees and increase HP by 65+ with a cleaner, cooler running Ford 7.3 / 6.0 / 6.4 / 6.7 Powerstroke! The Snow Performance Diesel Stage 2 Boost Cooler is available for all Ford Powerstroke owners looking to have the benefit of water-methanol injection through out the 6.7Ls boost range. The Stage 2 utilizes a progressive VC-50 controller (52mm gauge) that commands two water-methanol nozzles that proportionally inject more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. 7 Gal Tank included for trip ready installation. Recommended for all daily driven Ford Powerstrokes that see light towing.
Diesel Stage 2 Boost CoolerWater-Methanol Injection Kit Ford 7.3/6.0/6.4/6.7 Powerstroke (Stainless Steel Braided Line; 4AN Fittings).

Lower EGTs 100-300 degrees and increase HP by 65+ with a cleaner, cooler running Ford 7.3 / 6.0 / 6.4 / 6.7 Powerstroke! The Snow Performance Diesel Stage 2 Boost Cooler is available for all Ford Powerstroke owners looking to have the benefit of water-methanol injection through out the 6.7Ls boost range. The Stage 2 utilizes a progressive VC-50 controller (52mm gauge) that commands two water-methanol nozzles that proportionally inject more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. 7 Gal Tank included for trip ready installation. Recommended for all daily driven Ford Powerstrokes that see light towing.
Diesel Stage 2 Boost Cooler Water-Methanol Injection Kit Ford 7.3/6.0/6.4/6.7 Powerstroke (Stainless Steel Braided Line, 4AN Fittings)
Kit Contents: 300 PSI Extreme Environment (Sealed) UHO Pump, 7 Gal Tank Upgrade, Adjustable Progressive VC-50 Controller/Harness, (2) 1′, (1) 2′, (1) 20′ Stainless Steel Braided Line, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Dual Nozzle Upgrade, H
1994-2003 Ford 7.3 Powerstroke, 2003-2007 Ford 6.0 Powerstroke, 2008-2010 Ford 6.4 Powerstroke, 2011-2017 6.7 Ford Powerstroke

Snow Performance Water-Methanol Injection systems provide increased performance with or without nitrous. Water Methanol Injection cools your incoming air charge and increases the total octane effect of pump gas. This allows you to run increased timing which results in increased power and torque. When used with Nitrous, the need for timing retard is greatly reduced or eliminated. Boosted applications especially benefit from reduced intake temperatures. NX Water / Methanol systems include the latest technology and the highest quality components available. This innovative plate combines the performance and safety benefits of Water Methanol injection with the horsepower and throttle response improvements of a carburetor shear plate. This design places the water methanol nozzle in the center of the Carb bores for excellent cylinder to cylinder distribution. The system includes a high output water methanol pump, a 3 quart tank, filtered nozzles, push lock line as well as everything needed for the installation. Fits on Dominator or 4500 series intake flanges. Stage 2 systems are activated by a two dial electronic controller that progressively controls water methanol output by either boost or vacuum.
WATER METHANOL, GAS CARBURETED 4500 FLANGE, STAGE 1, WOT ACTIVATED, STAINLESS STEEL BRAIDED LINES, No Tank

Snow Performance Water-Methanol Injection systems provide increased performance with or without nitrous. Water Methanol Injection cools your incoming air charge and increases the total octane effect of pump gas. This allows you to run increased timing which results in increased power and torque. When used with Nitrous, the need for timing retard is greatly reduced or eliminated. Boosted applications especially benefit from reduced intake temperatures. NX Water / Methanol systems include the latest technology and the highest quality components available. This innovative plate combines the performance and safety benefits of Water Methanol injection with the horsepower and throttle response improvements of a carburetor shear plate. This design places the water methanol nozzle in the center of the Carb bores for excellent cylinder to cylinder distribution. The system includes a high output water methanol pump, a 3 quart tank, filtered nozzles, push lock line as well as everything needed for the installation. Fits on Dominator or 4500 series intake flanges. Stage 2 systems are activated by a two dial electronic controller that progressively controls water methanol output by either boost or vacuum.
WATER METHANOL, GAS CARBURETED 4500 FLANGE, STAGE 1, WOT ACTIVATED, STAINLESS STEEL BRAIDED LINES

Race gas quality fuel on pump gas! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 1 Boost Cooler water-methanol injection kit is available for all forced induction applications (supercharged/turbocharged) and uses a adjustable boost switch to inject a fixed amount of water-methanol into the system until boost goes below the switch set point. Proven to deliver 30-70 HP increases to all forced induction applications! This makes it a good choice for low to medium boost setups (1-15 PSI) and vehicles with a positive displacement supercharger looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user-chosen switch, such as a full throttle switch, nitrous switch, etc. Comes with 4AN fittings and stainless steel braided line to mount pump/tank in engine bay of vehicle. For trunk mount options see Part# SNO-40014-BRD, SNO-40012-BRD.
Stage 1 Boost CoolerForced Induction Water-Methanol Injection Kit (Red High Temp Nylon Tubing; Quick-Connect Fittings) No Tank .